DTS4210 DEFINITIONS ::= BEGIN -- ----------------------------------------------------------------- -- -- Imports -- ----------------------------------------------------------------- -- IMPORTS Integer32, OBJECT-TYPE, MODULE-IDENTITY, Unsigned32, NOTIFICATION-TYPE, TimeTicks, Gauge32 FROM SNMPv2-SMI OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF DisplayString FROM SNMPv2-TC DTSNetworkName, DTSAlarm64, DTSFlags32, EnabledDisabled, dts FROM DTS-COMMON; -- ----------------------------------------------------------------- -- -- MODULE definition -- ----------------------------------------------------------------- -- dts4210MIB MODULE-IDENTITY LAST-UPDATED "202111230741Z" ORGANIZATION "Moser-Baer AG" CONTACT-INFO "Moser-Baer AG support@mobatime.com" DESCRIPTION "This mib definition is used for DTS 4210 devices." REVISION "202111230741Z" DESCRIPTION "Add PTP unicast master table and C37.238 power profiles parameters" REVISION "202105181252Z" DESCRIPTION "Add frequency input named as 'F-In' as time source." REVISION "202103080911Z" DESCRIPTION "Rename DCF-HQ to GNSS-DCF." REVISION "201905070621Z" DESCRIPTION "Harmonize time & gnss features with dtsmenu." REVISION "201810190854Z" DESCRIPTION "Additional time source configuration options." REVISION "201806041411Z" DESCRIPTION "PTP-Unicast options." REVISION "201711021333Z" DESCRIPTION "Initial version of this module" ::= { dts 4210 } -- ----------------------------------------------------------------- -- -- Traps -- ----------------------------------------------------------------- -- dts4210Traps OBJECT IDENTIFIER ::= { dts4210MIB 0 } dts4210StartUp NOTIFICATION-TYPE STATUS current DESCRIPTION "The DTS subagent has startup." REFERENCE "NOTIFICATION_STARTUP" ::= { dts4210Traps 1 } dts4210Shutdown NOTIFICATION-TYPE STATUS current DESCRIPTION "The DTS subagent is shutdown." REFERENCE "NOTIFICATION_SHUTDOWN" ::= { dts4210Traps 2 } dts4210Alarm NOTIFICATION-TYPE OBJECTS { dts4210TrapAlMsgErrorNr, dts4210TrapAlMsgErrorState, dts4210TrapAlMsgErrorTime, dts4210TrapAlMsgErrorText } STATUS current DESCRIPTION "Alarm notification with attached (binded variables) alarm information. dts4210TrapAlMsgErrorNr, dts4210TrapAlMsgErrorState, dts4210TrapAlMsgErrorTime, dts4210TrapAlMsgErrorText" REFERENCE "NOTIFICATION_ALARM {OFS_TRAP_MODE, 4}, {OFS_TRAP_STATE, 76}" ::= { dts4210Traps 3 } dts4210StatusChanged NOTIFICATION-TYPE OBJECTS { dts4210SysStatus, dts4210TimeInfoSourceOffsetNSec, dts4210TimeInfoStratum, dts4210TimeInfoTimeSource } STATUS current DESCRIPTION "Notification for a status change. Attached are the variables dts4210SysStatus, dts4210TimeInfoSourceOffsetNSec, dts4210TimeInfoStratum, dts4210TimeInfoTimeSource" REFERENCE "NOTIFICATION_STATUS {OFS_DTS_STATE, 4}, {OFS_TINFO_SOURCETYPE, 1}, {OFS_TINFO_STRATUM, 1}" ::= { dts4210Traps 4 } dts4210ConfigChanged NOTIFICATION-TYPE OBJECTS { dts4210SysConfigChangedTime, dts4210NetworkPortConfigChangedTime, dts4210NetworkLAGIFConfigChangedTime, dts4210NetworkIPCfgConfigChangedTime, dts4210NetworkVLANConfigChangedTime, dts4210NetServicesConfigChangedTime, dts4210TSConfigChangedTime, dts4210RedundantLinkConfigChangedTime, dts4210NTPConfigChangedTime, dts4210PTPConfigChangedTime, dts4210GNSSConfigChangedTime, dts4210DCFINConfigChangedTime, dts4210FINConfigChangedTime, dts4210OutMainDCFConfigChangedTime, dts4210OutLinePulseFREQConfigChangedTime, dts4210OutLineSerialConfigChangedTime, dts4210OutLineIRIGConfigChangedTime, dts4210OutLineE1ConfigChangedTime, dts4210OutLineTZServerConfigChangedTime, dts4210RelayConfigChangedTime, dts4210MailConfigChangedTime, dts4210SnmpConfigChangedTime, dts4210SnmpV3ConfigChangedTime } STATUS current DESCRIPTION "Notification of a configuration change. Attached are all changed times of the different configuration sections." REFERENCE "NOTIFICATION_CFGCHANGE {OFS_GEN_UPDATE, 1}, {OFS_SERVICE_UPDATE, 1}, {OFS_TIME_UPDATE, 1}, {OFS_RED_UPDATE, 1}, {OFS_NTP_UPDATE, 1}, {OFS_PTP_UPDATE, 1}, {OFS_GNSS_UPDATE, 1}, {OFS_DCFIN_UPDATE, 1}, {OFS_F_IN_UPDATE, 1}, {OFS_DCF_UPDATE, 1}, {OFS_FREQPULS_UPDATE, 1}, {OFS_SERIAL_UPDATE, 1}, {OFS_IRIG_UPDATE, 1}, {OFS_E1_UPDATE, 1}, {OFS_TZSERVER_UPDATE, 1}, {OFS_AL_UPDATE, 1}, {OFS_MAIL_UPDATE, 1}, {OFS_SNMPV3_UPDATE, 1}, {OFS_SNMP_UPDATE, 1}" ::= { dts4210Traps 5 } dts4210Alive NOTIFICATION-TYPE OBJECTS { dts4210SysStatus, dts4210SysAlarms } STATUS current DESCRIPTION "Device alive notification. Will be send in the configured interval. Attached are the variables dts4210SysStatus and dts4210SysAlarms." REFERENCE "NOTIFICATION_ALIVE {OFS_TRAP_MODE, 4}, {OFS_TRAP_ALIVE_TO, 4}" ::= { dts4210Traps 6 } -- ----------------------------------------------------------------- -- -- System -- ----------------------------------------------------------------- -- dts4210System OBJECT IDENTIFIER ::= { dts4210MIB 1 } dts4210SysStatus OBJECT-TYPE SYNTAX DTSFlags32 MAX-ACCESS read-only STATUS current DESCRIPTION "DTS System status (32bit). Internal state of the DTS application software. Used for maintenance only. Bit 00: DTS configuration ready Bit 01: FPGA is ready Bit 02: FPGA running Bit 03: Reserved Bit 04: Reserved Bit 05: Reserved Bit 06: Reserved Bit 07: Reserved Bit 08: System time set Bit 09: Synchronisation is ok Bit 10: Time shifting in progress Bit 11: Running on NTP as backup Bit 12: Notification of a leap second Bit 13: Oscillator locked Bit 14: Reserved Bit 15: Reserved Bit 16: Master Bit 17: Slave Bit 18: Link ok Bit 19: Reserved Bit 20: Reserved Bit 21: Reserved Bit 22: Reserved Bit 23: Default MAC address Bit 24: Power supply is ok Bit 25: Restarting (never shown) Bit 26: High CPU usage Bit 27: High CPU temperatur Bit 28: High disk usage RamFS Bit 29: High disk usage RootFS Bit 30: High disk usage DTSCfgFS Bit 31: High disk usage DTSAppFS" REFERENCE "OFS_DTS_STATE, 4, VARTYPE_DWORD" ::= { dts4210System 1 } dts4210SysAlarms OBJECT-TYPE SYNTAX DTSAlarm64 (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION " Bit00=DTS restart Bit01=System warning Bit02=Supply voltage too low Bit03=Failure red. supply Bit04=Internal voltage to low Bit05=High offset to GNSS Bit06=High offset to PTP Bit07=High offset to GNSS-DCF Bit08=High offset to FREQ Bit09=High offset to E1 Bit10=PTP synch lost Bit11=GNSS-DCF synch lost Bit12=Frequncy-In synch lost Bit13=E1 synch lost Bit14=GNSS synch lost Bit15=Time source big offset Bit16=Time source fail strat Bit17=Time source fail TO Bit18=No valid time Bit19=NTP synch lost Bit20=Too high offset to NTP Bit21=NTP failed Bit22=Error bit22 Bit23=No valid timesource Bit24=No mail server Bit25=SNMP not running Bit26=Error bit26 Bit27=Error bit27 Bit28=Error bit28 Bit29=NTP Key Config error Bit30=Error bit30 Bit31=No DTS link Bit32=Change over slave->master Bit33=Too high offset to master Bit34=Oscillator not locked Bit35=SyncE not running Bit36=PTP not running Bit37=Error bit37 Bit38=Tele.-file invalid serial line 1 Bit39=Wrong time zone serial line 1 Bit40=Tele.-file invalid serial line 2 Bit41=Wrong time zone serial line 2 Bit42=Tele.-file invalid serial line 3 Bit43=Wrong time zone serial line 3 Bit44=Tele.-file invalid serial line 4 Bit45=Wrong time zone serial line 4 Bit46=Tele.-file invalid serial line 5 Bit47=Wrong time zone serial line 5 Bit48=Tele.-file invalid serial line 6 Bit49=Wrong time zone serial line 6 Bit50=Tele.-file invalid serial line 7 Bit51=Wrong time zone serial line 7 Bit52=Tele.-file invalid serial line 8 Bit53=Wrong time zone serial line 8 Bit54=Wrong time zone DCF output 1 Bit55=Wrong time zone DCF output 2 Bit56=Wrong time zone DCF output 3 Bit57=Wrong time zone DCF output 4 Bit58=Wrong time zone DCF Bit59=Error Time Zone TC1 Bit60=Error Time Zone TC2 Bit61=Extension 1 warning Bit62=Extension 2 warning Bit63=Extension 3 warning" REFERENCE "OFS_ALSTATE_ALARMS, 8, VARTYPE_BYTEARR" ::= { dts4210System 8 } dts4210Language OBJECT-TYPE SYNTAX INTEGER { english (0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Language of the menu text. 0: English" REFERENCE "OFS_GEN_LANG, 1, VARTYPE_BYTE" ::= { dts4210System 9 } dts4210Timezone OBJECT-TYPE SYNTAX Unsigned32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Time zone for the display and the alarm messages. 0: UTC 1-99: See user manual 800870, time zone table" REFERENCE "OFS_GEN_LOC_TZ, 1, VARTYPE_BYTE" ::= { dts4210System 10 } dts4210Password OBJECT-TYPE SYNTAX DisplayString (SIZE(0..14)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password for the menu and FTP." REFERENCE "OFS_GEN_PASSWORD, 15, VARTYPE_STRING" ::= { dts4210System 11 } dts4210PowerSupply OBJECT-TYPE SYNTAX INTEGER { singleMode (0), redundantMode (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the power supply. 0: single mode 1: redundant mode" REFERENCE "OFS_GEN_POWER, 1, VARTYPE_BYTE" ::= { dts4210System 12 } dts4210USBPort OBJECT-TYPE SYNTAX INTEGER { usbportOFF (0), usbportON (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the USB port. 0: USB port off 1: USB port on" REFERENCE "OFS_GEN_USBPORT, 1, VARTYPE_BYTE" ::= { dts4210System 13 } -- ----------------------------------------------------------------- -- -- System - Network information -- ----------------------------------------------------------------- -- dts4210NetworkInfo OBJECT IDENTIFIER ::= { dts4210System 20 } -- ----------------------------------------------------------------- -- -- System - Network information - Ports -- ----------------------------------------------------------------- -- dts4210NetInfoPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4210NetInfoPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with network interface info" REFERENCE "OFS_NWINFO1_STATUS, 1, 16, 2, 25, {{896,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}, {20,VARTYPE_STRING}, {64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING}, {64,VARTYPE_STRING},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER}, {64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4210NetworkInfo 20} dts4210NetInfoPortEntry OBJECT-TYPE SYNTAX Dts4210NetInfoPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4210NetInfoPortIndex } ::= { dts4210NetInfoPortTable 1 } Dts4210NetInfoPortEntry ::= SEQUENCE { dts4210NetInfoPortIndex Integer32, dts4210NetInfoPortStatus Unsigned32, dts4210NetInfoPortLink Unsigned32, dts4210NetInfoPortMAC DisplayString, dts4210NetInfoPortIP1v4 DTSNetworkName, dts4210NetInfoPortSubnet1v4 DTSNetworkName, dts4210NetInfoPortGW1v4 DTSNetworkName, dts4210NetInfoPortIP2v4 DTSNetworkName, dts4210NetInfoPortSubnet2v4 DTSNetworkName, dts4210NetInfoPortGW2v4 DTSNetworkName, dts4210NetInfoPortDNSv4 DTSNetworkName, dts4210NetInfoPortHostname DisplayString, dts4210NetInfoPortDomain DisplayString, dts4210NetInfoPortDHCPMode EnabledDisabled, dts4210NetInfoPortIPv6linklocal DTSNetworkName, dts4210NetInfoPortIP1v6 DTSNetworkName, dts4210NetInfoPortIP2v6 DTSNetworkName, dts4210NetInfoPortIPGWv6 DTSNetworkName, dts4210NetInfoPortVLANid1 Integer32, dts4210NetInfoPortVLANPCP1 Integer32, dts4210NetInfoPortVLANid2 Integer32, dts4210NetInfoPortVLANPCP2 Integer32, dts4210NetInfoPortLAGStatus Unsigned32, dts4210NetInfoPortPTPConfig Integer32, dts4210NetInfoPortSyncE EnabledDisabled } dts4210NetInfoPortIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the network port configuration entry (only virtual). Valid index = 1 .. 16" ::= { dts4210NetInfoPortEntry 1 } dts4210NetInfoPortStatus OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port status. 0: down 1: up" ::= { dts4210NetInfoPortEntry 2 } dts4210NetInfoPortLink OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet link mode Bit 0 - 1: speed 0: Unknown 1: 10Mbit 2: 100Mbit 3: 1000Mbit Bit5: 1 = full duplex, 0 = half duplex Bit6: 1 = Link ok, 0 = Link not OK Bit7: auto negotiation enabled Example: Value = 227 --> Auto neg. enabled, link ok, 1000Mbit/full" ::= { dts4210NetInfoPortEntry 3 } dts4210NetInfoPortMAC OBJECT-TYPE SYNTAX DisplayString (SIZE(19)) MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address (xx:xx:xx:xx:xx:xx)" ::= { dts4210NetInfoPortEntry 4 } dts4210NetInfoPortIP1v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx)" ::= { dts4210NetInfoPortEntry 5 } dts4210NetInfoPortSubnet1v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 subnet mask (xxx.xxx.xxx.xxx)" ::= { dts4210NetInfoPortEntry 6 } dts4210NetInfoPortGW1v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) of the gateway" ::= { dts4210NetInfoPortEntry 7 } dts4210NetInfoPortIP2v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx)" ::= { dts4210NetInfoPortEntry 8 } dts4210NetInfoPortSubnet2v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 subnet mask (xxx.xxx.xxx.xxx)" ::= { dts4210NetInfoPortEntry 9 } dts4210NetInfoPortGW2v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) of the gateway" ::= { dts4210NetInfoPortEntry 10} dts4210NetInfoPortDNSv4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) of the nameserver" ::= { dts4210NetInfoPortEntry 11 } dts4210NetInfoPortHostname OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Hostname of the DTS." ::= { dts4210NetInfoPortEntry 12 } dts4210NetInfoPortDomain OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Domain name of the DTS." ::= { dts4210NetInfoPortEntry 13 } dts4210NetInfoPortDHCPMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION "DHCP mode. 0: DHCP disabled 1: DHCP enabled" ::= { dts4210NetInfoPortEntry 14 } dts4210NetInfoPortIPv6linklocal OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IP V6 link local network address (xxxx:xxxx::xxxx)" ::= { dts4210NetInfoPortEntry 15 } dts4210NetInfoPortIP1v6 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IP V6 network address 1 (xxxx:xxxx::xxxx)" ::= { dts4210NetInfoPortEntry 16 } dts4210NetInfoPortIP2v6 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IP V6 network address 2 (xxxx:xxxx::xxxx)" ::= { dts4210NetInfoPortEntry 17 } dts4210NetInfoPortIPGWv6 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IP V6 gateway address (xxxx:xxxx::xxxx)" ::= { dts4210NetInfoPortEntry 18 } dts4210NetInfoPortVLANid1 OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN-ID." ::= { dts4210NetInfoPortEntry 19 } dts4210NetInfoPortVLANPCP1 OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN-PCP QoS." ::= { dts4210NetInfoPortEntry 20 } dts4210NetInfoPortVLANid2 OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN-ID." ::= { dts4210NetInfoPortEntry 21 } dts4210NetInfoPortVLANPCP2 OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN-PCP QoS." ::= { dts4210NetInfoPortEntry 22 } dts4210NetInfoPortLAGStatus OBJECT-TYPE SYNTAX Unsigned32 (0..1|255) MAX-ACCESS read-only STATUS current DESCRIPTION "LAG (Link-Aggregation) status. 0: LAG disabled 1: LAG enabled 255: LAG not supported" ::= { dts4210NetInfoPortEntry 23 } dts4210NetInfoPortPTPConfig OBJECT-TYPE SYNTAX Integer32 (0..12) MAX-ACCESS read-only STATUS current DESCRIPTION "Selected PTP configuration entry. 0 : PTP disable 1 .. 12 : PTP configuration entry" ::= { dts4210NetInfoPortEntry 24 } dts4210NetInfoPortSyncE OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION "SyncE mode. 0: SyncE disabled 1: SyncE enabled" ::= { dts4210NetInfoPortEntry 25 } -- ----------------------------------------------------------------- -- -- System - Network information - LAG IF -- ----------------------------------------------------------------- -- dts4210NetInfoLAGIfTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4210NetInfoLAGIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with network interface link aggregation info" REFERENCE "OFS_NWINFOLAG1_STATUS, 1, 4, 2, 17, {{84,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{20,VARTYPE_STRING},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4210NetworkInfo 30} dts4210NetInfoLAGIfEntry OBJECT-TYPE SYNTAX Dts4210NetInfoLAGIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4210NetInfoLAGIfIndex } ::= { dts4210NetInfoLAGIfTable 1 } Dts4210NetInfoLAGIfEntry ::= SEQUENCE { dts4210NetInfoLAGIfIndex Integer32, dts4210NetInfoLAGIfStatus Unsigned32, dts4210NetInfoLAGIfPollIntervall Integer32, dts4210NetInfoLAGIfLACPRate Unsigned32, dts4210NetInfoLAGIfMinLinks Integer32, dts4210NetInfoLAGIfAggregatorID Integer32, dts4210NetInfoLAGIfAggregatorNrActivePorts Integer32, dts4210NetInfoLAGIfAggregatorActorKey Integer32, dts4210NetInfoLAGIfPartnerMACAddress DisplayString, dts4210NetInfoLAGIfSlave1Status Unsigned32, dts4210NetInfoLAGIfSlave1LinkSpeed Integer32, dts4210NetInfoLAGIfSlave1LinkDuplex Unsigned32, dts4210NetInfoLAGIfSlave1LinkFailureCount Integer32, dts4210NetInfoLAGIfSlave2Status Unsigned32, dts4210NetInfoLAGIfSlave2LinkSpeed Integer32, dts4210NetInfoLAGIfSlave2LinkDuplex Unsigned32, dts4210NetInfoLAGIfSlave2LinkFailureCount Integer32 } dts4210NetInfoLAGIfIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the network port configuration entry (only virtual). Valid index = 1 .. 4" ::= { dts4210NetInfoLAGIfEntry 1 } dts4210NetInfoLAGIfStatus OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port status. 0: down 1: up" ::= { dts4210NetInfoLAGIfEntry 2 } dts4210NetInfoLAGIfPollIntervall OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Poll intervall monitoring the state." ::= { dts4210NetInfoLAGIfEntry 3 } dts4210NetInfoLAGIfLACPRate OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port status. 0: slow 1: fast" ::= { dts4210NetInfoLAGIfEntry 4 } dts4210NetInfoLAGIfMinLinks OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum active slave links required to bring the LAG link up." ::= { dts4210NetInfoLAGIfEntry 5 } dts4210NetInfoLAGIfAggregatorID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Aggregator ID." ::= { dts4210NetInfoLAGIfEntry 6 } dts4210NetInfoLAGIfAggregatorNrActivePorts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of activ network ports." ::= { dts4210NetInfoLAGIfEntry 7 } dts4210NetInfoLAGIfAggregatorActorKey OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Internal used Actor Key." ::= { dts4210NetInfoLAGIfEntry 8 } dts4210NetInfoLAGIfPartnerMACAddress OBJECT-TYPE SYNTAX DisplayString (SIZE(19)) MAX-ACCESS read-only STATUS current DESCRIPTION "Partner MAC address (xx:xx:xx:xx:xx:xx)" ::= { dts4210NetInfoLAGIfEntry 9 } dts4210NetInfoLAGIfSlave1Status OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port status. 