DTS4160 DEFINITIONS ::= BEGIN -- ----------------------------------------------------------------- -- -- Imports -- ----------------------------------------------------------------- -- IMPORTS Integer32, OBJECT-TYPE, MODULE-IDENTITY, Unsigned32, NOTIFICATION-TYPE, TimeTicks, Gauge32 FROM SNMPv2-SMI OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF DisplayString FROM SNMPv2-TC DTSNetworkName, DTSAlarm64, DTSFlags32, EnabledDisabled, dts FROM DTS-COMMON; -- ----------------------------------------------------------------- -- -- MODULE definition -- ----------------------------------------------------------------- -- dts4160MIB MODULE-IDENTITY LAST-UPDATED "202111230741Z" ORGANIZATION "Moser-Baer AG" CONTACT-INFO "Moser-Baer AG support@mobatime.com" DESCRIPTION "This mib definition is used for DTS 4160 devices." REVISION "202111230741Z" DESCRIPTION "Add PTP unicast master table and C37.238 power profiles parameters" REVISION "202105181252Z" DESCRIPTION "Add frequency input named as 'F-In' as time source." REVISION "202103080911Z" DESCRIPTION "Rename DCF-HQ to GNSS-DCF." REVISION "201911010101Z" DESCRIPTION "Changes for latest software." REVISION "201905070621Z" DESCRIPTION "Harmonize time & gnss features with dtsmenu." REVISION "201810190854Z" DESCRIPTION "Additional time source configuration options." REVISION "201806041411Z" DESCRIPTION "Up to 8 VLAN configurations. PTP-Unicast options." REVISION "201711021333Z" DESCRIPTION "Initial version of this module" ::= { dts 4160 } -- ----------------------------------------------------------------- -- -- Traps -- ----------------------------------------------------------------- -- dts4160Traps OBJECT IDENTIFIER ::= { dts4160MIB 0 } dts4160StartUp NOTIFICATION-TYPE STATUS current DESCRIPTION "The DTS subagent has startup." REFERENCE "NOTIFICATION_STARTUP" ::= { dts4160Traps 1 } dts4160Shutdown NOTIFICATION-TYPE STATUS current DESCRIPTION "The DTS subagent is shutdown." REFERENCE "NOTIFICATION_SHUTDOWN" ::= { dts4160Traps 2 } dts4160Alarm NOTIFICATION-TYPE OBJECTS { dts4160TrapAlMsgErrorNr, dts4160TrapAlMsgErrorState, dts4160TrapAlMsgErrorTime, dts4160TrapAlMsgErrorText } STATUS current DESCRIPTION "Alarm notification with attached (binded variables) alarm information. dts4160TrapAlMsgErrorNr, dts4160TrapAlMsgErrorState, dts4160TrapAlMsgErrorTime, dts4160TrapAlMsgErrorText" REFERENCE "NOTIFICATION_ALARM {OFS_TRAP_MODE, 4}, {OFS_TRAP_STATE, 76}" ::= { dts4160Traps 3 } dts4160StatusChanged NOTIFICATION-TYPE OBJECTS { dts4160SysStatus, dts4160TimeInfoSourceOffsetNSec, dts4160TimeInfoStratum, dts4160TimeInfoTimeSource } STATUS current DESCRIPTION "Notification for a status change. Attached are the variables dts4160SysStatus, dts4160TimeInfoSourceOffsetNSec, dts4160TimeInfoStratum, dts4160TimeInfoTimeSource" REFERENCE "NOTIFICATION_STATUS {OFS_DTS_STATE, 4}, {OFS_TINFO_SOURCETYPE, 1}, {OFS_TINFO_STRATUM, 1}" ::= { dts4160Traps 4 } dts4160ConfigChanged NOTIFICATION-TYPE OBJECTS { dts4160SysConfigChangedTime, dts4160NetworkPortConfigChangedTime, dts4160NetworkLAGIFConfigChangedTime, dts4160NetworkIPCfgConfigChangedTime, dts4160NetworkVLANConfigChangedTime, dts4160NetServicesConfigChangedTime, dts4160TSConfigChangedTime, dts4160RedundantLinkConfigChangedTime, dts4160NTPConfigChangedTime, dts4160PTPConfigChangedTime, dts4160GNSSConfigChangedTime, dts4160DCFINConfigChangedTime, dts4160FINConfigChangedTime, dts4160OutMainDCFConfigChangedTime, dts4160OutLinePulseFREQConfigChangedTime, dts4160OutLineSerialConfigChangedTime, dts4160OutLineIRIGConfigChangedTime, dts4160OutLineE1ConfigChangedTime, dts4160OutLineTZServerConfigChangedTime, dts4160RelayConfigChangedTime, dts4160MailConfigChangedTime, dts4160SnmpConfigChangedTime, dts4160SnmpV3ConfigChangedTime } STATUS current DESCRIPTION "Notification of a configuration change. Attached are all changed times of the different configuration sections." REFERENCE "NOTIFICATION_CFGCHANGE {OFS_GEN_UPDATE, 1}, {OFS_SERVICE_UPDATE, 1}, {OFS_TIME_UPDATE, 1}, {OFS_RED_UPDATE, 1}, {OFS_NTP_UPDATE, 1}, {OFS_PTP_UPDATE, 1}, {OFS_GNSS_UPDATE, 1}, {OFS_DCFIN_UPDATE, 1}, {OFS_F_IN_UPDATE, 1}, {OFS_DCF_UPDATE, 1}, {OFS_FREQPULS_UPDATE, 1}, {OFS_SERIAL_UPDATE, 1}, {OFS_IRIG_UPDATE, 1}, {OFS_E1_UPDATE, 1}, {OFS_TZSERVER_UPDATE, 1}, {OFS_AL_UPDATE, 1}, {OFS_MAIL_UPDATE, 1}, {OFS_SNMPV3_UPDATE, 1}, {OFS_SNMP_UPDATE, 1}" ::= { dts4160Traps 5 } dts4160Alive NOTIFICATION-TYPE OBJECTS { dts4160SysStatus, dts4160SysAlarms } STATUS current DESCRIPTION "Device alive notification. Will be send in the configured interval. Attached are the variables dts4160SysStatus and dts4160SysAlarms." REFERENCE "NOTIFICATION_ALIVE {OFS_TRAP_MODE, 4}, {OFS_TRAP_ALIVE_TO, 4}" ::= { dts4160Traps 6 } -- ----------------------------------------------------------------- -- -- System -- ----------------------------------------------------------------- -- dts4160System OBJECT IDENTIFIER ::= { dts4160MIB 1 } dts4160SysStatus OBJECT-TYPE SYNTAX DTSFlags32 MAX-ACCESS read-only STATUS current DESCRIPTION "DTS System status (32bit). Internal state of the DTS application software. Used for maintenance only. Bit 00: DTS configuration ready Bit 01: FPGA is ready Bit 02: FPGA running Bit 03: Reserved Bit 04: Reserved Bit 05: Reserved Bit 06: Reserved Bit 07: Reserved Bit 08: System time set Bit 09: Synchronisation is ok Bit 10: Time shifting in progress Bit 11: Running on NTP as backup Bit 12: Notification of a leap second Bit 13: Oscillator locked Bit 14: Reserved Bit 15: Reserved Bit 16: Master Bit 17: Slave Bit 18: Link ok Bit 19: Reserved Bit 20: Reserved Bit 21: Reserved Bit 22: Reserved Bit 23: Default MAC address Bit 24: Power supply is ok Bit 25: Restarting (never shown) Bit 26: High CPU usage Bit 27: High CPU temperatur Bit 28: High disk usage RamFS Bit 29: High disk usage RootFS Bit 30: High disk usage DTSCfgFS Bit 31: High disk usage DTSAppFS" REFERENCE "OFS_DTS_STATE, 4, VARTYPE_DWORD" ::= { dts4160System 1 } dts4160SysAlarms OBJECT-TYPE SYNTAX DTSAlarm64 (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Alarm state of the DTS 4160 Bit00=DTS restart Bit01=System warning Bit02=Supply voltage too low Bit03=Failure red. supply Bit04=Internal voltage to low Bit05=High offset to GNSS Bit06=High offset to PTP Bit07=High offset to GNSS-DCF Bit08=High offset to FREQ Bit09=High offset to E1 Bit10=PTP synch lost Bit11=GNSS-DCF synch lost Bit12=Frequncy-In synch lost Bit13=E1 synch lost Bit14=GNSS synch lost Bit15=Time source big offset Bit16=Time source fail strat Bit17=Time source fail TO Bit18=No valid time Bit19=NTP synch lost Bit20=High offset to NTP Bit21=NTP failed Bit22=Error bit22 Bit23=No valid timesource Bit24=No mail server Bit25=SNMP not running Bit26=Error bit26 Bit27=Error bit27 Bit28=Error bit28 Bit29=NTP Key Config error Bit30=Error bit30 Bit31=No DTS link Bit32=Change over slave->master Bit33=High offset to master Bit34=Oscillator not locked Bit35=SyncE not running Bit36=PTP not running Bit37=Error bit37 Bit38=Tele.