0: down 1: up" ::= { dts4210NetInfoLAGIfEntry 10 } dts4210NetInfoLAGIfSlave1LinkSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Link speed." ::= { dts4210NetInfoLAGIfEntry 11 } dts4210NetInfoLAGIfSlave1LinkDuplex OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port duplex mode. 0: half duplex 1: full duplex" ::= { dts4210NetInfoLAGIfEntry 12 } dts4210NetInfoLAGIfSlave1LinkFailureCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Link Failure count." ::= { dts4210NetInfoLAGIfEntry 13 } dts4210NetInfoLAGIfSlave2Status OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port status. 0: down 1: up" ::= { dts4210NetInfoLAGIfEntry 14 } dts4210NetInfoLAGIfSlave2LinkSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Link speed." ::= { dts4210NetInfoLAGIfEntry 15 } dts4210NetInfoLAGIfSlave2LinkDuplex OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port duplex mode. 0: half duplex 1: full duplex" ::= { dts4210NetInfoLAGIfEntry 16 } dts4210NetInfoLAGIfSlave2LinkFailureCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Link Failure count." ::= { dts4210NetInfoLAGIfEntry 17 } -- ----------------------------------------------------------------- -- -- System - Time information -- ----------------------------------------------------------------- -- dts4210SystemTimeInfo OBJECT IDENTIFIER ::= { dts4210System 30 } dts4210TimeInfoGeneral OBJECT IDENTIFIER ::= { dts4210SystemTimeInfo 1 } dts4210TimeInfoStratum OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "DTS Stratum level (1-16). The Stratum level is the quality of the time synchronisation. Stratum: 1 = best quality Stratum 16 = not synchronized" REFERENCE "OFS_TINFO_STRATUM, 1, VARTYPE_BYTE" ::= { dts4210TimeInfoGeneral 1 } dts4210TimeInfoLastDrift OBJECT-TYPE SYNTAX Integer32 UNITS "micro seconds (us)" MAX-ACCESS read-only STATUS current DESCRIPTION "The last time drift." REFERENCE "OFS_TINFO_LASTDRIFT, 4, VARTYPE_INTEGER" ::= { dts4210TimeInfoGeneral 2 } dts4210TimeInfoLastQCorr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "When last quartz correction occured." REFERENCE "OFS_TINFO_LASTQCORR, 4, VARTYPE_DWORD" ::= { dts4210TimeInfoGeneral 3 } dts4210TimeInfoTimeSource OBJECT-TYPE SYNTAX INTEGER { none (0), gnss (1), redundantlink (2), ptp (3), gnssdcf(4), e1(5), frequencyin(6), manual (10), oscillator (99) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current active time source: 0: none 1: GNSS 2: Redundant Link 3: PTP 4: GNSS-DCF 5: E1 6: Frequency-In (F-In) 10: Manual 99: OSCILLATOR" REFERENCE "OFS_TINFO_SOURCETYPE, 1, VARTYPE_BYTE" ::= { dts4210TimeInfoGeneral 4 } dts4210TimeInfoSourceQuality OBJECT-TYPE SYNTAX Integer32 UNITS "Percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Time information reception quality of the selected source. Range: 0 .. 100%" REFERENCE "OFS_TINFO_SQUALI, 1, VARTYPE_BYTE" ::= { dts4210TimeInfoGeneral 5 } dts4210TimeInfoSourceOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "The current time source offset in nano seconds. The value is limited to -1800000000 ... 1800000000. If the offset is outside the limit, the variable will be set to the maximum positiv (2147483627) or negativ (-2147483628) value." REFERENCE "OFS_TINFO_SOFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4210TimeInfoGeneral 6 } dts4210TimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last time information from active source" REFERENCE "OFS_TINFOV2_LASTINFO, 4, VARTYPE_DWORD" ::= { dts4210TimeInfoGeneral 7 } dts4210TimeInfoSourceJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Jitter of the source" REFERENCE "OFS_TINFO_JITTER, 4, VARTYPE_DWORD" ::= { dts4210TimeInfoGeneral 8 } dts4210TimeInfoLeapSecStatus OBJECT-TYPE SYNTAX Gauge32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current Leap Second status. 0: No Leap Second detected 1: Leap Second detected" REFERENCE "OFS_TINFOV2_LEAP_SEC_DETECTED, 1, VARTYPE_BYTE" ::= { dts4210TimeInfoGeneral 30 } dts4210TimeInfoLeapSecDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the detected Leap Second. 0: No info >0: Timestamp " REFERENCE "OFS_TINFOV2_LEAP_SEC_TIMESTAMP, 4, VARTYPE_DWORD" ::= { dts4210TimeInfoGeneral 31 } dts4210TimeInfoLeapSecDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the detected Leap Second. -1: Remove 1 second 0: No info 1: Add 1 second" REFERENCE "OFS_TINFOV2_LEAP_SEC_DIRECTION, 1, VARTYPE_BYTE" ::= { dts4210TimeInfoGeneral 32 } dts4210TimeInfoLeapSecSource OBJECT-TYPE SYNTAX INTEGER { none (0), gnss (1), redundantlink (2), ptp (3), gnssdcf (4), manual (10) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current active time source: 0: none 1: GNSS 2: Redundant Link 3: PTP 4: GNSS-DCF 10: Manual" REFERENCE "OFS_TINFOV2_LEAP_SEC_SOURCE, 1, VARTYPE_BYTE" ::= { dts4210TimeInfoGeneral 33 } dts4210TimeInfoLeapSecLastDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the last implemented Leap Second. 0: No info, no Leap Second implemented >0: Timestamp " REFERENCE "OFS_TINFOV2_LEAP_SEC_LAST, 4, VARTYPE_DWORD" ::= { dts4210TimeInfoGeneral 34 } dts4210TimeInfoLeapSecLastDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the last implemented Leap Second. This second (+/-1) has to be calculated to the OFS_TINFOV2_LEAP_SEC_LAST timestamp. -1: Remove 1 second to the timestamp 0: No info 1: Add 1 second to the timestamp " REFERENCE "OFS_TINFOV2_LEAP_SEC_LAST_DIR, 1, VARTYPE_BYTE" ::= { dts4210TimeInfoGeneral 35 } -- --------------------------------- -- -- TIME INFO - GNSS synchronization -- --------------------------------- -- dts4210GNSSTimeInfo OBJECT IDENTIFIER ::= { dts4210SystemTimeInfo 10 } dts4210GNSSTimeInfoGNSSState OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Overall state of the GNSS receiver. 0: GNSS invalid 1: GNSS OK, GNSS can be used as time source" REFERENCE "OFS_GNSSINFO_GNSS_STATE, 1, VARTYPE_BYTE" ::= { dts4210GNSSTimeInfo 1 } dts4210GNSSTimeInfoSVCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of used satellites for navigation. < 4 : Not enough satellites in view >= 4 : OK, enough satellites in view" REFERENCE "OFS_GNSSINFO_SV_USED, 1, VARTYPE_BYTE" ::= { dts4210GNSSTimeInfo 5 } dts4210GNSSTimeInfoTDOP OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "TDOP value for time as int (100 equals 1.00) > 2.00 : TDOP is not accurate < 2.00 : OK, TDOP value is accurate for valid time" REFERENCE "OFS_GNSSINFO_TDOP, 4, VARTYPE_INTEGER" ::= { dts4210GNSSTimeInfo 6 } dts4210GNSSTimeInfoInternalAccuracy OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Internal receiver time accuracy (ns) > 100 : Internal accuracy bad < 100 : OK, internal accuracy is valid" REFERENCE "OFS_GNSSINFO_TACC, 4, VARTYPE_INTEGER" ::= { dts4210GNSSTimeInfo 7 } dts4210GNSSTimeInfoFixType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "GNSS fix Type, time application requires 3D-fix: 0: no fix 1: dead reckoning only 2: 2D-fix 3: 3D-fix 4: GNSS + dead reckoning combined 5: time only fix" REFERENCE "OFS_GNSSINFO_FIXE_TYPE, 1, VARTYPE_INTEGER" ::= { dts4210GNSSTimeInfo 8 } dts4210GNSSTimeInfoValidity OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the redundant operation. 0: Time invalid 1: Time OK" REFERENCE "OFS_GNSSINFO_VALIDITY_TIME, 1, VARTYPE_BYTE" ::= { dts4210GNSSTimeInfo 9 } dts4210GNSSTimeInfoSurveyInMode OBJECT-TYPE SYNTAX INTEGER { disableFixedPosition (0), fixedPosition (1), manualPosition (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Survey mode for position 0: Disabled, no Fixed Position 1: Fixed Position 2: Manual position" REFERENCE "OFS_GNSSINFO_SURVEYIN_MODE, 1, VARTYPE_BYTE" ::= { dts4210GNSSTimeInfo 10 } dts4210GNSSTimeInfoSurveyInStatus OBJECT-TYPE SYNTAX INTEGER { off(0), inprogress(1), complete (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Survey status for position 0: Disabled, no Fixed Position 1: Survey-in in-progress 2: Survey-in complete" REFERENCE "OFS_GNSSINFO_SURVEY_PROGRESS, 1, VARTYPE_BYTE" ::= { dts4210GNSSTimeInfo 11 } dts4210GNSSTimeInfoPositionLatitude OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Position latitude value as long (10000000 equals 1.00)" REFERENCE "OFS_GNSSINFO_LATITUDE, 4, VARTYPE_DWORD" ::= { dts4210GNSSTimeInfo 12 } dts4210GNSSTimeInfoPositionLongitude OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Position longitude value long (10000000 equals 1.00)" REFERENCE "OFS_GNSSINFO_LONGITUDE, 4, VARTYPE_DWORD" ::= { dts4210GNSSTimeInfo 13 } dts4210GNSSTimeInfoPositionHeightAboveSea OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Height above sea as long (1000 equals 1.00)" REFERENCE "OFS_GNSSINFO_HEIGHTABOVESEA, 4, VARTYPE_DWORD" ::= { dts4210GNSSTimeInfo 14 } dts4210GNSSTimeInfoAntennaDelay OBJECT-TYPE SYNTAX Unsigned32 (0..1000) UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Antenna cable delay in nano seconds" REFERENCE "OFS_GNSS_ANTENNA_DELAY, 4, VARTYPE_DWORD" ::= { dts4210GNSSTimeInfo 20 } dts4210GNSSTimeInfoLeapSecStatus OBJECT-TYPE SYNTAX Gauge32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current Leap Second status. 0: No Leap Second detected 1: Leap Second detected" REFERENCE "OFS_TINFOV2_GNSS_LEAP_SEC_DETECTED, 1, VARTYPE_BYTE" ::= { dts4210GNSSTimeInfo 30 } dts4210GNSSTimeInfoLeapSecDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the detected Leap Second. 0: No info >0: Timestamp " REFERENCE "OFS_TINFOV2_GNSS_LEAP_SEC_TIMESTAMP, 4, VARTYPE_DWORD" ::= { dts4210GNSSTimeInfo 31 } dts4210GNSSTimeInfoLeapSecDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the detected Leap Second. -1: Remove 1 second 0: No info 1: Add 1 second" REFERENCE "OFS_TINFOV2_GNSS_LEAP_SEC_DIRECTION, 1, VARTYPE_BYTE" ::= { dts4210GNSSTimeInfo 32 } dts4210GNSSTimeInfoJammingState OBJECT-TYPE SYNTAX INTEGER { unkonwn(0), ok(1), warning(2), critical(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Jamming/Interference status monitor 0: Unknown / disabled 1: OK - No significant jamming 2: Warning - interference visible but fix OK 3: Critical - interference visible and no fix" REFERENCE "OFS_GNSSINFO_JAMMING_STATUS, 1, VARTYPE_BYTE" ::= { dts4210GNSSTimeInfo 40 } dts4210GNSSTimeInfoJammingIndicator OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "CW Jamming indicator. 0: no CW jamming 255: strong CW jamming" REFERENCE "OFS_GNSSINFO_JAMMING_INDICATOR, 1, VARTYPE_BYTE" ::= { dts4210GNSSTimeInfo 41 } dts4210GNSSTimeInfoAGCMonitor OBJECT-TYPE SYNTAX Integer32(0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "AGC (Automatic Gain Control) Monitor" REFERENCE "OFS_GNSSINFO_AGC_MON, 2, VARTYPE_WORD" ::= { dts4210GNSSTimeInfo 42 } dts4210GNSSTimeInfoNoisePerMS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Noise Level as measured by the GPS Core" REFERENCE "OFS_GNSSINFO_NOISE_LEVEL, 2, VARTYPE_WORD" ::= { dts4210GNSSTimeInfo 43 } dts4210GNSSTimeInfoConfigured OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source configuration status. 0: Not configured 1: Configured" REFERENCE "OFS_TINFOV2_GNSS_CONFIGURED, 1, VARTYPE_BYTE" ::= { dts4210GNSSTimeInfo 60 } dts4210GNSSTimeInfoPriority OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Source priority configuration" REFERENCE "OFS_TINFOV2_GNSS_PRIORITY, 1, VARTYPE_BYTE" ::= { dts4210GNSSTimeInfo 61 } dts4210GNSSTimeInfoState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source locked status. Bit 0: Timesource reachable status Bit 1: Timesource Locked status" REFERENCE "OFS_TINFOV2_GNSS_TS_STATE, 4, VARTYPE_INTEGER" ::= { dts4210GNSSTimeInfo 62 } dts4210GNSSTimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last synchronisation time" REFERENCE "OFS_TINFOV2_GNSS_LASTTIME, 4, VARTYPE_DWORD" ::= { dts4210GNSSTimeInfo 63 } dts4210GNSSTimeInfoOffsetSec OBJECT-TYPE SYNTAX Integer32 UNITS "seconds (s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset seconds" REFERENCE "OFS_TINFOV2_GNSS_OFFSET_S, 4, VARTYPE_DWORD" ::= { dts4210GNSSTimeInfo 64 } dts4210GNSSTimeInfoOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset nano seconds" REFERENCE "OFS_TINFOV2_GNSS_OFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4210GNSSTimeInfo 65 } dts4210GNSSTimeInfoDeviation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calculated deviation in ppb." REFERENCE "OFS_TINFOV2_GNSS_DEVIATION, 4, VARTYPE_INTEGER" ::= { dts4210GNSSTimeInfo 66 } dts4210GNSSTimeInfoRating OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal calculated rating. Equivalent to priority." REFERENCE "OFS_TINFOV2_GNSS_RATING, 1, VARTYPE_BYTE" ::= { dts4210GNSSTimeInfo 67 } -- --------------------------------- -- -- Redundant Link operation -- --------------------------------- -- dts4210RedLinkTimeInfo OBJECT IDENTIFIER ::= { dts4210SystemTimeInfo 20 } dts4210RedLinkTimeInfoLinkState OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the redundant operation. 0: Not defined 1: Master role 2: Slave role" REFERENCE "OFS_TINFOV2_REDUNDANT_STATE, 1, VARTYPE_BYTE" ::= { dts4210RedLinkTimeInfo 1 } dts4210RedLinkTimeInfoLeapSecStatus OBJECT-TYPE SYNTAX Gauge32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current Leap Second status. 0: No Leap Second detected 1: Leap Second detected" REFERENCE "OFS_TINFOV2_REDUNDANT_LEAP_SEC_DETECTED, 1, VARTYPE_BYTE" ::= { dts4210RedLinkTimeInfo 30 } dts4210RedLinkTimeInfoLeapSecDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the detected Leap Second. 0: No info >0: Timestamp " REFERENCE "OFS_TINFOV2_REDUNDANT_LEAP_SEC_TIMESTAMP, 4, VARTYPE_DWORD" ::= { dts4210RedLinkTimeInfo 31 } dts4210RedLinkTimeInfoLeapSecDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the detected Leap Second. -1: Remove 1 second 0: No info 1: Add 1 second" REFERENCE "OFS_TINFOV2_REDUNDANT_LEAP_SEC_DIRECTION, 1, VARTYPE_BYTE" ::= { dts4210RedLinkTimeInfo 32 } dts4210RedLinkTimeInfoConfigured OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source configuration status. 0: Not configured 1: Configured" REFERENCE "OFS_TINFOV2_REDUNDANT_CONFIGURED, 1, VARTYPE_BYTE" ::= { dts4210RedLinkTimeInfo 60 } dts4210RedLinkTimeInfoPriority OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Source priority configuration" REFERENCE "OFS_TINFOV2_REDUNDANT_PRIORITY, 1, VARTYPE_BYTE" ::= { dts4210RedLinkTimeInfo 61 } dts4210RedLinkTimeInfoState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source locked status. Bit 0: Timesource reachable status Bit 1: Timesource Locked status" REFERENCE "OFS_TINFOV2_REDUNDANT_TS_STATE, 4, VARTYPE_INTEGER" ::= { dts4210RedLinkTimeInfo 62 } dts4210RedLinkTimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Redundant link synchronisation time (Last time received from Master as Slave)." REFERENCE "OFS_TINFOV2_REDUNDANT_LASTTIME, 4, VARTYPE_DWORD" ::= { dts4210RedLinkTimeInfo 63 } dts4210RedLinkTimeInfoOffsetSec OBJECT-TYPE SYNTAX Integer32 UNITS "seconds (s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Last measured offset to Master as Slave seconds" REFERENCE "OFS_TINFOV2_REDUNDANT_OFFSET_S, 4, VARTYPE_DWORD" ::= { dts4210RedLinkTimeInfo 64 } dts4210RedLinkTimeInfoOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Last measured offset to Master as Slave nano seconds" REFERENCE "OFS_TINFOV2_REDUNDANT_OFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4210RedLinkTimeInfo 65 } dts4210RedLinkTimeInfoDeviation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calculated deviation in ppb." REFERENCE "OFS_TINFOV2_REDUNDANT_DEVIATION, 4, VARTYPE_INTEGER" ::= { dts4210RedLinkTimeInfo 66 } dts4210RedLinkTimeInfoRating OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal calculated rating. Equivalent to priority." REFERENCE "OFS_TINFOV2_REDUNDANT_RATING, 1, VARTYPE_BYTE" ::= { dts4210RedLinkTimeInfo 67 } -- --------------------------------- -- -- TIME INFO - PTP synchronization -- --------------------------------- -- dts4210PTPTimeInfo OBJECT IDENTIFIER ::= { dts4210SystemTimeInfo 30 } dts4210PTPTimeInfoLeapSecStatus OBJECT-TYPE SYNTAX Gauge32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current Leap Second status. 0: No Leap Second detected 1: Leap Second detected" REFERENCE "OFS_TINFOV2_PTP_LEAP_SEC_DETECTED, 1, VARTYPE_BYTE" ::= { dts4210PTPTimeInfo 30 } dts4210PTPTimeInfoLeapSecDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the detected Leap Second. 0: No info >0: Timestamp " REFERENCE "OFS_TINFOV2_PTP_LEAP_SEC_TIMESTAMP, 4, VARTYPE_DWORD" ::= { dts4210PTPTimeInfo 31 } dts4210PTPTimeInfoLeapSecDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the detected Leap Second. -1: Remove 1 second 0: No info 1: Add 1 second" REFERENCE "OFS_TINFOV2_PTP_LEAP_SEC_DIRECTION, 1, VARTYPE_BYTE" ::= { dts4210PTPTimeInfo 32 } dts4210PTPTimeInfoConfigured OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source configuration status. 0: Not configured 1: Configured" REFERENCE "OFS_TINFOV2_PTP_CONFIGURED, 1, VARTYPE_BYTE" ::= { dts4210PTPTimeInfo 60 } dts4210PTPTimeInfoPriority OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Source priority configuration" REFERENCE "OFS_TINFOV2_PTP_PRIORITY, 1, VARTYPE_BYTE" ::= { dts4210PTPTimeInfo 61 } dts4210PTPTimeInfoState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source locked status. Bit 0: Timesource reachable status Bit 1: Timesource Locked status" REFERENCE "OFS_TINFOV2_PTP_TS_STATE, 4, VARTYPE_INTEGER" ::= { dts4210PTPTimeInfo 62 } dts4210PTPTimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last synchronisation time" REFERENCE "OFS_TINFOV2_PTP_LASTTIME, 4, VARTYPE_DWORD" ::= { dts4210PTPTimeInfo 63 } dts4210PTPTimeInfoOffsetSec OBJECT-TYPE SYNTAX Integer32 UNITS "seconds (s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset seconds" REFERENCE "OFS_TINFOV2_PTP_OFFSET_S, 4, VARTYPE_DWORD" ::= { dts4210PTPTimeInfo 64 } dts4210PTPTimeInfoOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset nano seconds" REFERENCE "OFS_TINFOV2_PTP_OFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4210PTPTimeInfo 65 } dts4210PTPTimeInfoDeviation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calculated deviation in ppb." REFERENCE "OFS_TINFOV2_PTP_DEVIATION, 4, VARTYPE_INTEGER" ::= { dts4210PTPTimeInfo 66 } dts4210PTPTimeInfoRating OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal calculated rating. Equivalent to priority." REFERENCE "OFS_TINFOV2_PTP_RATING, 1, VARTYPE_BYTE" ::= { dts4210PTPTimeInfo 67 } -- --------------------------------- -- -- TIME INFO - GNSS-DCF synchronization -- --------------------------------- -- dts4210DCFTimeInfo OBJECT IDENTIFIER ::= { dts4210SystemTimeInfo 40 } dts4210DCFTimeInfoSatNbr OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of satellites in view (only GPS 4500)" REFERENCE "OFS_TINFO_DCF_SAT_NBR, 1, VARTYPE_BYTE" ::= { dts4210DCFTimeInfo 4 } dts4210DCFTimeInfoSecCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter of DCF pulses (usually 0..58)" REFERENCE "OFS_TINFO_DCF_SECCNT, 4, VARTYPE_DWORD" ::= { dts4210DCFTimeInfo 5 } dts4210DCFTimeInfoLeapSecStatus OBJECT-TYPE SYNTAX Gauge32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current Leap Second status. 0: No Leap Second detected 1: Leap Second detected" REFERENCE "OFS_TINFOV2_DCF_LEAP_SEC_DETECTED, 1, VARTYPE_BYTE" ::= { dts4210DCFTimeInfo 30 } dts4210DCFTimeInfoLeapSecDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the detected Leap Second. 0: No info >0: Timestamp " REFERENCE "OFS_TINFOV2_DCF_LEAP_SEC_TIMESTAMP, 4, VARTYPE_DWORD" ::= { dts4210DCFTimeInfo 31 } dts4210DCFTimeInfoLeapSecDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the detected Leap Second. -1: Remove 1 second 0: No info 1: Add 1 second" REFERENCE "OFS_TINFOV2_DCF_LEAP_SEC_DIRECTION, 1, VARTYPE_BYTE" ::= { dts4210DCFTimeInfo 32 } dts4210DCFTimeInfoConfigured OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source configuration status. 0: Not configured 1: Configured" REFERENCE "OFS_TINFOV2_DCF_CONFIGURED, 1, VARTYPE_BYTE" ::= { dts4210DCFTimeInfo 60 } dts4210DCFTimeInfoPriority OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Source priority configuration" REFERENCE "OFS_TINFOV2_DCF_PRIORITY, 1, VARTYPE_BYTE" ::= { dts4210DCFTimeInfo 61 } dts4210DCFTimeInfoState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source locked status. Bit 0: Timesource reachable status Bit 1: Timesource Locked status" REFERENCE "OFS_TINFOV2_DCF_TS_STATE, 4, VARTYPE_INTEGER" ::= { dts4210DCFTimeInfo 62 } dts4210DCFTimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last synchronisation time" REFERENCE "OFS_TINFOV2_DCF_LASTTIME, 4, VARTYPE_DWORD" ::= { dts4210DCFTimeInfo 63 } dts4210DCFTimeInfoOffsetSec OBJECT-TYPE SYNTAX Integer32 UNITS "seconds (s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset seconds" REFERENCE "OFS_TINFOV2_DCF_OFFSET_S, 4, VARTYPE_DWORD" ::= { dts4210DCFTimeInfo 64 } dts4210DCFTimeInfoOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset nano seconds" REFERENCE "OFS_TINFOV2_DCF_OFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4210DCFTimeInfo 65 } dts4210DCFTimeInfoDeviation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calculated deviation in ppb." REFERENCE "OFS_TINFOV2_DCF_DEVIATION, 4, VARTYPE_INTEGER" ::= { dts4210DCFTimeInfo 66 } dts4210DCFTimeInfoRating OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal calculated rating. Equivalent to priority." REFERENCE "OFS_TINFOV2_DCF_RATING, 1, VARTYPE_BYTE" ::= { dts4210DCFTimeInfo 67 } -- --------------------------------- -- -- TIME INFO - E1 synchronization -- --------------------------------- -- dts4210E1TimeInfo OBJECT IDENTIFIER ::= { dts4210SystemTimeInfo 50 } dts4210E1TimeInfoQualityLevel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "E1 Quality level I - III" REFERENCE "OFS_TINFOV2_E1_TS_QL, 1, VARTYPE_BYTE" ::= { dts4210E1TimeInfo 1 } dts4210E1TimeInfoConfigured OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source configuration status. 0: Not configured 1: Configured" REFERENCE "OFS_TINFOV2_E1_CONFIGURED, 1, VARTYPE_BYTE" ::= { dts4210E1TimeInfo 60 } dts4210E1TimeInfoPriority OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Source priority configuration" REFERENCE "OFS_TINFOV2_E1_PRIORITY, 1, VARTYPE_BYTE" ::= { dts4210E1TimeInfo 61 } dts4210E1TimeInfoState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source locked status. Bit 0: Timesource reachable status Bit 1: Timesource Locked status" REFERENCE "OFS_TINFOV2_E1_TS_STATE, 4, VARTYPE_INTEGER" ::= { dts4210E1TimeInfo 62 } dts4210E1TimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last synchronisation time" REFERENCE "OFS_TINFOV2_E1_LASTTIME, 4, VARTYPE_DWORD" ::= { dts4210E1TimeInfo 63 } dts4210E1TimeInfoOffsetSec OBJECT-TYPE SYNTAX Integer32 UNITS "seconds (s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset seconds" REFERENCE "OFS_TINFOV2_E1_OFFSET_S, 4, VARTYPE_DWORD" ::= { dts4210E1TimeInfo 64 } dts4210E1TimeInfoOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset nano seconds" REFERENCE "OFS_TINFOV2_E1_OFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4210E1TimeInfo 65 } dts4210E1TimeInfoDeviation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calculated deviation in ppb." REFERENCE "OFS_TINFOV2_E1_DEVIATION, 4, VARTYPE_INTEGER" ::= { dts4210E1TimeInfo 66 } dts4210E1TimeInfoRating OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal calculated rating. Equivalent to priority." REFERENCE "OFS_TINFOV2_E1_RATING, 1, VARTYPE_BYTE" ::= { dts4210E1TimeInfo 67 } -- --------------------------------- -- -- TIME INFO - Frequency synchronization -- --------------------------------- -- dts4210FINTimeInfo OBJECT IDENTIFIER ::= { dts4210SystemTimeInfo 60 } dts4210FINTimeInfoConfigured OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source configuration status. 0: Not configured 1: Configured" REFERENCE "OFS_TINFOV2_F_IN_CONFIGURED, 1, VARTYPE_BYTE" ::= { dts4210FINTimeInfo 60 } dts4210FINTimeInfoPriority OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Source priority configuration" REFERENCE "OFS_TINFOV2_F_IN_PRIORITY, 1, VARTYPE_BYTE" ::= { dts4210FINTimeInfo 61 } dts4210FINTimeInfoState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source locked status. Bit 0: Timesource reachable status Bit 1: Timesource Locked status" REFERENCE "OFS_TINFOV2_F_IN_TS_STATE, 4, VARTYPE_INTEGER" ::= { dts4210FINTimeInfo 62 } dts4210FINTimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last synchronisation time" REFERENCE "OFS_TINFOV2_F_IN_LASTTIME, 4, VARTYPE_DWORD" ::= { dts4210FINTimeInfo 63 } dts4210FINTimeInfoOffsetSec OBJECT-TYPE SYNTAX Integer32 UNITS "seconds (s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset seconds" REFERENCE "OFS_TINFOV2_F_IN_OFFSET_S, 4, VARTYPE_DWORD" ::= { dts4210FINTimeInfo 64 } dts4210FINTimeInfoOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset nano seconds" REFERENCE "OFS_TINFOV2_F_IN_OFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4210FINTimeInfo 65 } dts4210FINTimeInfoDeviation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calculated deviation in ppb." REFERENCE "OFS_TINFOV2_F_IN_DEVIATION, 4, VARTYPE_INTEGER" ::= { dts4210FINTimeInfo 66 } dts4210FINTimeInfoRating OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal calculated rating. Equivalent to priority." REFERENCE "OFS_TINFOV2_F_IN_RATING, 1, VARTYPE_BYTE" ::= { dts4210FINTimeInfo 67 } -- --------------------------------- -- -- TIME INFO - NTP synchronization -- --------------------------------- -- dts4210NTPTimeInfo OBJECT IDENTIFIER ::= { dts4210SystemTimeInfo 80 } dts4210NTPTimeInfoCurrentSource OBJECT-TYPE SYNTAX OCTET STRING (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Current NTP time source (system peer)." REFERENCE "OFS_TINFO_NTP_SOURCE, 63, VARTYPE_STRING" ::= { dts4210NTPTimeInfo 1 } dts4210NTPTimeInfoSystemOffset OBJECT-TYPE SYNTAX Integer32 UNITS "micro seconds (us)" MAX-ACCESS read-only STATUS current DESCRIPTION "Current system time offset." REFERENCE "OFS_TINFO_NTP_OFFSET, 4, VARTYPE_DWORD" ::= { dts4210NTPTimeInfo 2 } dts4210NTPTimeInfoSourceJitter OBJECT-TYPE SYNTAX Integer32 UNITS "micro seconds (us)" MAX-ACCESS read-only STATUS current DESCRIPTION "Current time source jitter." REFERENCE "OFS_TINFO_NTP_JITTER, 4, VARTYPE_DWORD" ::= { dts4210NTPTimeInfo 3 } dts4210NTPTimeInfoStratum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Stratum of NTP" REFERENCE "OFS_TINFO_NTP_STRATUM, 1, VARTYPE_BYTE" ::= { dts4210NTPTimeInfo 4 } dts4210NTPTimeInfoFrequency OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frequency of NTP" REFERENCE "OFS_TINFO_NTP_FREQ, 4, VARTYPE_INTEGER" ::= { dts4210NTPTimeInfo 5 } dts4210NTPTInfoReachable OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current reach of NTP source (octal 0..377)" REFERENCE "OFS_TINFO_NTP_REACH, 1, VARTYPE_BYTE" ::= { dts4210NTPTimeInfo 6 } -- --------------------------------- -- -- TIME INFO - Oscillator: -- --------------------------------- -- dts4210OscTimeInfo OBJECT IDENTIFIER ::= { dts4210SystemTimeInfo 99 } dts4210OscTimeInfoPLLState OBJECT-TYPE SYNTAX INTEGER { unknown (0), initializing (1), synchronizing (2), regulating (3), holdingover (4), resynchronizing (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the PLL. 0 = UNKNOWN, 1 = INITIALIZING, 2 = SYNCHRONIZING, 3 = REGULATING, 4 = HOLDINGOVER, 5 = RESYNCHRONIZING" REFERENCE "OFS_OSCINFO_REGULATE_STATE, 1, VARTYPE_BYTE" ::= { dts4210OscTimeInfo 1 } dts4210OscTimeInfoPPSTrackingState OBJECT-TYPE SYNTAX INTEGER { none (0), poor (1), good (2), lost (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the 1pps tracking. 0 = None 1 = Poor 2 = Good 3 = Lost" REFERENCE "OFS_OSCINFO_PPS_TRACKING_STATE, 1, VARTYPE_BYTE" ::= { dts4210OscTimeInfo 2 } dts4210OscTimeInfoLockedState OBJECT-TYPE SYNTAX INTEGER { notlocked (0), locked (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the oscillator tracking. 0 = Not locked 1 = Locked" REFERENCE "OFS_OSCINFO_LOCK_STATE, 1, VARTYPE_BYTE" ::= { dts4210OscTimeInfo 3 } -- ----------------------------------------------------------------- -- -- System - Power -- ----------------------------------------------------------------- -- dts4210SystemPower OBJECT IDENTIFIER ::= { dts4210System 40 } dts4210SupplyVoltage1 OBJECT-TYPE SYNTAX Gauge32 (0..30000) UNITS "Milli volts (mV DC)" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured voltage of the power supply 1. The value is in milli volts (mV DC). Range 0 .. 30000 mV" REFERENCE "OFS_POWER_U1_MV, 4, VARTYPE_DWORD" ::= { dts4210SystemPower 1 } dts4210SupplyVoltage2 OBJECT-TYPE SYNTAX Gauge32 (0..30000) UNITS "Milli volts (mV DC)" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured voltage of the power supply 2. The value is in milli volts (mV DC). Range 0 .. 30000 mV" REFERENCE "OFS_POWER_U2_MV, 4, VARTYPE_DWORD" ::= { dts4210SystemPower 2 } -- ----------------------------------------------------------------- -- -- System - Maintenance -- ----------------------------------------------------------------- -- dts4210SystemMaintenance OBJECT IDENTIFIER ::= { dts4210System 50 } dts4210SysUpdateCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), runRamDirUpdateProcess (1), runUSBUpdateProcess(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "System software update command variable. After the update proccess the device will do a restart. 0: No action 1: Run /ram directory update proccess 2: Run USB update proccess" REFERENCE "OFS_SYSTEM_UPDATE, 1, VARTYPE_BYTE" ::= { dts4210SystemMaintenance 1 } dts4210SysBackupCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), runBackupProcess (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "System backup command variable. The current configuration files will be copied internal. 0: No action 1: Run local backup proccess" REFERENCE "OFS_SYSTEM_BACKUP, 1, VARTYPE_BYTE" ::= { dts4210SystemMaintenance 2 } dts4210SysRestoreCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), runRestoreProcess (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "System restore command variable. Restores previous created configuration files copies (by the local backup command). 0: No Action 1: Run local restore proccess" REFERENCE "OFS_SYSTEM_RESTORE, 1, VARTYPE_BYTE" ::= { dts4210SystemMaintenance 3 } dts4210SysRestartCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), reboot (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "System reboot command variable. 0: No action 1: Reboot" REFERENCE "OFS_SYSTEM_RESTART, 1, VARTYPE_BYTE" ::= { dts4210SystemMaintenance 4 } dts4210SysDefaultCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), runDefaltRestoreProcess (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "System restore command variable. Restores system to default. 0: No action 1: Run default restore proccess" REFERENCE "OFS_SYSTEM_DEFAULT, 1, VARTYPE_BYTE" ::= { dts4210SystemMaintenance 5 } dts4210SysAllChanged OBJECT-TYPE SYNTAX INTEGER { noAction (0), readAllConfigFiles (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reread all configuration files" REFERENCE "OFS_SYSTEM_ALL_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210SystemMaintenance 6 } dts4210SysCopyFiles OBJECT-TYPE SYNTAX INTEGER { noAction (0), copyFilesToFlash (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Copies all telegram files and switching program files from /ram and USB to the internal flash directory." REFERENCE "OFS_SYSTEM_CPY_FILES, 1, VARTYPE_BYTE" ::= { dts4210SystemMaintenance 7 } -- ----------------------------------------------------------------- -- -- System - Versions -- ----------------------------------------------------------------- -- dts4210SystemVersions OBJECT IDENTIFIER ::= { dts4210System 60 } dts4210verFPGA OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the FPGA firmware." REFERENCE "OFS_VER_FPGA, 0, VARTYPE_STRING" ::= { dts4210SystemVersions 1 } dts4210verFPGADriver OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the FPGA linux driver software." REFERENCE "OFS_VER_DTS_FPGA, 0, VARTYPE_STRING" ::= { dts4210SystemVersions 2 } dts4210verModule OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the linux time driver software." REFERENCE "OFS_VER_DTS_TIME, 59, VARTYPE_STRING" ::= { dts4210SystemVersions 3 } dts4210verLangResource OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the menu text resource file." REFERENCE "OFS_VER_LANGUAGE, 59, VARTYPE_STRING" ::= { dts4210SystemVersions 4 } dts4210verTimezoneTable OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the time zone tables." REFERENCE "OFS_VER_SEASON, 59, VARTYPE_STRING" ::= { dts4210SystemVersions 5 } dts4210verNTP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the NTP server." REFERENCE "OFS_VER_NTPD, 59, VARTYPE_STRING" ::= { dts4210SystemVersions 6 } dts4210verLinux OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the linux kernel." REFERENCE "OFS_VER_KERNEL, 59, VARTYPE_STRING" ::= { dts4210SystemVersions 7 } dts4210verCLIShell OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the command line shell." REFERENCE "OFS_VER_BUSYBOX, 59, VARTYPE_STRING" ::= { dts4210SystemVersions 8 } dts4210verRootFS OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the root file system." REFERENCE "OFS_VER_FILESYS, 59, VARTYPE_STRING" ::= { dts4210SystemVersions 9 } dts4210verSNMPMasterAgent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the SNMP master agent." REFERENCE "OFS_VER_SNMPMASTER, 59, VARTYPE_STRING" ::= { dts4210SystemVersions 10 } dts4210verSNMPSubAgent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the SNMP sub agent." REFERENCE "OFS_VER_SNMPSUBAGENT, 59, VARTYPE_STRING" ::= { dts4210SystemVersions 11 } dts4210verApplication OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the DTS application software." REFERENCE "OFS_VER_DTS4210, 59, VARTYPE_STRING" ::= { dts4210SystemVersions 12 } dts4210verPTP4L OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the ptp software." REFERENCE "OFS_VER_PTP4L, 59, VARTYPE_STRING" ::= { dts4210SystemVersions 13 } -- ----------------------------------------------------------------- -- -- System - Product information -- ----------------------------------------------------------------- -- dts4210ProdInfo OBJECT IDENTIFIER ::= { dts4210System 70 } dts4210ProdInfoHWCode OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "DTS device type code. 1.Byte = 4 (Hardware), 8 (Software) 2.Byte = x (device main group) 3.Byte = y (device function) 4.Byte = z (device variants) 5.-8.Byte = reserved DTS4210 -> 4.1.4.8 x=1,y=3,z=8" REFERENCE "OFS_PROD_HW_CODE, 8, VARTYPE_BYTEARR" ::= { dts4210ProdInfo 1 } dts4210ProdInfoHWName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..59)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the DTS device (type)." REFERENCE "OFS_PROD_HW_NAME, 59, VARTYPE_STRING" ::= { dts4210ProdInfo 2 } dts4210ProdInfoHWRevision OBJECT-TYPE SYNTAX DisplayString (SIZE(1..19)) MAX-ACCESS read-only STATUS current DESCRIPTION "Hardware revision of the DTS device." REFERENCE "OFS_PROD_HW_VER, 19, VARTYPE_STRING" ::= { dts4210ProdInfo 3 } dts4210ProdInfoProdNo OBJECT-TYPE SYNTAX DisplayString (SIZE(1..19)) MAX-ACCESS read-only STATUS current DESCRIPTION "Product number (serial number) of the DTS device." REFERENCE "OFS_PROD_PROD_NR, 20, VARTYPE_STRING" ::= { dts4210ProdInfo 4 } dts4210ProdInfoArticleNo OBJECT-TYPE SYNTAX DisplayString (SIZE(1..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Article number of the DTS device." REFERENCE "OFS_PROD_ART_NR, 8, VARTYPE_STRING" ::= { dts4210ProdInfo 5 } dts4210ProdInfoFirmwareVer OBJECT-TYPE SYNTAX DisplayString (SIZE(1..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "Firmware version of the DTS device." REFERENCE "OFS_PROD_FIRMW_VER, 40, VARTYPE_STRING" ::= { dts4210ProdInfo 6 } dts4210SysConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "System configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_GEN_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210System 100 } dts4210SysConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_GEN_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210System 101 } -- ----------------------------------------------------------------- -- -- Network -- ----------------------------------------------------------------- -- dts4210Network OBJECT IDENTIFIER ::= { dts4210MIB 2 } -- ----------------------------------------------------------------- -- -- Network - Network Ports -- ----------------------------------------------------------------- -- dts4210NetworkPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4210NetworkPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with network port configuration" REFERENCE "OFS_NW1_LINK, 1, 16, 2, 11, {{44,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4210Network 10} dts4210NetworkPortEntry OBJECT-TYPE SYNTAX Dts4210NetworkPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4210NetworkPortIndex } ::= { dts4210NetworkPortTable 1 } Dts4210NetworkPortEntry ::= SEQUENCE { dts4210NetworkPortIndex Integer32, dts4210NetworkPortLinkMode Unsigned32, dts4210NetworkPortPTPSupport EnabledDisabled, dts4210NetworkPortPTPConfig Integer32, dts4210NetworkPortLAGSupport EnabledDisabled, dts4210NetworkPortLAGConfig Integer32, dts4210NetworkPortSyncESupport EnabledDisabled, dts4210NetworkPortSyncEConfig Integer32, dts4210NetworkPortCfgChanged Unsigned32, dts4210NetworkPortConfigCmd INTEGER, dts4210NetworkPortConfigChangedTime TimeTicks } dts4210NetworkPortIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the network port configuration entry (only virtual). Valid index = 1 .. 