-file invalid serial line 1 Bit39=Wrong time zone serial line 1 Bit40=Tele.-file invalid serial line 2 Bit41=Wrong time zone serial line 2 Bit42=Error bit42 Bit43=Error bit43 Bit44=Error bit44 Bit45=Error bit45 Bit46=Error bit46 Bit47=Error bit47 Bit48=Error bit48 Bit49=Error bit49 Bit50=Error bit50 Bit51=Error bit51 Bit52=Error bit52 Bit53=Error bit53 Bit54=Wrong time zone DCF output 1 Bit55=Error bit55 Bit56=Error bit56 Bit57=Error bit57 Bit58=Wrong time zone DCF Bit59=Error Time Zone TC1 Bit60=Error Time Zone TC2 Bit61=Error bit61 Bit62=Error bit62 Bit63=Error bit63" REFERENCE "OFS_ALSTATE_ALARMS, 8, VARTYPE_BYTEARR" ::= { dts4160System 8 } dts4160Language OBJECT-TYPE SYNTAX INTEGER { english (0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Language of the menu text. 0: English" REFERENCE "OFS_GEN_LANG, 1, VARTYPE_BYTE" ::= { dts4160System 9 } dts4160Timezone OBJECT-TYPE SYNTAX Unsigned32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Time zone for the display and the alarm messages. 0: UTC 1-99: See user manual 800870, time zone table" REFERENCE "OFS_GEN_LOC_TZ, 1, VARTYPE_BYTE" ::= { dts4160System 10 } dts4160Password OBJECT-TYPE SYNTAX DisplayString (SIZE(0..14)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password for the menu and FTP." REFERENCE "OFS_GEN_PASSWORD, 15, VARTYPE_STRING" ::= { dts4160System 11 } dts4160PowerSupply OBJECT-TYPE SYNTAX INTEGER { singleMode (0), redundantMode (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the power supply. 0: single mode 1: redundant mode" REFERENCE "OFS_GEN_POWER, 1, VARTYPE_BYTE" ::= { dts4160System 12 } dts4160USBPort OBJECT-TYPE SYNTAX INTEGER { usbportOFF (0), usbportON (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the USB port. 0: USB port off 1: USB port on" REFERENCE "OFS_GEN_USBPORT, 1, VARTYPE_BYTE" ::= { dts4160System 13 } -- ----------------------------------------------------------------- -- -- System - Network information -- ----------------------------------------------------------------- -- dts4160NetworkInfo OBJECT IDENTIFIER ::= { dts4160System 20 } -- ----------------------------------------------------------------- -- -- System - Network information - Ports -- ----------------------------------------------------------------- -- dts4160NetInfoPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4160NetInfoPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with network interface info" REFERENCE "OFS_NWINFO1_STATUS, 1, 4, 2, 25, {{896,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}, {20,VARTYPE_STRING}, {64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING}, {64,VARTYPE_STRING},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER}, {64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4160NetworkInfo 20} dts4160NetInfoPortEntry OBJECT-TYPE SYNTAX Dts4160NetInfoPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4160NetInfoPortIndex } ::= { dts4160NetInfoPortTable 1 } Dts4160NetInfoPortEntry ::= SEQUENCE { dts4160NetInfoPortIndex Integer32, dts4160NetInfoPortStatus Unsigned32, dts4160NetInfoPortLink Unsigned32, dts4160NetInfoPortMAC DisplayString, dts4160NetInfoPortIP1v4 