16" ::= { dts4210NetworkPortEntry 1 } dts4210NetworkPortLinkMode OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Ethernet link mode Bit 0 - 1: speed 2: 100Mbit 3: 1000Mbit Bit5: 1 = full duplex, 0 = half duplex Bit7: 1 = auto negotiation enabled, 0 = disabled" ::= { dts4210NetworkPortEntry 2 } dts4210NetworkPortPTPSupport OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION " PTP Output support. 0: Port has no PTP support 1: Port supports PTP" ::= { dts4210NetworkPortEntry 3 } dts4210NetworkPortPTPConfig OBJECT-TYPE SYNTAX Integer32 (0..12) MAX-ACCESS read-write STATUS current DESCRIPTION "Index from the PTP configuration entry table. 0 : PTP disable 1 .. 12 : Index PTP configuration table entry" ::= { dts4210NetworkPortEntry 4 } dts4210NetworkPortLAGSupport OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION " LAG Output support. 0 : Port has no LAG support 1 : Port supports LAG" ::= { dts4210NetworkPortEntry 5 } dts4210NetworkPortLAGConfig OBJECT-TYPE SYNTAX Integer32 (0..4) MAX-ACCESS read-write STATUS current DESCRIPTION "Index from the LAG configuration entry table. 0: LAG disable 1 .. 4 : Index LAG configuration table entry" ::= { dts4210NetworkPortEntry 6 } dts4210NetworkPortSyncESupport OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION " SyncE ESMC Output support. 0 : Port has no SyncE ESMC support 1 : Port supports SyncE ESMC" ::= { dts4210NetworkPortEntry 7 } dts4210NetworkPortSyncEConfig OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration of ESMC output. 0: ESMC disable 1: ESMC enable" ::= { dts4210NetworkPortEntry 8 } dts4210NetworkPortCfgChanged OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Network port configuration changed variable. 0: No configuration change 1: Configuration has changed" ::= { dts4210NetworkPortEntry 9 } dts4210NetworkPortConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Network port configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" ::= { dts4210NetworkPortEntry 10 } dts4210NetworkPortConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." ::= { dts4210NetworkPortEntry 11 } -- ----------------------------------------------------------------- -- -- Network - LAG Interfaces -- ----------------------------------------------------------------- -- dts4210NetworkLAGIFTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4210NetworkLAGIFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with network link aggragation configuration" REFERENCE "OFS_NWLAG1_MODE, 1, 4, 2, 7, {{28,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4210Network 20} dts4210NetworkLAGIFEntry OBJECT-TYPE SYNTAX Dts4210NetworkLAGIFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4210NetworkLAGIFIndex } ::= { dts4210NetworkLAGIFTable 1 } Dts4210NetworkLAGIFEntry ::= SEQUENCE { dts4210NetworkLAGIFIndex Integer32, dts4210NetworkLAGIFMode Unsigned32, dts4210NetworkLAGIFLACPRate Unsigned32, dts4210NetworkLAGIFMiiMon Unsigned32, dts4210NetworkLAGIFCfgChanged Unsigned32, dts4210NetworkLAGIFConfigCmd INTEGER, dts4210NetworkLAGIFConfigChangedTime TimeTicks } dts4210NetworkLAGIFIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the LAG interface configuration entry (only virtual). Valid index = 1 .. 4" ::= { dts4210NetworkLAGIFEntry 1 } dts4210NetworkLAGIFMode OBJECT-TYPE SYNTAX Unsigned32 (0..6) MAX-ACCESS read-write STATUS current DESCRIPTION "Link Aggregation Mode. 0: balance-rr 1: active-backup 2: balance-xor 3: broadcast 4: 802.3ad 5: balance-tlb 6: balance-alb" ::= { dts4210NetworkLAGIFEntry 2 } dts4210NetworkLAGIFLACPRate OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Rate to transmit LACPDU packets in 802.3ad mode. 0: slow, transmit LACPDUs every 30 seconds. 1: fast, transmit LACPDUs every 1 second." ::= { dts4210NetworkLAGIFEntry 3 } dts4210NetworkLAGIFMiiMon OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "MII link monitoring frequency in milliseconds. 0: disable 1-255: monitoring frequency in milliseconds" ::= { dts4210NetworkLAGIFEntry 4 } dts4210NetworkLAGIFCfgChanged OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "LAG Network interface configuration changed variable. 0: No configuration change 1: Configuration has changed" ::= { dts4210NetworkLAGIFEntry 5 } dts4210NetworkLAGIFConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "LAG Network configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" ::= { dts4210NetworkLAGIFEntry 6 } dts4210NetworkLAGIFConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." ::= { dts4210NetworkLAGIFEntry 7 } -- ----------------------------------------------------------------- -- -- Network - Network IP Configuration -- ----------------------------------------------------------------- -- dts4210NetworkIPCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4210NetworkIPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with network interface configuration" REFERENCE "OFS_NW1_IP_MODE, 1, 16, 2, 34, {{1216,VARTYPE_STRUCTARR}, {4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING}, {4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING}, {4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}, {64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}, {64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER} , {4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4210Network 30} dts4210NetworkIPCfgEntry OBJECT-TYPE SYNTAX Dts4210NetworkIPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4210NetworkIPCfgIndex } ::= { dts4210NetworkIPCfgTable 1 } Dts4210NetworkIPCfgEntry ::= SEQUENCE { dts4210NetworkIPCfgIndex Integer32, dts4210NetworkIPCfgMode Unsigned32, dts4210NetworkIPCfgIP1v4 DTSNetworkName, dts4210NetworkIPCfgIPMask1v4 DTSNetworkName, dts4210NetworkIPCfgIPGateway1v4 DTSNetworkName, dts4210NetworkIPCfgIP2v4 DTSNetworkName, dts4210NetworkIPCfgIPMask2v4 DTSNetworkName, dts4210NetworkIPCfgIPGateway2v4 DTSNetworkName, dts4210NetworkIPCfgDHCPMode EnabledDisabled, dts4210NetworkIPCfgHostname DisplayString, dts4210NetworkIPCfgDomain DisplayString, dts4210NetworkIPCfgIPNameserver DTSNetworkName, dts4210NetworkIPCfgIPv6AutoConf EnabledDisabled, dts4210NetworkIPCfgIPv6DHCPMode EnabledDisabled, dts4210NetworkIPCfgIPv6Addr1 DTSNetworkName, dts4210NetworkIPCfgIPv6Prefix1 Unsigned32, dts4210NetworkIPCfgIPv6Gateway1 DTSNetworkName, dts4210NetworkIPCfgIPv6Addr2 DTSNetworkName, dts4210NetworkIPCfgIPv6Prefix2 Unsigned32, dts4210NetworkIPCfgIPv6Gateway2 DTSNetworkName, dts4210NetworkIPCfgIPv6Nameserver DTSNetworkName, dts4210NetworkIPCfgVLANMember1 Unsigned32, dts4210NetworkIPCfgVLANMember2 Unsigned32, dts4210NetworkIPCfgIP1v4RouteDest1 DTSNetworkName, dts4210NetworkIPCfgIP1v4RoutePrefix1 Unsigned32, dts4210NetworkIPCfgIP1v4RouteDest2 DTSNetworkName, dts4210NetworkIPCfgIP1v4RoutePrefix2 Unsigned32, dts4210NetworkIPCfgIP2v4RouteDest1 DTSNetworkName, dts4210NetworkIPCfgIP2v4RoutePrefix1 Unsigned32, dts4210NetworkIPCfgIP2v4RouteDest2 DTSNetworkName, dts4210NetworkIPCfgIP2v4RoutePrefix2 Unsigned32, dts4210NetworkIPCfgChanged Unsigned32, dts4210NetworkIPCfgConfigCmd INTEGER, dts4210NetworkIPCfgConfigChangedTime TimeTicks } dts4210NetworkIPCfgIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the network interface configuration entry (only virtual). Valid index = 1 .. 16" ::= { dts4210NetworkIPCfgEntry 1 } dts4210NetworkIPCfgMode OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Assigned network port / LAG interface. 0: no assignment. 1 .. 16: Network Port 65 .. 68: LAG Interface" ::= { dts4210NetworkIPCfgEntry 2 } dts4210NetworkIPCfgIP1v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx)" ::= { dts4210NetworkIPCfgEntry 3 } dts4210NetworkIPCfgIPMask1v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 subnet mask (xxx.xxx.xxx.xxx)" ::= { dts4210NetworkIPCfgEntry 4 } dts4210NetworkIPCfgIPGateway1v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) of the gateway" ::= { dts4210NetworkIPCfgEntry 5 } dts4210NetworkIPCfgIP2v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx)" ::= { dts4210NetworkIPCfgEntry 6 } dts4210NetworkIPCfgIPMask2v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 subnet mask (xxx.xxx.xxx.xxx)" ::= { dts4210NetworkIPCfgEntry 7 } dts4210NetworkIPCfgIPGateway2v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) of the gateway" ::= { dts4210NetworkIPCfgEntry 8 } dts4210NetworkIPCfgDHCPMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP mode. 0: DHCP disabled 1: DHCP enabled" ::= { dts4210NetworkIPCfgEntry 9 } dts4210NetworkIPCfgHostname OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Hostname of the DTS." ::= { dts4210NetworkIPCfgEntry 10 } dts4210NetworkIPCfgDomain OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Domain name of the DTS." ::= { dts4210NetworkIPCfgEntry 11 } dts4210NetworkIPCfgIPNameserver OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) of the nameserver" ::= { dts4210NetworkIPCfgEntry 12 } dts4210NetworkIPCfgIPv6AutoConf OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "Auto configuration mode IP V6. 0: Auto conf disabled 1: Auto conf enabled" ::= { dts4210NetworkIPCfgEntry 13 } dts4210NetworkIPCfgIPv6DHCPMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP mode IP V6. 0: DHCP disabled 1: DHCP enabled" ::= { dts4210NetworkIPCfgEntry 14 } dts4210NetworkIPCfgIPv6Addr1 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 network address 1 (xxxx:xxxx::xxxx)" ::= { dts4210NetworkIPCfgEntry 15 } dts4210NetworkIPCfgIPv6Prefix1 OBJECT-TYPE SYNTAX Unsigned32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 subnet prefix 1" ::= { dts4210NetworkIPCfgEntry 16 } dts4210NetworkIPCfgIPv6Gateway1 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 network address (xxxx:xxxx::xxxx) of the gateway 1" ::= { dts4210NetworkIPCfgEntry 17 } dts4210NetworkIPCfgIPv6Addr2 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 network address 1 (xxxx:xxxx::xxxx)" ::= { dts4210NetworkIPCfgEntry 18 } dts4210NetworkIPCfgIPv6Prefix2 OBJECT-TYPE SYNTAX Unsigned32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 subnet prefix 1" ::= { dts4210NetworkIPCfgEntry 19 } dts4210NetworkIPCfgIPv6Gateway2 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 network address (xxxx:xxxx::xxxx) of the gateway 2" ::= { dts4210NetworkIPCfgEntry 20 } dts4210NetworkIPCfgIPv6Nameserver OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 network address (xxxx:xxxx::xxxx) of the nameserver" ::= { dts4210NetworkIPCfgEntry 21 } dts4210NetworkIPCfgVLANMember1 OBJECT-TYPE SYNTAX Unsigned32 (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN Configuration 1. 0: VLAN disabled 1 .. 16 : VLAN configuration entry" ::= { dts4210NetworkIPCfgEntry 22 } dts4210NetworkIPCfgVLANMember2 OBJECT-TYPE SYNTAX Unsigned32 (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN Configuration 1. 0: VLAN disabled 1 .. 16 : VLAN configuration entry" ::= { dts4210NetworkIPCfgEntry 23 } dts4210NetworkIPCfgIP1v4RouteDest1 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route destination 1 (xxx.xxx.xxx.xxx)" ::= { dts4210NetworkIPCfgEntry 24 } dts4210NetworkIPCfgIP1v4RoutePrefix1 OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route prefix 1" ::= { dts4210NetworkIPCfgEntry 25 } dts4210NetworkIPCfgIP1v4RouteDest2 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route destination 2 (xxx.xxx.xxx.xxx)" ::= { dts4210NetworkIPCfgEntry 26 } dts4210NetworkIPCfgIP1v4RoutePrefix2 OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route prefix 2" ::= { dts4210NetworkIPCfgEntry 27 } dts4210NetworkIPCfgIP2v4RouteDest1 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route destination 1 (xxx.xxx.xxx.xxx)" ::= { dts4210NetworkIPCfgEntry 28 } dts4210NetworkIPCfgIP2v4RoutePrefix1 OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route prefix 1" ::= { dts4210NetworkIPCfgEntry 29 } dts4210NetworkIPCfgIP2v4RouteDest2 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route destination 2 (xxx.xxx.xxx.xxx)" ::= { dts4210NetworkIPCfgEntry 30 } dts4210NetworkIPCfgIP2v4RoutePrefix2 OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route prefix 2" ::= { dts4210NetworkIPCfgEntry 31 } dts4210NetworkIPCfgChanged OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Network interface configuration changed variable. 0: No configuration change 1: Configuration has changed" ::= { dts4210NetworkIPCfgEntry 32 } dts4210NetworkIPCfgConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Network interface 0 configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" ::= { dts4210NetworkIPCfgEntry 33 } dts4210NetworkIPCfgConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." ::= { dts4210NetworkIPCfgEntry 34 } -- ----------------------------------------------------------------- -- -- Network - Network VLAN Configuration -- ----------------------------------------------------------------- -- dts4210NetworkVLANCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4210NetworkVLANCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with network VLAN configuration" REFERENCE "OFS_NWVLAN1_NAME, 1, 32, 2, 15, {{120,VARTYPE_STRUCTARR}, {64,VARTYPE_STRING},{4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4210Network 50} dts4210NetworkVLANCfgEntry OBJECT-TYPE SYNTAX Dts4210NetworkVLANCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4210NetworkVLANCfgIndex } ::= { dts4210NetworkVLANCfgTable 1 } Dts4210NetworkVLANCfgEntry ::= SEQUENCE { dts4210NetworkVLANCfgIndex Integer32, dts4210NetworkVLANCfgName DisplayString, dts4210NetworkVLANCfgID Unsigned32, dts4210NetworkVLANQosBK Unsigned32, dts4210NetworkVLANQosBE Unsigned32, dts4210NetworkVLANQosEE Unsigned32, dts4210NetworkVLANQosCA Unsigned32, dts4210NetworkVLANQosVI Unsigned32, dts4210NetworkVLANQosVO Unsigned32, dts4210NetworkVLANQosIC Unsigned32, dts4210NetworkVLANQosNC Unsigned32, dts4210NetworkVLANQosPCP Unsigned32, dts4210NetworkVLANCfgChanged Unsigned32, dts4210NetworkVLANConfigCmd INTEGER, dts4210NetworkVLANConfigChangedTime TimeTicks } dts4210NetworkVLANCfgIndex OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the VLAN configuration entry (only virtual). Valid index = 1 .. 32" ::= { dts4210NetworkVLANCfgEntry 1 } dts4210NetworkVLANCfgName OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN descriptive name" ::= { dts4210NetworkVLANCfgEntry 2 } dts4210NetworkVLANCfgID OBJECT-TYPE SYNTAX Unsigned32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN ID: 1 .. 4094" ::= { dts4210NetworkVLANCfgEntry 3 } dts4210NetworkVLANQosBK OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Background (BK) Priority: 0 .. 7" ::= { dts4210NetworkVLANCfgEntry 4 } dts4210NetworkVLANQosBE OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Best Effort (BE) Priority: 0 .. 7" ::= { dts4210NetworkVLANCfgEntry 5 } dts4210NetworkVLANQosEE OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Excellent Effort (EE) Priority: 0 .. 7" ::= { dts4210NetworkVLANCfgEntry 6 } dts4210NetworkVLANQosCA OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Critical Applications (CA) Priority: 0 .. 7" ::= { dts4210NetworkVLANCfgEntry 7 } dts4210NetworkVLANQosVI OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Video (VI) Priority: 0 .. 7" ::= { dts4210NetworkVLANCfgEntry 8 } dts4210NetworkVLANQosVO OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "BTraffic type: Voice (VO) Priority: 0 .. 7" ::= { dts4210NetworkVLANCfgEntry 9 } dts4210NetworkVLANQosIC OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Internetwork Control (IC) Priority: 0 .. 7" ::= { dts4210NetworkVLANCfgEntry 10 } dts4210NetworkVLANQosNC OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Network Control (NC) Priority: 0 .. 7" ::= { dts4210NetworkVLANCfgEntry 11 } dts4210NetworkVLANQosPCP OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN QoSPCP Priority: 0 .. 7" ::= { dts4210NetworkVLANCfgEntry 12 } dts4210NetworkVLANCfgChanged OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Network interface configuration changed variable. 0: No configuration change 1: Configuration has changed" ::= { dts4210NetworkVLANCfgEntry 13 } dts4210NetworkVLANConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Network VLAN configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" ::= { dts4210NetworkVLANCfgEntry 14 } dts4210NetworkVLANConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last VLAN configuration change." ::= { dts4210NetworkVLANCfgEntry 15 } -- ----------------------------------------------------------------- -- -- Network Services -- ----------------------------------------------------------------- -- dts4210NetServices OBJECT IDENTIFIER ::= { dts4210MIB 3 } dts4210TelnetMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "Telnet mode. 0: disabled, 1: enabled" REFERENCE "OFS_SERVICE_TELNET, 1, VARTYPE_BYTE" ::= { dts4210NetServices 1 } dts4210FTPMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "FTP mode. 0: disabled, 1: enabled" REFERENCE "OFS_SERVICE_FTP, 1, VARTYPE_BYTE" ::= { dts4210NetServices 2 } dts4210SSHMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "SSH mode. 0: disabled, 1: enabled" REFERENCE "OFS_SERVICE_SSH, 1, VARTYPE_BYTE" ::= { dts4210NetServices 3 } dts4210NetServicesConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Network services configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_SERVICE_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210NetServices 100 } dts4210NetServicesConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_SERVICE_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210NetServices 101 } -- ----------------------------------------------------------------- -- -- Time handling -- ----------------------------------------------------------------- -- dts4210TimeHandling OBJECT IDENTIFIER ::= { dts4210MIB 4 } -- ----------------------------------------------------------------- -- -- Time handling - Time source -- ----------------------------------------------------------------- -- dts4210TimeSource OBJECT IDENTIFIER ::= { dts4210TimeHandling 1 } dts4210TimeSourcePriority OBJECT IDENTIFIER ::= { dts4210TimeSource 1 } dts4210TimeSourcePriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4210TimeSourcePriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with time sources" REFERENCE "OFS_TIME_TS_PRIORITY1, 1, 6, 2, 3, {{12,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4210TimeSourcePriority 1 } dts4210TimeSourcePriorityEntry OBJECT-TYPE SYNTAX Dts4210TimeSourcePriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4210TimeSourcePriorityIndex } ::= { dts4210TimeSourcePriorityTable 1 } Dts4210TimeSourcePriorityEntry ::= SEQUENCE { dts4210TimeSourcePriorityIndex Integer32, dts4210TimeSourcePriorityType INTEGER, dts4210TimeSourcePriorityAcc Unsigned32 } dts4210TimeSourcePriorityIndex OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the time source priority table (only virtual). Valid index = 1 .. 6" ::= { dts4210TimeSourcePriorityEntry 1 } dts4210TimeSourcePriorityType OBJECT-TYPE SYNTAX INTEGER { none (0), gnss (1), redundantlink (2), ptp (3), gnssdcf(4), e1(5), frequencyin(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configured time source: 0: none 1: GNSS 2: Redundant Link 3: PTP 4: GNSS-DCF 5: E1 6: Frequency-In (F-In)" ::= { dts4210TimeSourcePriorityEntry 2 } dts4210TimeSourcePriorityAcc OBJECT-TYPE SYNTAX Unsigned32 (100..100000) UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Unused, future parameter" ::= { dts4210TimeSourcePriorityEntry 3 } dts4210TimeSourcePriorityMode OBJECT-TYPE SYNTAX INTEGER { auto (0), manual (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configured time source priority mode: 0: auto, priority defined automatically by dts analyzing the sources 1: manual, priority defined by user" REFERENCE "OFS_TIME_TS_MODE, 1, VARTYPE_BYTE" ::= { dts4210TimeSourcePriority 2 } dts4210TSTimezone OBJECT-TYPE SYNTAX Unsigned32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Time zone for the selected time source (excluding NTP). 0: UTC 1-99: See user manual 800870, time zone table" REFERENCE "OFS_TIME_SOURCE_TZ, 1, VARTYPE_BYTE" ::= { dts4210TimeSource 2 } dts4210TSStratumMode OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Configured stratum level of the DTS. 0: Automatic Stratum level calculation 1-15: Fix Stratum level" REFERENCE "OFS_TIME_CSTRATUM, 1, VARTYPE_BYTE" ::= { dts4210TimeSource 3 } dts4210TSStratumErrorLimit OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Stratum level limit to generate an alarm. Valid range 1-16" REFERENCE "OFS_TIME_ESTRATUM, 1, VARTYPE_BYTE" ::= { dts4210TimeSource 4 } dts4210TSTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..2160) UNITS "minute" MAX-ACCESS read-write STATUS current DESCRIPTION "Time duration to set an alarm after a time source failure. Range 1-2160 minutes" REFERENCE "OFS_TIME_SOURCE_TO, 4, VARTYPE_DWORD" ::= { dts4210TimeSource 5 } dts4210TSStratumTimeout1 OBJECT-TYPE SYNTAX Unsigned32 (1..9999) UNITS "hour" MAX-ACCESS read-write STATUS current DESCRIPTION "Time duration to increase the stratum level from 0 to 16 in case of a source failure. Range 1-9999 hours" REFERENCE "OFS_TIME_STRATUM_TO, 4, VARTYPE_DWORD" ::= { dts4210TimeSource 6 } dts4210TSOffsetPerStratum OBJECT-TYPE SYNTAX Unsigned32 (0..40000) UNITS "milli seconds (ms)" MAX-ACCESS read-write STATUS current DESCRIPTION "Time offset to calculate the stratum level in case of a resumed time synchronisation. Range 0-40000 ms E.g. -configured offset per stratum 30 ms -measured offset 150 ms -> Stratum level = 150/30 = 5" REFERENCE "OFS_TIME_STRATUM_OFS, 4, VARTYPE_DWORD" ::= { dts4210TimeSource 7 } dts4210TSStratumChangeSourceFail OBJECT-TYPE SYNTAX INTEGER { default (0), immediate (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Behavior of Stratum after time source lost: 0: DEFAULT - Default decrease of stratum level. 1: IMMEDIATE - Stratum is decreased immediate after time source lost." REFERENCE "OFS_TIME_STRATUM_CHANGE_SOURCE_FAIL, 4, VARTYPE_DWORD" ::= { dts4210TimeSource 8 } dts4210TSMaxOffsetForTimeValid OBJECT-TYPE SYNTAX Unsigned32 (100..250000000) UNITS "nano seconds (ns)" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum time offset to set time valid at startup. Range 100-250000000 ns" REFERENCE "OFS_TIME_OK_OFS, 4, VARTYPE_DWORD" ::= { dts4210TimeSource 9 } dts4210TSAdjustmentMode OBJECT-TYPE SYNTAX INTEGER { follow (0), set (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Behavior of the time adjusment: 0: FOLLOW - Adjust the time with a configured limited speed. Takes a longer time to correct the time offset. 1: SET - Adjust the time with some big steps." REFERENCE "OFS_TIME_COR_MODE, 1, VARTYPE_BYTE" ::= { dts4210TimeSource 10 } dts4210TSMaxAdjusmentSpeed OBJECT-TYPE SYNTAX Unsigned32 (0..10000000) UNITS "nano seconds per seconds (ns/s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum adjusment speed in mode FOLLOW Range 0..10000000 ns/s" REFERENCE "OFS_TIME_MAX_CORR, 4, VARTYPE_DWORD" ::= { dts4210TimeSource 11 } dts4210TSQuartzType OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of the DTS core. Range 0..255 (default 1)" REFERENCE "OFS_TIME_QUARTZ_TYP, 1, VARTYPE_BYTE" ::= { dts4210TimeSource 12 } dts4210TSOffsetSynchOnly OBJECT-TYPE SYNTAX Unsigned32 (0 | 1000..5000000) UNITS "nano seconds (ns)" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum time offset to adjust the time. If the time offset is larger than this value an alarm is generated and the time is no longer adjusted. Range 1000-5000000 ns (1us-5ms) 0: Synchronisation only is disabled" REFERENCE "OFS_TIME_SYN_ONLY, 4, VARTYPE_DWORD" ::= { dts4210TimeSource 13 } dts4210TSLeapSecMode OBJECT-TYPE SYNTAX INTEGER { none (0), insert1Second (1), auto (2), cutOff1Second (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of the leap second 0: None 1: Insert 1 second at the leap date/time 2: Auto 255: Cut off 1 second at the leap date/time" REFERENCE "OFS_TIME_LEAP_SEC_MODE, 1, VARTYPE_BYTE" ::= { dts4210TimeSource 14 } dts4210TSLeapSecDate OBJECT-TYPE SYNTAX DisplayString UNITS "Date/Time string hh:mm:ss DD.MM.YY" MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the system time (UTC) of the leap second. Format: ASCII string = hh:mm:ss DD.MM.YY" REFERENCE "OFS_TIME_LEAP_SEC_DATE, 17, VARTYPE_STRING" ::= { dts4210TimeSource 15 } dts4210TSRTCMode OBJECT-TYPE SYNTAX INTEGER { off (0), on (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "RTC (Real Time Clock) mode: 0: off 1: on" REFERENCE "OFS_TIME_RTC_MODE, 1, VARTYPE_BYTE" ::= { dts4210TimeSource 16 } dts4210TSAlarmBigOffset OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) UNITS "nano seconds (ns)" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum time offset to source for alarm Time source big offset. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_TIME_AL_BIG_OFS, 4, VARTYPE_DWORD" ::= { dts4210TimeSource 17 } dts4210TSConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Time source configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_TIME_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210TimeSource 100 } dts4210TSConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_TIME_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210TimeSource 101 } -- ----------------------------------------------------------------- -- -- Time handling - GNSS config -- ----------------------------------------------------------------- -- dts4210TimeGNSSConfig OBJECT IDENTIFIER ::= { dts4210TimeHandling 10 } dts4210GNSSConstellationMode OBJECT-TYPE SYNTAX INTEGER { gnssGPS (0), gnssGLONASS (2), gnssBeiDou (3), gnssGPSGLONASS (7), gnssGPSBeiDou (8), gnssGLONASSBeiDou (11) } MAX-ACCESS read-write STATUS current DESCRIPTION "GNSS constellation mode used for navigation solution 0: GPS 2: GLONASS 3: BeiDou 7: GPS & GLONASS 8: GPS & BeiDou 11: GLONASS & BeiDou" REFERENCE "OFS_GNSS_CONSTELLATION_MODE, 1, VARTYPE_BYTE" ::= { dts4210TimeGNSSConfig 1 } dts4210GNSSMaxOffset OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Max GNSS offset to generate an alarm. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_GNSS_ALARM_SOURCE_OFFSET, 4, VARTYPE_DWORD" ::= { dts4210TimeGNSSConfig 2 } dts4210GNSSSurveyInMode OBJECT-TYPE SYNTAX INTEGER { disableFixedPosition (0), fixedPosition (1), manualPosition (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Survey mode for position 0: Disabled, no Fixed Position 1: Fixed Position 2: Manual position" REFERENCE "OFS_GNSS_SURVEYIN_MODE, 1, VARTYPE_BYTE" ::= { dts4210TimeGNSSConfig 10 } dts4210GNSSSurveyInObservationTime OBJECT-TYPE SYNTAX Unsigned32 (0..604800) UNITS "seconds (s)" MAX-ACCESS read-write STATUS current DESCRIPTION "Fixed position minimum observation time (sec)" REFERENCE "OFS_GNSS_SURVEYIN_OBS_TIME, 4, VARTYPE_DWORD" ::= { dts4210TimeGNSSConfig 11 } dts4210GNSSSurveyInObservationAccuracy OBJECT-TYPE SYNTAX Unsigned32 (0..100000) UNITS "millimeter (mm)" MAX-ACCESS read-write STATUS current DESCRIPTION "Fixed position minimum position accuracy (mm)" REFERENCE "OFS_GNSS_SURVEYIN_POS_ACC, 4, VARTYPE_DWORD" ::= { dts4210TimeGNSSConfig 12 } dts4210GNSSSurveyInCommand OBJECT-TYPE SYNTAX INTEGER { noAction (0), deletePositionData (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Survey mode for position 0: None 1: Delete Fixed Position data" REFERENCE "OFS_GNSS_SURVEYIN_POS_CMD, 1, VARTYPE_BYTE" ::= { dts4210TimeGNSSConfig 19 } dts4210GNSSAntennaDelay OBJECT-TYPE SYNTAX Unsigned32 (0..1000) UNITS "nano seconds (ns)" MAX-ACCESS read-write STATUS current DESCRIPTION "Antenna cable delay in nano secconds" REFERENCE "OFS_GNSS_ANTENNA_DELAY, 4, VARTYPE_DWORD" ::= { dts4210TimeGNSSConfig 20 } dts4210GNSSAntennaSupply OBJECT-TYPE SYNTAX INTEGER { voltage5000mV (0), voltage3300mV (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Antenna power supply voltage" REFERENCE "OFS_GNSS_ANTENNA_PWR_SUPPLY, 1, VARTYPE_BYTE" ::= { dts4210TimeGNSSConfig 21 } dts4210GNSSSensSVCount OBJECT-TYPE SYNTAX Unsigned32 (1..20) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum number of satellites required for navigation" REFERENCE "OFS_GNSS_SENS_SV_COUNT, 1, VARTYPE_BYTE" ::= { dts4210TimeGNSSConfig 30 } dts4210GNSSSensSVSigLevel OBJECT-TYPE SYNTAX Unsigned32 (20..40) UNITS "dBHz" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum signal level of satellites required for navigation" REFERENCE "OFS_GNSS_SENS_SV_SIGNAL_LEVEL, 1, VARTYPE_BYTE" ::= { dts4210TimeGNSSConfig 31 } dts4210GNSSConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "GNSS configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_GNSS_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210TimeGNSSConfig 100 } dts4210GNSSConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_GNSS_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210TimeGNSSConfig 101 } -- ----------------------------------------------------------------- -- -- Time handling - Redundant Link operation -- ----------------------------------------------------------------- -- dts4210TimeRedundantLink OBJECT IDENTIFIER ::= { dts4210TimeHandling 20 } dts4210RedundantLinkMaxOffsetSlaveTimeSource OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) UNITS "nano seconds (ns)" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum time offset from current time to the slave time source to generate an alarm. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_RED_MAX_OFS, 4, VARTYPE_DWORD" ::= { dts4210TimeRedundantLink 3 } dts4210RedundantLinkConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Redundant operation configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_RED_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210TimeRedundantLink 100 } dts4210RedundantLinkConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_RED_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210TimeRedundantLink 101 } dts4210RedundantLinkManualMasterCmd OBJECT-TYPE SYNTAX INTEGER { auto (0), takeOverMasterRole (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Command to change the slave to master role. 0: Auto 1: Take over the master role" REFERENCE "OFS_RED_MAN_MAS, 1, VARTYPE_BYTE" ::= { dts4210TimeRedundantLink 102 } -- ----------------------------------------------------------------- -- -- Time handling - PTP configuration sets -- ----------------------------------------------------------------- -- dts4210TimePTPConfig OBJECT IDENTIFIER ::= { dts4210TimeHandling 30 } dts4210TimePTPConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4210TimePTPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with ptp configuration sets" REFERENCE "OFS_PTP1_MODE, 1, 12, 2, 22, { {88,VARTYPE_STRUCTARR}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}}" ::= { dts4210TimePTPConfig 1 } dts4210TimePTPConfigEntry OBJECT-TYPE SYNTAX Dts4210TimePTPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4210TimePTPConfigIndex } ::= { dts4210TimePTPConfigTable 1 } Dts4210TimePTPConfigEntry ::= SEQUENCE { dts4210TimePTPConfigIndex Integer32, dts4210PTPMode INTEGER, dts4210PTPProfile INTEGER, dts4210PTPDelayMechanism INTEGER, dts4210PTPTranspProto INTEGER, dts4210PTPIPv6Scope Unsigned32, dts4210PTPLeapOffset Unsigned32, dts4210PTPPriority1 Unsigned32, dts4210PTPPriority2 Unsigned32, dts4210PTPDomain Unsigned32, dts4210PTPAnnounceInterval Integer32, dts4210PTPSyncInterval Integer32, dts4210PTPAnnounceTO Integer32, dts4210PTPSyncReceiptTO Integer32, dts4210PTPDelayRequestInterval Integer32, dts4210PTPUDPTTL Integer32, dts4210PTPUnicastMasterOnly EnabledDisabled, dts4210PTPUnicastRequestDuration Integer32, dts4210PTPUnicastLocalPriority Integer32, dts4210PTPQueryInterval Integer32, dts4210PTPPowerGmID Integer32, dts4210PTPPowerAltTimeOfs Integer32 } dts4210TimePTPConfigIndex OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the PTP configuration(only virtual). Valid index = 1 .. 3" ::= { dts4210TimePTPConfigEntry 1 } dts4210PTPMode OBJECT-TYPE SYNTAX INTEGER { off (0), mastermulticastonestep(1), mastermulticasttwostep(2), masterunicastonestep(3), masterunicasttwostep(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP mode 0: Off 1: Master Multicast 1-step 2: Master Multicast 2-step 3: Master Unicast 1-step 4: Master Unicast 2-step" ::= { dts4210TimePTPConfigEntry 2 } dts4210PTPProfile OBJECT-TYPE SYNTAX INTEGER { none (0), defaultE2E (1), defaultP2P (2), utility (3), itutG82651 (4), itutG82751 (5), itutG82752 (6), ieee8021as (7) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP profile. 0: none 1: default E2E 2: default P2P 3: utility 4: ITU-T G.8265.1 5: ITU-T G.8275.1 6: ITU-T G.8275.2 7: IEEE 802.1AS" ::= { dts4210TimePTPConfigEntry 3 } dts4210PTPDelayMechanism OBJECT-TYPE SYNTAX INTEGER { e2e (0), p2p (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP delay mechanism. 0: E2E 1: P2P" ::= { dts4210TimePTPConfigEntry 4 } dts4210PTPTranspProto OBJECT-TYPE SYNTAX INTEGER { ipv4 (0), ipv6 (1), layer2 (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP transport protocol 0: IPv4 1: IPv6 2: Layer 2" ::= { dts4210TimePTPConfigEntry 5 } dts4210PTPIPv6Scope OBJECT-TYPE SYNTAX Unsigned32 (0..14) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP IPv6 mcast scope" ::= { dts4210TimePTPConfigEntry 6 } dts4210PTPLeapOffset OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "PTP leap offset (TAI-UTC)" ::= { dts4210TimePTPConfigEntry 7 } dts4210PTPPriority1 OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP priority 1" ::= { dts4210TimePTPConfigEntry 8 } dts4210PTPPriority2 OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP priority 2" ::= { dts4210TimePTPConfigEntry 9 } dts4210PTPDomain OBJECT-TYPE SYNTAX Unsigned32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP domain number" ::= { dts4210TimePTPConfigEntry 10 } dts4210PTPAnnounceInterval OBJECT-TYPE SYNTAX Integer32 (-7..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Announce interval. Interval = 2 power of value (2^value) E.g. Value = 4 --> Interval = 16 seconds Range: -7 .. 7" ::= { dts4210TimePTPConfigEntry 11 } dts4210PTPSyncInterval OBJECT-TYPE SYNTAX Integer32 (-7..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Syc interval. Interval = 2 power of value (2^value) E.g. Value = -1 --> Interval = 0.5 seconds Range: -7 .. 7" ::= { dts4210TimePTPConfigEntry 12 } dts4210PTPAnnounceTO OBJECT-TYPE SYNTAX Integer32 (2..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Announce timeout in seconds" ::= { dts4210TimePTPConfigEntry 13 } dts4210PTPSyncReceiptTO OBJECT-TYPE SYNTAX Integer32 (2..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Sync timeout in seconds. The number of sync/follow up messages that may go missing before triggering a Best Master Clock election. This option is used for running in gPTP mode according to the 802.1AS-2011 standard." ::= { dts4210TimePTPConfigEntry 14 } dts4210PTPDelayRequestInterval OBJECT-TYPE SYNTAX Integer32 (-7..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Interval between Delay Request messages. Interval = 2 power of value (2^value) E.g. Value = -1 --> Interval = 0.5 seconds Range: -7 .. 7" ::= { dts4210TimePTPConfigEntry 15 } dts4210PTPUDPTTL OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Time to live (TTL) value for IPv4 multicast messages and the hop limit for IPv6 multicast messages." ::= { dts4210TimePTPConfigEntry 16 } dts4210PTPUnicastMasterOnly OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "Prevents the port from entering the SLAVE state. Announce messages received on this port will be ignored. 0: Disable 1: Master only enabled." ::= { dts4210TimePTPConfigEntry 17 } dts4210PTPUnicastRequestDuration OBJECT-TYPE SYNTAX Integer32 (60..