DTSNetworkName, dts4160NetInfoPortSubnet1v4 DTSNetworkName, dts4160NetInfoPortGW1v4 DTSNetworkName, dts4160NetInfoPortIP2v4 DTSNetworkName, dts4160NetInfoPortSubnet2v4 DTSNetworkName, dts4160NetInfoPortGW2v4 DTSNetworkName, dts4160NetInfoPortDNSv4 DTSNetworkName, dts4160NetInfoPortHostname DisplayString, dts4160NetInfoPortDomain DisplayString, dts4160NetInfoPortDHCPMode EnabledDisabled, dts4160NetInfoPortIPv6linklocal DTSNetworkName, dts4160NetInfoPortIP1v6 DTSNetworkName, dts4160NetInfoPortIP2v6 DTSNetworkName, dts4160NetInfoPortIPGWv6 DTSNetworkName, dts4160NetInfoPortVLANid1 Integer32, dts4160NetInfoPortVLANPCP1 Integer32, dts4160NetInfoPortVLANid2 Integer32, dts4160NetInfoPortVLANPCP2 Integer32, dts4160NetInfoPortLAGStatus Unsigned32, dts4160NetInfoPortPTPConfig Integer32, dts4160NetInfoPortSyncE EnabledDisabled } dts4160NetInfoPortIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the network port configuration entry (only virtual). Valid index = 1 .. 4" ::= { dts4160NetInfoPortEntry 1 } dts4160NetInfoPortStatus OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port status. 0: down 1: up" ::= { dts4160NetInfoPortEntry 2 } dts4160NetInfoPortLink OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet link mode Bit 0 - 1: speed 0: Unknown 1: 10Mbit 2: 100Mbit 3: 1000Mbit Bit5: 1 = full duplex, 0 = half duplex Bit6: 1 = Link ok, 0 = Link not OK Bit7: auto negotiation enabled Example: Value = 227 --> Auto neg. enabled, link ok, 1000Mbit/full" ::= { dts4160NetInfoPortEntry 3 } dts4160NetInfoPortMAC OBJECT-TYPE SYNTAX DisplayString (SIZE(19)) MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address (xx:xx:xx:xx:xx:xx)" ::= { dts4160NetInfoPortEntry 4 } dts4160NetInfoPortIP1v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx)" ::= { dts4160NetInfoPortEntry 5 } dts4160NetInfoPortSubnet1v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 subnet mask (xxx.xxx.xxx.xxx)" ::= { dts4160NetInfoPortEntry 6 } dts4160NetInfoPortGW1v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) of the gateway" ::= { dts4160NetInfoPortEntry 7 } dts4160NetInfoPortIP2v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx)" ::= { dts4160NetInfoPortEntry 8 } dts4160NetInfoPortSubnet2v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 subnet mask (xxx.xxx.xxx.xxx)" ::= { dts4160NetInfoPortEntry 9 } dts4160NetInfoPortGW2v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) of the gateway" ::= { dts4160NetInfoPortEntry 10} dts4160NetInfoPortDNSv4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) of the nameserver" ::= { dts4160NetInfoPortEntry 11 } dts4160NetInfoPortHostname OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Hostname of the DTS." ::= { dts4160NetInfoPortEntry 12 } dts4160NetInfoPortDomain OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Domain name of the DTS." ::= { dts4160NetInfoPortEntry 13 } dts4160NetInfoPortDHCPMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION "DHCP mode. 0: DHCP disabled 1: DHCP enabled" ::= { dts4160NetInfoPortEntry 14 } dts4160NetInfoPortIPv6linklocal OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IP V6 link local network address (xxxx:xxxx::xxxx)" ::= { dts4160NetInfoPortEntry 15 } dts4160NetInfoPortIP1v6 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IP V6 network address 1 (xxxx:xxxx::xxxx)" ::= { dts4160NetInfoPortEntry 16 } dts4160NetInfoPortIP2v6 