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "The service time in seconds to be requested during unicast discovery. Note that the remote node is free to grant a different duration." ::= { dts4210TimePTPConfigEntry 18 } dts4210PTPUnicastLocalPriority OBJECT-TYPE SYNTAX Integer32 (0..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this option is associated with Announce messages arriving on a particular port and is used as a tie breaker whenever clockClass, clockAccuracy, offsetScaledLogVariance, and priority2 are equal." ::= { dts4210TimePTPConfigEntry 19 } dts4210PTPQueryInterval OBJECT-TYPE SYNTAX Integer32 (0..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this option is associated with Announce messages arriving on a particular port and is used as a tie breaker whenever clockClass, clockAccuracy, offsetScaledLogVariance, and priority2 are equal." ::= { dts4210TimePTPConfigEntry 20 } dts4210PTPPowerGmID OBJECT-TYPE SYNTAX Integer32 (0..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "This Granmaster-ID is used in the C37.238 power profiles to identify network participants." ::= { dts4210TimePTPConfigEntry 21 } dts4210PTPPowerAltTimeOfs OBJECT-TYPE SYNTAX Integer32 (0..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this option selects the alternate Time Offset that is sent in a TLV with C37.238 power profiles" ::= { dts4210TimePTPConfigEntry 22 } dts4210PTPTAIUTCOffset OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP leap offset (TAI-UTC)" REFERENCE "OFS_PTP_TAIUTC_OFFSET, 1, VARTYPE_BYTE" ::= { dts4210TimePTPConfig 2 } dts4210PTPSlaveInterface OBJECT-TYPE SYNTAX INTEGER { none (0), lan2 (2), lan3 (3), lan4 (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP Slave ethernet interface 0 = none 2 = LAN2 3 = LAN3 4 = LAN4" REFERENCE "OFS_PTP_SLAVE_INTERFACE, 1, VARTYPE_BYTE" ::= { dts4210TimePTPConfig 10 } dts4210PTPSlaveMaxOffset OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Max offset to PTP Master to generate an alarm. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_PTP_MAX_OFFSET, 4, VARTYPE_DWORD" ::= { dts4210TimePTPConfig 11 } dts4210PTPSlaveUnicastMasterTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4210PTPSlaveUnicastMasterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with PTP slave Unicast master configuration" REFERENCE "OFS_PTP_SLAVE_MASTER_IP1, 1, 8, 2, 2, {{68,VARTYPE_STRUCTARR},{64,VARTYPE_STRING}}" ::= { dts4210TimePTPConfig 12 } dts4210PTPSlaveUnicastMasterEntry OBJECT-TYPE SYNTAX Dts4210PTPSlaveUnicastMasterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4210PTPSlaveUnicastMasterIndex } ::= { dts4210PTPSlaveUnicastMasterTable 1 } Dts4210PTPSlaveUnicastMasterEntry ::= SEQUENCE { dts4210PTPSlaveUnicastMasterIndex Integer32, dts4210PTPSlaveUnicastMasterAddr DTSNetworkName } dts4210PTPSlaveUnicastMasterIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index (only virtual). Valid index = 1 .. 8" ::= { dts4210PTPSlaveUnicastMasterEntry 1 } dts4210PTPSlaveUnicastMasterAddr OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4/IPv6 ptp unicast master address." ::= { dts4210PTPSlaveUnicastMasterEntry 2 } dts4210PTPConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP function configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_PTP_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210TimePTPConfig 100 } dts4210PTPConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_PTP_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210TimePTPConfig 101 } -- ----------------------------------------------------------------- -- -- Time handling - DCF-HQ source -- ----------------------------------------------------------------- -- dts4210TimeDCFINConfig OBJECT IDENTIFIER ::= { dts4210TimeHandling 40 } dts4210DCFOffsetCorrection OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Offset corection for DCF as time source" REFERENCE "OFS_DCFIN_OFFSET_COR, 4, VARTYPE_DWORD" ::= { dts4210TimeDCFINConfig 10 } dts4210DCFMaxOffset OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Max DCF offset to generate an alarm. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_DCFIN_MAX_OFFSET, 4, VARTYPE_DWORD" ::= { dts4210TimeDCFINConfig 11 } dts4210DCFINConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DCF source configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_DCFIN_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210TimeDCFINConfig 100 } dts4210DCFINConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_DCFIN_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210TimeDCFINConfig 101 } -- ----------------------------------------------------------------- -- -- Time handling - Frequency-In source -- ----------------------------------------------------------------- -- dts4210TimeFINConfig OBJECT IDENTIFIER ::= { dts4210TimeHandling 60 } dts4210FINMode OBJECT-TYPE SYNTAX INTEGER { mhz10(1), mhz2dot048(2), hz1(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Signal mode for source 1: 10 MHz 2: 2.048 MHz 3: 1Hz (1PPS)" REFERENCE "OFS_F_IN_MODE, 4, VARTYPE_DWORD" ::= { dts4210TimeFINConfig 10 } dts4210FINMaxOffset OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Max F-In offset to generate an alarm. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_F_IN_MAX_OFFSET, 4, VARTYPE_DWORD" ::= { dts4210TimeFINConfig 11 } dts4210FINConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "F-In source configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_F_IN_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210TimeFINConfig 100 } dts4210FINConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_F_IN_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210TimeFINConfig 101 } -- ----------------------------------------------------------------- -- -- Time handling - NTP server -- ----------------------------------------------------------------- -- dts4210TimeNTPServer OBJECT IDENTIFIER ::= { dts4210TimeHandling 80 } -- ----------------------------------------------------------------- -- -- Time handling - NTP server - Broadcast table -- ----------------------------------------------------------------- -- dts4210NTPBroadcastTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4210NTPBroadcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with NTP broadcast configuration" REFERENCE "OFS_NTP_BCASTIP1, 1, 16, 2, 5, {{76,VARTYPE_STRUCTARR},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4210TimeNTPServer 2 } dts4210NTPBroadcastEntry OBJECT-TYPE SYNTAX Dts4210NTPBroadcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4210NTPBroadcastIndex } ::= { dts4210NTPBroadcastTable 1 } Dts4210NTPBroadcastEntry ::= SEQUENCE { dts4210NTPBroadcastIndex Integer32, dts4210NTPBroadcastAddr DTSNetworkName, dts4210NTPBrodcastInterval Unsigned32, dts4210NTPBroadcastTTL Unsigned32, dts4210NTPBroadcastKey Integer32 } dts4210NTPBroadcastIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the NTP broadcast entry (only virtual). Valid index = 1 .. 4" ::= { dts4210NTPBroadcastEntry 1 } dts4210NTPBroadcastAddr OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 broadcast or multicast address (xxx.xxx.xxx.xxx) to send out NTP time information." ::= { dts4210NTPBroadcastEntry 2 } dts4210NTPBrodcastInterval OBJECT-TYPE SYNTAX Unsigned32 (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Broadcast / multicast send interval. Interval = 2 power of value (2^value) E.g. Value = 4 --> Interval = 16 seconds" ::= { dts4210NTPBroadcastEntry 3 } dts4210NTPBroadcastTTL OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast time to live value. Range: 1..255" ::= { dts4210NTPBroadcastEntry 4 } dts4210NTPBroadcastKey OBJECT-TYPE SYNTAX Integer32 (-1 | 0 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "NTP broadcast key 0=off, 1..65534=key, -1=autokey" ::= { dts4210NTPBroadcastEntry 5 } dts4210NTPKeyFileCmd OBJECT-TYPE SYNTAX INTEGER { notDefined (0), importKeysFromFile (1), exportKeysToFile (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Import/export NTP keys. 0: Not defined 1: Import keys from file (/ram directory) 2: Export keys to file (/ram directory)" REFERENCE "OFS_NTP_KEY_FILE_CMD, 1, VARTYPE_BYTE" ::= { dts4210TimeNTPServer 20 } dts4210NTPKeyTrusted OBJECT-TYPE SYNTAX DisplayString (SIZE(0..47)) MAX-ACCESS read-write STATUS current DESCRIPTION "List of NTP trusted keys separated by spaces" REFERENCE "OFS_NTP_KEY_TRUSTED, 48, VARTYPE_STRING" ::= { dts4210TimeNTPServer 21 } dts4210NTPKeyRequest OBJECT-TYPE SYNTAX Integer32 (0 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "NTP request key 0: off 1..65534: key" REFERENCE "OFS_NTP_KEY_REQUEST, 2, VARTYPE_WORD" ::= { dts4210TimeNTPServer 22 } dts4210NTPKeyControl OBJECT-TYPE SYNTAX Integer32 (0 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "NTP control key 0: off 1..65534: key" REFERENCE "OFS_NTP_KEY_CONTROL, 2, VARTYPE_WORD" ::= { dts4210TimeNTPServer 23 } dts4210NTPKeyGeneratorCmd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..49)) MAX-ACCESS read-write STATUS current DESCRIPTION "Command according user manual" REFERENCE "OFS_NTP_KEYGEN_CMD, 50, VARTYPE_STRING" ::= { dts4210TimeNTPServer 24 } dts4210NTPAutokeyPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password for the autokey authentification" REFERENCE "OFS_NTP_AUTOKEY_PW, 15, VARTYPE_STRING" ::= { dts4210TimeNTPServer 25 } dts4210NTPAccessControl OBJECT-TYPE SYNTAX INTEGER { on (0), local (1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Access control for ntp query 0: On (all allowed) 1: Local netwotk only 2: Off (all blocked)" REFERENCE "OFS_NTP_ACCESS_CTL, 1, VARTYPE_BYTE" ::= { dts4210TimeNTPServer 26 } dts4210NTPConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "NTP server configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_NTP_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210TimeNTPServer 100 } dts4210NTPConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_NTP_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210TimeNTPServer 101 } -- ----------------------------------------------------------------- -- -- Time handling - Manual time set -- ----------------------------------------------------------------- -- dts4210TimeManualSet OBJECT IDENTIFIER ::= { dts4210TimeHandling 90 } dts4210ManualTimeSetUTC OBJECT-TYPE SYNTAX DisplayString (SIZE(17 | 19)) UNITS "Date/Time string hh:mm:ss DD.MM.YY" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the DTS system time (UTC). After set of this variable you have to set the variable dts4210ManualTimeCmd = 1 to submit the time. Format: ASCII string = hh:mm:ss DD.MM.YY" REFERENCE "OFS_MANTIME_UTC, 17, VARTYPE_STRING" ::= { dts4210TimeManualSet 1 } dts4210ManualTimeSetDiff OBJECT-TYPE SYNTAX Integer32 (-1000000000..-10|0|10..1000000000) UNITS "nano seconds (ns)" MAX-ACCESS read-write STATUS current DESCRIPTION "Correct the DTS system time by a difference value. After set of this variable you have to set the variable dts4210ManualTimeCmd = 2 to submit the time." REFERENCE "OFS_MANTIME_DIFF, 4, VARTYPE_DWORD" ::= { dts4210TimeManualSet 2 } dts4210ManualTimeCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), setTime (1), correctTime (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Change command to set the system time manual. 0: No action 1: Set the time by dts4210ManualTimeSetUTC 2: Correct the time by dts4210ManualTimeSetDiff" REFERENCE "OFS_MANTIME_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210TimeManualSet 100 } -- ----------------------------------------------------------------- -- -- Output lines -- ----------------------------------------------------------------- -- dts4210OutputLines OBJECT IDENTIFIER ::= { dts4210MIB 5 } -- ----------------------------------------------------------------- -- -- Output lines - DCF main out -- ----------------------------------------------------------------- -- dts4210OutMainDCF OBJECT IDENTIFIER ::= { dts4210OutputLines 1 } dts4210OutLineMainDCFTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4210OutLineMainDCFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with MainDCF output configuration" REFERENCE "OFS_DCF1_MODE, 1, 4, 2, 3, {{12,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4210OutMainDCF 1 } dts4210OutLineMainDCFEntry OBJECT-TYPE SYNTAX Dts4210OutLineMainDCFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4210OutLineMainDCFIndex } ::= { dts4210OutLineMainDCFTable 1 } Dts4210OutLineMainDCFEntry ::= SEQUENCE { dts4210OutLineMainDCFIndex Integer32, dts4210OutMainDCFMode INTEGER, dts4210OutMainDCFTimezone Unsigned32 } dts4210OutLineMainDCFIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the MainDCF configuration(only virtual). Valid index = 1 .. 4" ::= { dts4210OutLineMainDCFEntry 1 } dts4210OutMainDCFMode OBJECT-TYPE SYNTAX INTEGER { disable (0), dcf (1), pps (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the DCF output line. 0: disabled 1: DCF output 1: 1PPS output" ::= { dts4210OutLineMainDCFEntry 2 } dts4210OutMainDCFTimezone OBJECT-TYPE SYNTAX Unsigned32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Time zone for the generated DCF time code. 0: UTC 1-99: See user manual 800870, time zone table" ::= { dts4210OutLineMainDCFEntry 3 } dts4210OutMainDCFConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DCF output line configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_DCF_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210OutMainDCF 100 } dts4210OutMainDCFConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_DCF_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210OutMainDCF 101 } -- ----------------------------------------------------------------- -- -- Output lines - Pulse out / Frequency / DCF -- ----------------------------------------------------------------- -- dts4210OutLinePulseFREQ OBJECT IDENTIFIER ::= { dts4210OutputLines 2 } dts4210OutLinePulseFREQTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4210OutLinePulseFREQEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with PulseFREQ output configuration" REFERENCE "OFS_FREQPULS1_MODE, 1, 8, 2, 2, {{8,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER}}" ::= { dts4210OutLinePulseFREQ 1 } dts4210OutLinePulseFREQEntry OBJECT-TYPE SYNTAX Dts4210OutLinePulseFREQEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4210OutLinePulseFREQIndex } ::= { dts4210OutLinePulseFREQTable 1 } Dts4210OutLinePulseFREQEntry ::= SEQUENCE { dts4210OutLinePulseFREQIndex Integer32, dts4210OutLinePulseFREQMode INTEGER } dts4210OutLinePulseFREQIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the PulseFREQ configuration(only virtual). Valid index = 1 .. 8" ::= { dts4210OutLinePulseFREQEntry 1 } dts4210OutLinePulseFREQMode OBJECT-TYPE SYNTAX INTEGER { disabled (0), mode10MHz (1), mode2048kHz (2), mode1PPS (3), mode2Hz (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the PulseFREQ output line. 0: disabled 1: Set output to 10MHz output 2: Set output to 2048kHz 3: Set output to 1PPS 4: Set outupt to 2Hz" ::= { dts4210OutLinePulseFREQEntry 2 } dts4210OutLinePulseFREQConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "PulseFREQ output line configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_FREQPULS_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210OutLinePulseFREQ 100 } dts4210OutLinePulseFREQConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_FREQPULS_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210OutLinePulseFREQ 101 } -- ----------------------------------------------------------------- -- -- Output lines - Serial -- ----------------------------------------------------------------- -- dts4210OutLineSerial OBJECT IDENTIFIER ::= { dts4210OutputLines 3 } dts4210OutLineSerialTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4210OutLineSerialEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with Serial output configuration" REFERENCE "OFS_SERIAL1_MODE, 1, 8, 2, 6, {{20,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{12,VARTYPE_STRING}}" ::= { dts4210OutLineSerial 1 } dts4210OutLineSerialEntry OBJECT-TYPE SYNTAX Dts4210OutLineSerialEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4210OutLineSerialIndex } ::= { dts4210OutLineSerialTable 1 } Dts4210OutLineSerialEntry ::= SEQUENCE { dts4210OutLineSerialIndex Integer32, dts4210OutLineSerialMode EnabledDisabled, dts4210OutLineSerialTimezone Unsigned32, dts4210OutLineSerialComMode INTEGER, dts4210OutLineSerialComParam Integer32, dts4210OutLineSerialTeleFile DisplayString } dts4210OutLineSerialIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the Serial configuration(only virtual). Valid index = 1 .. 8" ::= { dts4210OutLineSerialEntry 1 } dts4210OutLineSerialMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the serial output. 0: disabled 1: enabled" ::= { dts4210OutLineSerialEntry 2 } dts4210OutLineSerialTimezone OBJECT-TYPE SYNTAX Unsigned32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Time zone for the generated serial time code.. 0: UTC 1-99: See user manual 800870, time zone table" ::= { dts4210OutLineSerialEntry 3 } dts4210OutLineSerialComMode OBJECT-TYPE SYNTAX INTEGER { outRS232 (1), inOutRS232in (2), inOutRS485in (3), rs422SendOnly (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "COM mode 1: out (RS232) 2: in+out (RS232 in) 3: in+out (RS485 in) 4: RS422 send only" ::= { dts4210OutLineSerialEntry 4 } dts4210OutLineSerialComParam OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "COM parameter Bit 0-3: 0 = 300Bds 1 = 600Bds 2 = 1200Bds 3 = 2400Bds 4 = 4800Bds 5 = 9600Bds 6 = 19200Bds 7 = 38400Bds Bit 4: 0 = 7 Databits, 1 = 8 Databits Bit 5: 0 = 1 Stopbits, 1 = 2 Stopbits Bit 7-8: 0 = none parity 1 = even parity 2 = odd parity" ::= { dts4210OutLineSerialEntry 5 } dts4210OutLineSerialTeleFile OBJECT-TYPE SYNTAX DisplayString (SIZE(11)) MAX-ACCESS read-write STATUS current DESCRIPTION "Telegramm file: name.tel (name max. 11 chars)" ::= { dts4210OutLineSerialEntry 6 } dts4210OutLineSerialConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Serial output configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_SERIAL_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210OutLineSerial 100 } dts4210OutLineSerialConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_SERIAL_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210OutLineSerial 101 } -- ----------------------------------------------------------------- -- -- Output lines - IRIG / DCF-FSK -- ----------------------------------------------------------------- -- dts4210OutLineIRIG OBJECT IDENTIFIER ::= { dts4210OutputLines 4 } dts4210OutLineIRIGTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4210OutLineIRIGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with IRIG output configuration" REFERENCE "OFS_IRIG1_MODE, 1, 4, 2, 4, {{16,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4210OutLineIRIG 1 } dts4210OutLineIRIGEntry OBJECT-TYPE SYNTAX Dts4210OutLineIRIGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4210OutLineIRIGIndex } ::= { dts4210OutLineIRIGTable 1 } Dts4210OutLineIRIGEntry ::= SEQUENCE { dts4210OutLineIRIGIndex Integer32, dts4210OutLineIRIGMode INTEGER, dts4210OutLineIRIGTimezone Unsigned32, dts4210OutLineIRIGOutputLevel Integer32 } dts4210OutLineIRIGIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the IRIG configuration(only virtual). Valid index = 1 .. 