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IP V6 network address 2 (xxxx:xxxx::xxxx)" ::= { dts4160NetInfoPortEntry 17 } dts4160NetInfoPortIPGWv6 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IP V6 gateway address (xxxx:xxxx::xxxx)" ::= { dts4160NetInfoPortEntry 18 } dts4160NetInfoPortVLANid1 OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN-ID." ::= { dts4160NetInfoPortEntry 19 } dts4160NetInfoPortVLANPCP1 OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN-PCP QoS." ::= { dts4160NetInfoPortEntry 20 } dts4160NetInfoPortVLANid2 OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN-ID." ::= { dts4160NetInfoPortEntry 21 } dts4160NetInfoPortVLANPCP2 OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN-PCP QoS." ::= { dts4160NetInfoPortEntry 22 } dts4160NetInfoPortLAGStatus OBJECT-TYPE SYNTAX Unsigned32 (0..1|255) MAX-ACCESS read-only STATUS current DESCRIPTION "LAG (Link-Aggregation) status. 0: LAG disabled 1: LAG enabled 255: LAG not supported" ::= { dts4160NetInfoPortEntry 23 } dts4160NetInfoPortPTPConfig OBJECT-TYPE SYNTAX Integer32 (0..12) MAX-ACCESS read-only STATUS current DESCRIPTION "Selected PTP configuration entry. 0 : PTP disable 1 .. 12 : PTP configuration entry" ::= { dts4160NetInfoPortEntry 24 } dts4160NetInfoPortSyncE OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION "SyncE mode. 0: SyncE disabled 1: SyncE enabled" ::= { dts4160NetInfoPortEntry 25 } -- ----------------------------------------------------------------- -- -- System - Network information - LAG IF -- ----------------------------------------------------------------- -- dts4160NetInfoLAGIfTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4160NetInfoLAGIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with network interface link aggregation info" REFERENCE "OFS_NWINFOLAG1_STATUS, 1, 1, 2, 17, {{84,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{20,VARTYPE_STRING},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4160NetworkInfo 30} dts4160NetInfoLAGIfEntry OBJECT-TYPE SYNTAX Dts4160NetInfoLAGIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4160NetInfoLAGIfIndex } ::= { dts4160NetInfoLAGIfTable 1 } Dts4160NetInfoLAGIfEntry ::= SEQUENCE { dts4160NetInfoLAGIfIndex Integer32, dts4160NetInfoLAGIfStatus Unsigned32, dts4160NetInfoLAGIfPollIntervall Integer32, dts4160NetInfoLAGIfLACPRate Unsigned32, dts4160NetInfoLAGIfMinLinks Integer32, dts4160NetInfoLAGIfAggregatorID Integer32, dts4160NetInfoLAGIfAggregatorNrActivePorts Integer32, dts4160NetInfoLAGIfAggregatorActorKey Integer32, dts4160NetInfoLAGIfPartnerMACAddress DisplayString, dts4160NetInfoLAGIfSlave1Status Unsigned32, dts4160NetInfoLAGIfSlave1LinkSpeed Integer32, dts4160NetInfoLAGIfSlave1LinkDuplex Unsigned32, dts4160NetInfoLAGIfSlave1LinkFailureCount Integer32, dts4160NetInfoLAGIfSlave2Status Unsigned32, dts4160NetInfoLAGIfSlave2LinkSpeed Integer32, dts4160NetInfoLAGIfSlave2LinkDuplex Unsigned32, dts4160NetInfoLAGIfSlave2LinkFailureCount Integer32 } dts4160NetInfoLAGIfIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the network port configuration entry (only virtual). Valid index = 1 .. 4" ::= { dts4160NetInfoLAGIfEntry 1 } dts4160NetInfoLAGIfStatus OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port status. 