4" ::= { dts4210OutLineIRIGEntry 1 } dts4210OutLineIRIGMode OBJECT-TYPE SYNTAX INTEGER { disabled (0), irigB (1), irigB12h (2), irigBDiem (3), irigB123 (4), afnorA (5), afnorC (6), dcfFSK (7), irigE122 (8), irigB126 (9) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the IRIG / AFNOR output. 0: disabled 1: IRIG-B (B122) 2: IRIG-B 12h (B122) 3: IRIG-B DIEM (B122) 4: IRIG-B123 5: AFNOR-A (NFS 87-500) 6: AFNOR-C (NFS 87-500) 7: DCF-FSK 8: IRIG-E122 DIEM 9: IRIG-B126" -- REFERENCE "OFS_IRIG1_MODE, 1, VARTYPE_BYTE" ::= { dts4210OutLineIRIGEntry 2 } dts4210OutLineIRIGTimezone OBJECT-TYPE SYNTAX Unsigned32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Time zone for the generated serial time code.. 0: UTC 1-99: See user manual 800870, time zone table" -- REFERENCE "OFS_IRIG1_TZ, 1, VARTYPE_BYTE" ::= { dts4210OutLineIRIGEntry 3 } dts4210OutLineIRIGOutputLevel OBJECT-TYPE SYNTAX Integer32 (2000..4000) MAX-ACCESS read-write STATUS current DESCRIPTION "IRIG/AFNOR output voltage (Vpp) with a 50 ohm load" -- REFERENCE "OFS_IRIG1_LEVEL, 4, VARTYPE_DWORD" ::= { dts4210OutLineIRIGEntry 4 } dts4210OutLineIRIGConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "IRIG output configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_IRIG_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210OutLineIRIG 100 } dts4210OutLineIRIGConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_IRIG_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210OutLineIRIG 101 } -- ----------------------------------------------------------------- -- -- Output lines - E1 -- ----------------------------------------------------------------- -- dts4210OutputLinesE1 OBJECT IDENTIFIER ::= { dts4210OutputLines 5 } dts4210OutLineE1Table OBJECT-TYPE SYNTAX SEQUENCE OF Dts4210OutLineE1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with E1 output configuration" REFERENCE "OFS_E1_1_MODE, 1, 4, 2, 5, {{20,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4210OutputLinesE1 1 } dts4210OutLineE1Entry OBJECT-TYPE SYNTAX Dts4210OutLineE1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4210OutLineE1Index } ::= { dts4210OutLineE1Table 1 } Dts4210OutLineE1Entry ::= SEQUENCE { dts4210OutLineE1Index Integer32, dts4210OutLineE1Mode INTEGER, dts4210OutLineE1Port INTEGER, dts4210OutLineE1Framing INTEGER, dts4210OutLineE1CRC INTEGER } dts4210OutLineE1Index OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the E1 operation mode (only virtual). Valid index = 1 .. 4" ::= { dts4210OutLineE1Entry 1 } dts4210OutLineE1Mode OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the E1 output. 0: disabled 1: enabled" ::= { dts4210OutLineE1Entry 2 } dts4210OutLineE1Port OBJECT-TYPE SYNTAX INTEGER { unbalanced (0), balanced (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Output port selection. 0: unbalanced port (BNC) 1: balanced port (RJ48)" ::= { dts4210OutLineE1Entry 3 } dts4210OutLineE1Framing OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "E1 Framing mode. 0: disabled 1: enabled" ::= { dts4210OutLineE1Entry 4 } dts4210OutLineE1CRC OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "CRC mode for E1 Framing. 0: disabled 1: enabled" ::= { dts4210OutLineE1Entry 5 } dts4210OutLineE1MaxOffset OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Max E1 offset to generate an alarm. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_E1_MAX_OFFSET, 4, VARTYPE_DWORD" ::= { dts4210OutputLinesE1 10 } dts4210OutLineE1QLOption OBJECT-TYPE SYNTAX INTEGER { qloptionone (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "E1 quality option (only Option I supported)" REFERENCE "OFS_E1_OPTION, 1, VARTYPE_BYTE" ::= { dts4210OutputLinesE1 11 } dts4210OutLineE1ConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "E1 output configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_E1_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210OutputLinesE1 100 } dts4210OutLineE1ConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_E1_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210OutputLinesE1 101 } -- ----------------------------------------------------------------- -- -- Output lines - Timezone server -- ----------------------------------------------------------------- -- dts4210OutLineTZServer OBJECT IDENTIFIER ::= { dts4210OutputLines 6 } dts4210OutLineTZServerMode OBJECT-TYPE SYNTAX INTEGER { disabled (0), sendNTPMulticast (1), sendNTPAndTimeZoneMulticast (2), sentTimeZoneMulticast (3), answerTimeZoneOnRequest (4), sendEmptyTimeZoneOnce (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the timezone server output. 0: disabled 1: send NTP multicast 2: send NTP and time zone table multicast 3: send time zone table multicast 4: answer timezone on request 5: send empty time zone table once" REFERENCE "OFS_TZSERVER_MODE, 1, VARTYPE_BYTE" ::= { dts4210OutLineTZServer 1 } dts4210OutLineTZServerMCastAddr OBJECT-TYPE SYNTAX DTSNetworkName MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 multicast address (xxx.xxx.xxx.xxx) to send out timezone information." REFERENCE "OFS_TZSERVER_MCAST_IP, 63, VARTYPE_STRING" ::= { dts4210OutLineTZServer 2 } dts4210OutLineTZServerMCastPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 multicast port (1..65535) to send out timezone information." REFERENCE "OFS_TZSERVER_MCAST_PORT, 4, VARTYPE_DWORD" ::= { dts4210OutLineTZServer 3 } dts4210OutLineTZServerNTPInterval OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Send interval of the NTP time information for the timezone server. Interval = 2 power of value (2^value) E.g. Value = 4 --> Interval = 16 seconds" REFERENCE "OFS_TZSERVER_POLL, 1, VARTYPE_BYTE" ::= { dts4210OutLineTZServer 4 } dts4210OutLineTZServerTTL OBJECT-TYPE SYNTAX Unsigned32 (1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast time to live value. Range: 1..64" REFERENCE "OFS_TZSERVER_TTL, 1, VARTYPE_BYTE" ::= { dts4210OutLineTZServer 5 } dts4210OutLineTZServerTableInterval OBJECT-TYPE SYNTAX Unsigned32 (10..86400) UNITS "seconds [s]" MAX-ACCESS read-write STATUS current DESCRIPTION "Send interval (repetition time) of the timezone table. Interval in seconds" REFERENCE "OFS_TZSERVER_TOTABLE, 4, VARTYPE_DWORD" ::= { dts4210OutLineTZServer 6 } dts4210OutLineTZServerEntryInterval OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds [s]" MAX-ACCESS read-write STATUS current DESCRIPTION "Send interval (iteration time) of the timezone entries of the timezone table. Interval in seconds" REFERENCE "OFS_TZSERVER_TOENTRY, 1, VARTYPE_BYTE" ::= { dts4210OutLineTZServer 7 } dts4210OutLineTZServerTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4210OutLineTZServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Timezone server table. 15 entries with the index of the timezone master table or user table." REFERENCE "OFS_TZSERVER_TZTABLE, 1, 15, 2, 2, {{1,VARTYPE_BYTEARR}, {1, VARTYPE_BYTE}}" ::= { dts4210OutLineTZServer 8 } dts4210OutLineTZServerEntry OBJECT-TYPE SYNTAX Dts4210OutLineTZServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the timezone table. The index number is only virtual and not accessible." INDEX { dts4210OutLineTZTableIndex } ::= { dts4210OutLineTZServerTable 1 } Dts4210OutLineTZServerEntry ::= SEQUENCE { dts4210OutLineTZTableIndex Integer32, dts4210OutLineTZTableEntryNumber Integer32 } dts4210OutLineTZTableIndex OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the timezone server table (only virtual). Valid index = 1 .. 15" ::= { dts4210OutLineTZServerEntry 1 } dts4210OutLineTZTableEntryNumber OBJECT-TYPE SYNTAX Integer32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Time zone for user timezone table entry 0: UTC 1-99: See user manual 800870, time zone table" ::= { dts4210OutLineTZServerEntry 2 } dts4210OutLineTZServerConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Timezone table server output configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_TZSERVER_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210OutLineTZServer 100 } dts4210OutLineTZServerConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_TZSERVER_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210OutLineTZServer 101 } -- ----------------------------------------------------------------- -- -- Alarm relay -- ----------------------------------------------------------------- -- dts4210AlarmRelayConfig OBJECT IDENTIFIER ::= { dts4210MIB 6 } dts4210RelayAlarmMask OBJECT-TYPE SYNTAX DTSAlarm64 (SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm bit mask for the relay output. Relay output = (Alarms & Alarmmask) > 0" REFERENCE "OFS_AL_RELAY_MASK, 8, VARTYPE_BYTEARR" ::= { dts4210AlarmRelayConfig 1 } dts4210RelayConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm relay configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_AL_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210AlarmRelayConfig 100 } dts4210RelayConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_AL_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210AlarmRelayConfig 101 } -- ----------------------------------------------------------------- -- -- Alarm mail configuration -- ----------------------------------------------------------------- -- dts4210AlarmMailConfig OBJECT IDENTIFIER ::= { dts4210MIB 7 } dts4210MailMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "Mode of the mail operation. 0: disabled 1: enabled" REFERENCE "OFS_MAIL_MODE, 1, VARTYPE_BYTE" ::= { dts4210AlarmMailConfig 1 } dts4210MailAlarmMask OBJECT-TYPE SYNTAX DTSAlarm64 (SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm bit mask to send mail alarm messages. Alarm mail = (Alarms & Alarmmask) > 0" REFERENCE "OFS_MAIL_MASK, 8, VARTYPE_BYTEARR" ::= { dts4210AlarmMailConfig 2 } dts4210MailServerAddress OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) or fully qualified domain name of the mail server." REFERENCE "OFS_MAIL_SERVER, 64, VARTYPE_STRING" ::= { dts4210AlarmMailConfig 3 } dts4210MailServerPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network port of the mail server." REFERENCE "OFS_MAIL_PORT, 4, VARTYPE_DWORD" ::= { dts4210AlarmMailConfig 4 } dts4210MailAddrDestination1 OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Mail destination address 1. Format: sample@test.com" REFERENCE "OFS_MAIL_DEST1, 64, VARTYPE_STRING" ::= { dts4210AlarmMailConfig 5 } dts4210MailAddrDestination2 OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Mail destination address 2. Format: sample@test.com" REFERENCE "OFS_MAIL_DEST2, 64, VARTYPE_STRING" ::= { dts4210AlarmMailConfig 6 } dts4210MailAddrReply OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Mail reply address. Is used to define the reply address for the recipient. Format: sample@test.com" REFERENCE "OFS_MAIL_REPLY, 64, VARTYPE_STRING" ::= { dts4210AlarmMailConfig 7 } dts4210MailAddrFrom OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Mail sender (from) address. Is normally used to authenticate the sender on the mail server. Format: sample@test.com" REFERENCE "OFS_MAIL_FROM, 64, VARTYPE_STRING" ::= { dts4210AlarmMailConfig 8 } dts4210MailUser OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "User name mail account. Is used to authenticate the sender on the mail server." REFERENCE "OFS_MAIL_USER, 64, VARTYPE_STRING" ::= { dts4210AlarmMailConfig 9 } dts4210MailPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password mail account. Is used to authenticate the sender on the mail server." REFERENCE "OFS_MAIL_PASSWORD, 64, VARTYPE_STRING" ::= { dts4210AlarmMailConfig 10 } dts4210MailAuthMode OBJECT-TYPE SYNTAX INTEGER { off (0), auto (1), plain (2), login (3), cramMD5 (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mode of the mail authentication. 0: Off (mail sender address used) 1: Auto (CRAM-MD5,LOGIN,PLAIN) 2: Plain 3: Login 4: CRAM-MD5" REFERENCE "OFS_MAIL_AUTHMODE, 1, VARTYPE_BYTE" ::= { dts4210AlarmMailConfig 11 } dts4210MailConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm mail configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_MAIL_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210AlarmMailConfig 100 } dts4210MailConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_MAIL_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210AlarmMailConfig 101 } -- ----------------------------------------------------------------- -- -- SNMP configuration -- ----------------------------------------------------------------- -- dts4210SnmpConfig OBJECT IDENTIFIER ::= { dts4210MIB 8 } dts4210SnmpMode OBJECT-TYPE SYNTAX INTEGER { snmpDisabled (0), snmpV1V2cV3 (1), snmpV2cV3 (2), snmpV3 (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mode of the SNMP operation. 0: disabled 1: SNMP version V1, V2c and V3 2: SNMP version V2c and V3 3: SNMP version V3 only" REFERENCE "OFS_SNMP_MODE, 1, VARTYPE_BYTE" ::= { dts4210SnmpConfig 1 } dts4210SnmpAlarmMask OBJECT-TYPE SYNTAX DTSAlarm64 (SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm bit mask to define the visible alarms by SNMP management system. Alarm status = (Alarms & Alarmmask) > 0" REFERENCE "OFS_SNMP_MASK, 8, VARTYPE_BYTEARR" ::= { dts4210SnmpConfig 2 } dts4210SnmpROCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Read only community string." REFERENCE "OFS_SNMPV12C_ROCOMM, 40, VARTYPE_STRING" ::= { dts4210SnmpConfig 3 } dts4210SnmpRWCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Read / write community string." REFERENCE "OFS_SNMPV12C_RWCOMM, 40, VARTYPE_STRING" ::= { dts4210SnmpConfig 4 } dts4210SnmpTrapMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "Mode of the SNMP notification operation. 0: disabled 1: enabled" REFERENCE "OFS_TRAP_MODE, 1, VARTYPE_BYTE" ::= { dts4210SnmpConfig 5 } dts4210SnmpTrapAlarmMask OBJECT-TYPE SYNTAX DTSAlarm64 (SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm bit mask to send snmp alarm messages. Alarm notification = (Alarms & Alarmmask) > 0" REFERENCE "OFS_TRAP_MASK, 8, VARTYPE_BYTEARR" ::= { dts4210SnmpConfig 6 } dts4210SnmpTrapCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Trap community string." REFERENCE "OFS_TRAP_COMM, 40, VARTYPE_STRING" ::= { dts4210SnmpConfig 7 } dts4210SnmpTrapListenerIPAddress1 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) or fully qualified domain name of the notification listener station." REFERENCE "OFS_TRAP_SERVER1, 64, VARTYPE_STRING" ::= { dts4210SnmpConfig 8 } dts4210SnmpTrapListenerPort1 OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network port of the notification listener station." REFERENCE "OFS_TRAP_PORT1, 2, VARTYPE_WORD" ::= { dts4210SnmpConfig 9 } dts4210SnmpTrapVersion1 OBJECT-TYPE SYNTAX INTEGER { version1 (1), version2c (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Version of the snmp trap/notification for trap destination 1. 1: SNMP Version 1 2: SNMP Version 2c" REFERENCE "OFS_TRAP_VERSION1, 1, VARTYPE_BYTE" ::= { dts4210SnmpConfig 10 } dts4210SnmpTrapListenerIPAddress2 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) or fully qualified domain name of the trap listener station." REFERENCE "OFS_TRAP_SERVER2, 64, VARTYPE_STRING" ::= { dts4210SnmpConfig 11 } dts4210SnmpTrapListenerPort2 OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network port of the trap listener station." REFERENCE "OFS_TRAP_PORT2, 2, VARTYPE_WORD" ::= { dts4210SnmpConfig 12 } dts4210SnmpTrapVersion2 OBJECT-TYPE SYNTAX INTEGER { version1 (1), version2c (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Version of the snmp trap/notification for trap destination 2. 1: SNMP Version 1 2: SNMP Version 2c" REFERENCE "OFS_TRAP_VERSION2, 1, VARTYPE_BYTE" ::= { dts4210SnmpConfig 13 } dts4210SnmpTrapAliveMsgInterval OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..7200) UNITS "seconds (s)" MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval to send the alive message to the trap listener stations. 0: Alive message disabled >0: Alive message enabled, Range: 1 ... 7200 seconds" REFERENCE "OFS_TRAP_ALIVE_TO, 4, VARTYPE_DWORD" ::= { dts4210SnmpConfig 14 } dts4210SnmpLocation OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Location string" REFERENCE "OFS_SNMP_LOCATION, 40, VARTYPE_STRING" ::= { dts4210SnmpConfig 15 } dts4210SnmpContact OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Contact string" REFERENCE "OFS_SNMP_CONTACT, 40, VARTYPE_STRING" ::= { dts4210SnmpConfig 16 } -- ----------------------------------------------------------------- -- -- SNMP configuration - SNMPv3 -- ----------------------------------------------------------------- -- dts4210SnmpV3 OBJECT IDENTIFIER ::= { dts4210SnmpConfig 30 } dts4210SnmpV3UserPassword1 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User password string." REFERENCE "OFS_SNMPV3_USERPW1, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 1 } dts4210SnmpV3UserLevel1 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User access level" REFERENCE "OFS_SNMPV3_USERLEVEL1, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 2 } dts4210SnmpV3UserRead1 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User access level" REFERENCE "OFS_SNMPV3_USERREAD1, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 3 } dts4210SnmpV3UserWrite1 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User access level" REFERENCE "OFS_SNMPV3_USERWRITE1, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 4 } dts4210SnmpV3UserPassword2 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User password string." REFERENCE "OFS_SNMPV3_USERPW2, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 5 } dts4210SnmpV3UserLevel2 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User access level" REFERENCE "OFS_SNMPV3_USERLEVEL2, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 6 } dts4210SnmpV3UserRead2 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User access level" REFERENCE "OFS_SNMPV3_USERREAD2, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 7 } dts4210SnmpV3UserWrite2 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User access level" REFERENCE "OFS_SNMPV3_USERWRITE2, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 8 } dts4210SnmpV3View11 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 1" REFERENCE "OFS_SNMPV3_VIEW1_1, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 11 } dts4210SnmpV3View12 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 1" REFERENCE "OFS_SNMPV3_VIEW1_2, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 12 } dts4210SnmpV3View13 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 1" REFERENCE "OFS_SNMPV3_VIEW1_3, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 13 } dts4210SnmpV3View14 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 1" REFERENCE "OFS_SNMPV3_VIEW1_4, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 14 } dts4210SnmpV3View15 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 1" REFERENCE "OFS_SNMPV3_VIEW1_5, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 15 } dts4210SnmpV3View16 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 1" REFERENCE "OFS_SNMPV3_VIEW1_6, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 16 } dts4210SnmpV3View21 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 2" REFERENCE "OFS_SNMPV3_VIEW2_1, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 21 } dts4210SnmpV3View22 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 2" REFERENCE "OFS_SNMPV3_VIEW2_2, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 22 } dts4210SnmpV3View23 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 2" REFERENCE "OFS_SNMPV3_VIEW2_3, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 23 } dts4210SnmpV3View24 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 2" REFERENCE "OFS_SNMPV3_VIEW2_4, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 24 } dts4210SnmpV3View25 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 2" REFERENCE "OFS_SNMPV3_VIEW2_5, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 25 } dts4210SnmpV3View26 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 2" REFERENCE "OFS_SNMPV3_VIEW2_6, 40, VARTYPE_STRING" ::= { dts4210SnmpV3 26 } dts4210SnmpV3ConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP v3 configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_SNMPV3_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210SnmpV3 100 } dts4210SnmpV3ConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_SNMPV3_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210SnmpV3 101 } dts4210SnmpConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_SNMP_CHANGED, 1, VARTYPE_BYTE" ::= { dts4210SnmpConfig 100 } dts4210SnmpConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_SNMP_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4210SnmpConfig 101 } -- ----------------------------------------------------------------- -- -- SNMP configuration - Current alarm information -- ----------------------------------------------------------------- -- dts4210SnmpCurrentAlarmInfo OBJECT IDENTIFIER ::= { dts4210SnmpConfig 1000 } dts4210TrapAlMsgErrorNr OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "Error number of the trap message." REFERENCE "OFS_TRAP_ERRORNBR, 1, VARTYPE_BYTE" ::= { dts4210SnmpCurrentAlarmInfo 1 } dts4210TrapAlMsgErrorState OBJECT-TYPE SYNTAX INTEGER { off (0), on (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Error state of the trap message." REFERENCE "OFS_TRAP_ERRORSTATE, 1, VARTYPE_BYTE" ::= { dts4210SnmpCurrentAlarmInfo 2 } dts4210TrapAlMsgErrorTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "Seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Error time of the trap message. Seconds since 1.1.1970 00:00:00" REFERENCE "OFS_TRAP_ERRORTIME, 4, VARTYPE_DWORD" ::= { dts4210SnmpCurrentAlarmInfo 3 } dts4210TrapAlMsgErrorText OBJECT-TYPE SYNTAX DisplayString (SIZE(1..59)) MAX-ACCESS read-only STATUS current DESCRIPTION "Error text of the trap message." REFERENCE "OFS_TRAP_MESSAGE, 60, VARTYPE_STRING" ::= { dts4210SnmpCurrentAlarmInfo 4 } -- ----------------------------------------------------------------- -- -- MIBv3 conformance -- ----------------------------------------------------------------- -- dts4210MIBConformance OBJECT IDENTIFIER ::= { dts4210MIB 14210 } dts4210MIBMIBCompliances OBJECT IDENTIFIER ::= { dts4210MIBConformance 1 } dts4210MIBGroups OBJECT IDENTIFIER ::= { dts4210MIBConformance 2 } -- compliance statements dts4210MIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for DTS 4210." MODULE -- this module MANDATORY-GROUPS { dts4210AllNotifications, dts4210AllObjects } ::= { dts4210MIBMIBCompliances 1 } dts4210AllNotifications NOTIFICATION-GROUP NOTIFICATIONS { dts4210StartUp, dts4210Shutdown, dts4210Alarm, dts4210StatusChanged, dts4210ConfigChanged, dts4210Alive } STATUS current DESCRIPTION "This automatically created notification group contains all notifications that do not belong to any other NOTIFICATION-GROUP" ::= { dts4210MIBGroups 1 } dts4210AllObjects OBJECT-GROUP OBJECTS { dts4210SysStatus, dts4210SysAlarms, dts4210Language, dts4210Timezone, dts4210Password, dts4210PowerSupply, dts4210USBPort, dts4210NetInfoPortStatus, dts4210NetInfoPortLink, dts4210NetInfoPortMAC, dts4210NetInfoPortIP1v4, dts4210NetInfoPortSubnet1v4, dts4210NetInfoPortGW1v4, dts4210NetInfoPortIP2v4, dts4210NetInfoPortSubnet2v4, dts4210NetInfoPortGW2v4, dts4210NetInfoPortDNSv4, dts4210NetInfoPortHostname, dts4210NetInfoPortDomain, dts4210NetInfoPortDHCPMode, dts4210NetInfoPortIPv6linklocal, dts4210NetInfoPortIP1v6, dts4210NetInfoPortIP2v6, dts4210NetInfoPortIPGWv6, dts4210NetInfoPortVLANid1, dts4210NetInfoPortVLANid2, dts4210NetInfoPortVLANPCP1, dts4210NetInfoPortVLANPCP2, dts4210NetInfoPortLAGStatus, dts4210NetInfoPortPTPConfig, dts4210NetInfoPortSyncE, dts4210NetInfoLAGIfStatus, dts4210NetInfoLAGIfPollIntervall, dts4210NetInfoLAGIfLACPRate, dts4210NetInfoLAGIfMinLinks, dts4210NetInfoLAGIfAggregatorID, dts4210NetInfoLAGIfAggregatorNrActivePorts, dts4210NetInfoLAGIfAggregatorActorKey, dts4210NetInfoLAGIfPartnerMACAddress, dts4210NetInfoLAGIfSlave1Status, dts4210NetInfoLAGIfSlave1LinkSpeed, dts4210NetInfoLAGIfSlave1LinkDuplex, dts4210NetInfoLAGIfSlave1LinkFailureCount, dts4210NetInfoLAGIfSlave2Status, dts4210NetInfoLAGIfSlave2LinkSpeed, dts4210NetInfoLAGIfSlave2LinkDuplex, dts4210NetInfoLAGIfSlave2LinkFailureCount, dts4210TimeInfoStratum, dts4210TimeInfoLastDrift, dts4210TimeInfoLastQCorr, dts4210TimeInfoTimeSource, dts4210TimeInfoSourceQuality, dts4210TimeInfoSourceOffsetNSec, dts4210TimeInfoLastTime, dts4210TimeInfoSourceJitter, dts4210TimeInfoLeapSecStatus, dts4210TimeInfoLeapSecDate, dts4210TimeInfoLeapSecDir, dts4210TimeInfoLeapSecSource, dts4210TimeInfoLeapSecLastDate, dts4210TimeInfoLeapSecLastDir, dts4210GNSSTimeInfoGNSSState, dts4210GNSSTimeInfoLastTime, dts4210GNSSTimeInfoOffsetSec, dts4210GNSSTimeInfoOffsetNSec, dts4210GNSSTimeInfoValidity, dts4210GNSSTimeInfoSVCount, dts4210GNSSTimeInfoTDOP, dts4210GNSSTimeInfoInternalAccuracy, dts4210GNSSTimeInfoSurveyInMode, dts4210GNSSTimeInfoSurveyInStatus, dts4210GNSSTimeInfoPositionLatitude, dts4210GNSSTimeInfoPositionLongitude, dts4210GNSSTimeInfoPositionHeightAboveSea, dts4210GNSSTimeInfoAntennaDelay, dts4210GNSSTimeInfoFixType, dts4210GNSSTimeInfoLeapSecStatus, dts4210GNSSTimeInfoLeapSecDate, dts4210GNSSTimeInfoLeapSecDir, dts4210GNSSTimeInfoJammingState, dts4210GNSSTimeInfoJammingIndicator, dts4210GNSSTimeInfoAGCMonitor, dts4210GNSSTimeInfoNoisePerMS, dts4210GNSSTimeInfoConfigured, dts4210GNSSTimeInfoPriority, dts4210GNSSTimeInfoState, dts4210GNSSTimeInfoDeviation, dts4210GNSSTimeInfoRating, dts4210RedLinkTimeInfoLinkState, dts4210RedLinkTimeInfoLeapSecStatus, dts4210RedLinkTimeInfoLeapSecDate, dts4210RedLinkTimeInfoLeapSecDir, dts4210RedLinkTimeInfoConfigured, dts4210RedLinkTimeInfoPriority, dts4210RedLinkTimeInfoState, dts4210RedLinkTimeInfoLastTime, dts4210RedLinkTimeInfoOffsetSec, dts4210RedLinkTimeInfoOffsetNSec, dts4210RedLinkTimeInfoDeviation, dts4210RedLinkTimeInfoRating, dts4210PTPTimeInfoLeapSecStatus, dts4210PTPTimeInfoLeapSecDate, dts4210PTPTimeInfoLeapSecDir, dts4210PTPTimeInfoConfigured, dts4210PTPTimeInfoPriority, dts4210PTPTimeInfoState, dts4210PTPTimeInfoLastTime, dts4210PTPTimeInfoOffsetSec, dts4210PTPTimeInfoOffsetNSec, dts4210PTPTimeInfoDeviation, dts4210PTPTimeInfoRating, dts4210DCFTimeInfoSatNbr, dts4210DCFTimeInfoSecCount, dts4210DCFTimeInfoConfigured, dts4210DCFTimeInfoPriority, dts4210DCFTimeInfoState, dts4210DCFTimeInfoLeapSecStatus, dts4210DCFTimeInfoLeapSecDate, dts4210DCFTimeInfoLeapSecDir, dts4210DCFTimeInfoLastTime, dts4210DCFTimeInfoOffsetSec, dts4210DCFTimeInfoOffsetNSec, dts4210DCFTimeInfoDeviation, dts4210DCFTimeInfoRating, dts4210E1TimeInfoQualityLevel, dts4210E1TimeInfoLastTime, dts4210E1TimeInfoConfigured, dts4210E1TimeInfoPriority, dts4210E1TimeInfoState, dts4210E1TimeInfoLastTime, dts4210E1TimeInfoOffsetSec, dts4210E1TimeInfoOffsetNSec, dts4210E1TimeInfoDeviation, dts4210E1TimeInfoRating, dts4210FINTimeInfoLastTime, dts4210FINTimeInfoConfigured, dts4210FINTimeInfoPriority, dts4210FINTimeInfoState, dts4210FINTimeInfoLastTime, dts4210FINTimeInfoOffsetSec, dts4210FINTimeInfoOffsetNSec, dts4210FINTimeInfoDeviation, dts4210FINTimeInfoRating, dts4210NTPTimeInfoCurrentSource, dts4210NTPTimeInfoSystemOffset, dts4210NTPTimeInfoSourceJitter, dts4210NTPTimeInfoStratum, dts4210NTPTimeInfoFrequency, dts4210NTPTInfoReachable, dts4210OscTimeInfoLockedState, dts4210OscTimeInfoPLLState, dts4210OscTimeInfoPPSTrackingState, dts4210SupplyVoltage1, dts4210SupplyVoltage2, dts4210SysUpdateCmd, dts4210SysBackupCmd, dts4210SysRestoreCmd, dts4210SysRestartCmd, dts4210SysDefaultCmd, dts4210SysAllChanged, dts4210SysCopyFiles, dts4210verFPGA, dts4210verFPGADriver, dts4210verModule, dts4210verLangResource, dts4210verTimezoneTable, dts4210verNTP, dts4210verLinux, dts4210verCLIShell, dts4210verRootFS, dts4210verSNMPMasterAgent, dts4210verSNMPSubAgent, dts4210verApplication, dts4210verPTP4L, dts4210ProdInfoHWCode, dts4210ProdInfoHWName, dts4210ProdInfoHWRevision, dts4210ProdInfoProdNo, dts4210ProdInfoArticleNo, dts4210ProdInfoFirmwareVer, dts4210SysConfigCmd, dts4210SysConfigChangedTime, dts4210NetworkPortLinkMode, dts4210NetworkPortPTPSupport, dts4210NetworkPortPTPConfig, dts4210NetworkPortLAGSupport, dts4210NetworkPortLAGConfig, dts4210NetworkPortSyncESupport, dts4210NetworkPortSyncEConfig, dts4210NetworkPortCfgChanged, dts4210NetworkPortConfigCmd, dts4210NetworkPortConfigChangedTime, dts4210NetworkLAGIFMode, dts4210NetworkLAGIFLACPRate, dts4210NetworkLAGIFMiiMon, dts4210NetworkLAGIFCfgChanged, dts4210NetworkLAGIFConfigCmd, dts4210NetworkLAGIFConfigChangedTime, dts4210NetworkIPCfgMode, dts4210NetworkIPCfgIP1v4, dts4210NetworkIPCfgIPMask1v4, dts4210NetworkIPCfgIPGateway1v4, dts4210NetworkIPCfgIP2v4, dts4210NetworkIPCfgIPMask2v4, dts4210NetworkIPCfgIPGateway2v4, dts4210NetworkIPCfgDHCPMode, dts4210NetworkIPCfgHostname, dts4210NetworkIPCfgDomain, dts4210NetworkIPCfgIPNameserver, dts4210NetworkIPCfgIPv6AutoConf, dts4210NetworkIPCfgIPv6DHCPMode, dts4210NetworkIPCfgIPv6Addr1, dts4210NetworkIPCfgIPv6Prefix1, dts4210NetworkIPCfgIPv6Addr2, dts4210NetworkIPCfgIPv6Prefix2, dts4210NetworkIPCfgIPv6Gateway1, dts4210NetworkIPCfgIPv6Gateway2, dts4210NetworkIPCfgIPv6Nameserver, dts4210NetworkIPCfgVLANMember1, dts4210NetworkIPCfgVLANMember2, dts4210NetworkIPCfgIP1v4RouteDest1, dts4210NetworkIPCfgIP1v4RoutePrefix1, dts4210NetworkIPCfgIP1v4RouteDest2, dts4210NetworkIPCfgIP1v4RoutePrefix2, dts4210NetworkIPCfgIP2v4RouteDest1, dts4210NetworkIPCfgIP2v4RoutePrefix1, dts4210NetworkIPCfgIP2v4RouteDest2, dts4210NetworkIPCfgIP2v4RoutePrefix2, dts4210NetworkIPCfgChanged, dts4210NetworkIPCfgConfigCmd, dts4210NetworkIPCfgConfigChangedTime, dts4210NetworkVLANCfgName, dts4210NetworkVLANCfgID, dts4210NetworkVLANQosBK, dts4210NetworkVLANQosBE, dts4210NetworkVLANQosEE, dts4210NetworkVLANQosCA, dts4210NetworkVLANQosVI, dts4210NetworkVLANQosVO, dts4210NetworkVLANQosIC, dts4210NetworkVLANQosNC, dts4210NetworkVLANQosPCP, dts4210NetworkVLANCfgChanged, dts4210NetworkVLANConfigCmd, dts4210NetworkVLANConfigChangedTime, dts4210TelnetMode, dts4210FTPMode, dts4210SSHMode, dts4210NetServicesConfigCmd, dts4210NetServicesConfigChangedTime, dts4210TSConfigChangedTime, dts4210TimeSourcePriorityType, dts4210TimeSourcePriorityAcc, dts4210TimeSourcePriorityMode, dts4210TSTimezone, dts4210TSStratumMode, dts4210TSStratumErrorLimit, dts4210TSTimeout, dts4210TSStratumTimeout1, dts4210TSOffsetPerStratum, dts4210TSStratumChangeSourceFail, dts4210TSMaxOffsetForTimeValid, dts4210TSAdjustmentMode, dts4210TSMaxAdjusmentSpeed, dts4210TSOffsetSynchOnly, dts4210TSLeapSecMode, dts4210TSLeapSecDate, dts4210TSRTCMode, dts4210TSAlarmBigOffset, dts4210TSConfigCmd, dts4210RedundantLinkMaxOffsetSlaveTimeSource, dts4210RedundantLinkConfigCmd, dts4210RedundantLinkConfigChangedTime, dts4210RedundantLinkManualMasterCmd, dts4210NTPKeyFileCmd, dts4210NTPKeyTrusted, dts4210NTPKeyRequest, dts4210NTPKeyControl, dts4210NTPKeyGeneratorCmd, dts4210NTPAutokeyPassword, dts4210NTPAccessControl, dts4210NTPConfigCmd, dts4210NTPConfigChangedTime, dts4210ManualTimeSetUTC, dts4210ManualTimeSetDiff, dts4210ManualTimeCmd, dts4210PTPMode, dts4210PTPProfile, dts4210PTPDelayMechanism, dts4210PTPTranspProto, dts4210PTPIPv6Scope, dts4210PTPPriority1, dts4210PTPPriority2, dts4210PTPDomain, dts4210PTPAnnounceInterval, dts4210PTPSyncInterval, dts4210PTPAnnounceTO, dts4210PTPSyncReceiptTO, dts4210PTPDelayRequestInterval, dts4210PTPUDPTTL, dts4210PTPUnicastMasterOnly, dts4210PTPUnicastRequestDuration, dts4210PTPUnicastLocalPriority, dts4210PTPQueryInterval, dts4210PTPPowerGmID, dts4210PTPPowerAltTimeOfs, dts4210PTPTAIUTCOffset, dts4210PTPSlaveInterface, dts4210PTPSlaveMaxOffset, dts4210PTPSlaveUnicastMasterAddr, dts4210PTPConfigCmd, dts4210PTPConfigChangedTime, dts4210GNSSConstellationMode, dts4210GNSSMaxOffset, dts4210GNSSSurveyInMode, dts4210GNSSSurveyInObservationTime, dts4210GNSSSurveyInObservationAccuracy, dts4210GNSSSurveyInCommand, dts4210GNSSAntennaSupply, dts4210GNSSAntennaDelay, dts4210GNSSSensSVCount, dts4210GNSSSensSVSigLevel, dts4210GNSSConfigCmd, dts4210GNSSConfigChangedTime, dts4210DCFOffsetCorrection, dts4210DCFMaxOffset, dts4210DCFINConfigCmd, dts4210DCFINConfigChangedTime, dts4210FINMode, dts4210FINMaxOffset, dts4210FINConfigCmd, dts4210FINConfigChangedTime, dts4210OutMainDCFConfigChangedTime, dts4210OutMainDCFMode, dts4210OutMainDCFTimezone, dts4210OutMainDCFConfigCmd, dts4210OutLinePulseFREQMode, dts4210OutLinePulseFREQConfigCmd, dts4210OutLinePulseFREQConfigChangedTime, dts4210OutLineIRIGMode, dts4210OutLineIRIGTimezone, dts4210OutLineIRIGOutputLevel, dts4210OutLineIRIGConfigCmd, dts4210OutLineIRIGConfigChangedTime, dts4210OutLineE1Mode, dts4210OutLineE1Port, dts4210OutLineE1Framing, dts4210OutLineE1CRC, dts4210OutLineE1MaxOffset, dts4210OutLineE1QLOption, dts4210OutLineE1ConfigCmd, dts4210OutLineE1ConfigChangedTime, dts4210OutLineTZServerMode, dts4210OutLineTZServerMCastAddr, dts4210OutLineTZServerMCastPort, dts4210OutLineTZServerNTPInterval, dts4210OutLineTZServerTTL, dts4210OutLineTZServerTableInterval, dts4210OutLineTZServerEntryInterval, dts4210OutLineTZServerConfigCmd, dts4210OutLineTZServerConfigChangedTime, dts4210OutLineSerialMode, dts4210OutLineSerialTimezone, dts4210OutLineSerialComMode, dts4210OutLineSerialComParam, dts4210OutLineSerialTeleFile, dts4210OutLineSerialConfigCmd, dts4210OutLineSerialConfigChangedTime, dts4210RelayAlarmMask, dts4210RelayConfigCmd, dts4210RelayConfigChangedTime, dts4210MailMode, dts4210MailAlarmMask, dts4210MailServerAddress, dts4210MailServerPort, dts4210MailAddrDestination1, dts4210MailAddrDestination2, dts4210MailAddrReply, dts4210MailAddrFrom, dts4210MailUser, dts4210MailPassword, dts4210MailAuthMode, dts4210MailConfigCmd, dts4210MailConfigChangedTime, dts4210SnmpMode, dts4210SnmpAlarmMask, dts4210SnmpROCommunity, dts4210SnmpRWCommunity, dts4210SnmpTrapMode, dts4210SnmpTrapAlarmMask, dts4210SnmpTrapCommunity, dts4210SnmpTrapListenerIPAddress1, dts4210SnmpTrapListenerPort1, dts4210SnmpTrapVersion1, dts4210SnmpTrapListenerIPAddress2, dts4210SnmpTrapListenerPort2, dts4210SnmpTrapVersion2, dts4210SnmpTrapAliveMsgInterval, dts4210SnmpLocation, dts4210SnmpContact, dts4210SnmpV3UserPassword1, dts4210SnmpV3UserLevel1, dts4210SnmpV3UserRead1, dts4210SnmpV3UserWrite1, dts4210SnmpV3UserPassword2, dts4210SnmpV3UserLevel2, dts4210SnmpV3UserRead2, dts4210SnmpV3UserWrite2, dts4210SnmpV3View11, dts4210SnmpV3View12, dts4210SnmpV3View13, dts4210SnmpV3View14, dts4210SnmpV3View15, dts4210SnmpV3View16, dts4210SnmpV3View21, dts4210SnmpV3View22, dts4210SnmpV3View23, dts4210SnmpV3View24, dts4210SnmpV3View25, dts4210SnmpV3View26, dts4210SnmpV3ConfigChangedTime, dts4210SnmpV3ConfigCmd, dts4210SnmpConfigCmd, dts4210SnmpConfigChangedTime, dts4210TrapAlMsgErrorNr, dts4210TrapAlMsgErrorState, dts4210TrapAlMsgErrorTime, dts4210TrapAlMsgErrorText, dts4210NTPBroadcastAddr, dts4210NTPBrodcastInterval, dts4210NTPBroadcastTTL, dts4210NTPBroadcastKey, dts4210OutLineTZTableEntryNumber } STATUS current DESCRIPTION "This automatically created object group contains all those objects that do not belong to any other OBJECT-GROUP" ::= { dts4210MIBGroups 2 } dts4210AllObsoleteObjects OBJECT-GROUP OBJECTS { dts4210PTPLeapOffset } STATUS obsolete DESCRIPTION "This automatically created object group contains all those objects that have status obsolete" ::= { dts4210MIBGroups 3 } END