0: down 1: up" ::= { dts4160NetInfoLAGIfEntry 2 } dts4160NetInfoLAGIfPollIntervall OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Poll intervall monitoring the state." ::= { dts4160NetInfoLAGIfEntry 3 } dts4160NetInfoLAGIfLACPRate OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port status. 0: slow 1: fast" ::= { dts4160NetInfoLAGIfEntry 4 } dts4160NetInfoLAGIfMinLinks OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum active slave links required to bring the LAG link up." ::= { dts4160NetInfoLAGIfEntry 5 } dts4160NetInfoLAGIfAggregatorID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Aggregator ID." ::= { dts4160NetInfoLAGIfEntry 6 } dts4160NetInfoLAGIfAggregatorNrActivePorts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of activ network ports." ::= { dts4160NetInfoLAGIfEntry 7 } dts4160NetInfoLAGIfAggregatorActorKey OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Internal used Actor Key." ::= { dts4160NetInfoLAGIfEntry 8 } dts4160NetInfoLAGIfPartnerMACAddress OBJECT-TYPE SYNTAX DisplayString (SIZE(19)) MAX-ACCESS read-only STATUS current DESCRIPTION "Partner MAC address (xx:xx:xx:xx:xx:xx)" ::= { dts4160NetInfoLAGIfEntry 9 } dts4160NetInfoLAGIfSlave1Status OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port status. 0: down 1: up" ::= { dts4160NetInfoLAGIfEntry 10 } dts4160NetInfoLAGIfSlave1LinkSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Link speed." ::= { dts4160NetInfoLAGIfEntry 11 } dts4160NetInfoLAGIfSlave1LinkDuplex OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port duplex mode. 0: half duplex 1: full duplex" ::= { dts4160NetInfoLAGIfEntry 12 } dts4160NetInfoLAGIfSlave1LinkFailureCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Link Failure count." ::= { dts4160NetInfoLAGIfEntry 13 } dts4160NetInfoLAGIfSlave2Status OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port status. 0: down 1: up" ::= { dts4160NetInfoLAGIfEntry 14 } dts4160NetInfoLAGIfSlave2LinkSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Link speed." ::= { dts4160NetInfoLAGIfEntry 15 } dts4160NetInfoLAGIfSlave2LinkDuplex OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port duplex mode. 0: half duplex 1: full duplex" ::= { dts4160NetInfoLAGIfEntry 16 } dts4160NetInfoLAGIfSlave2LinkFailureCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Link Failure count." ::= { dts4160NetInfoLAGIfEntry 17 } -- ----------------------------------------------------------------- -- -- System - Time information -- ----------------------------------------------------------------- -- dts4160SystemTimeInfo OBJECT IDENTIFIER ::= { dts4160System 30 } dts4160TimeInfoGeneral OBJECT IDENTIFIER ::= { dts4160SystemTimeInfo 1 } dts4160TimeInfoStratum OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "DTS Stratum level (1-16). The Stratum level is the quality of the time synchronisation. Stratum: 1 = best quality Stratum 16 = not synchronized" REFERENCE "OFS_TINFO_STRATUM, 1, VARTYPE_BYTE" ::= { dts4160TimeInfoGeneral 1 } dts4160TimeInfoLastDrift OBJECT-TYPE SYNTAX Integer32 UNITS "micro seconds (us)" MAX-ACCESS read-only STATUS current DESCRIPTION "The last time drift." REFERENCE "OFS_TINFO_LASTDRIFT, 4, VARTYPE_INTEGER" ::= { dts4160TimeInfoGeneral 2 } dts4160TimeInfoLastQCorr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "When last quartz correction occured." REFERENCE "OFS_TINFO_LASTQCORR, 4, VARTYPE_DWORD" ::= { dts4160TimeInfoGeneral 3 } dts4160TimeInfoTimeSource OBJECT-TYPE SYNTAX INTEGER { none (0), gnss (1), redundantlink (2), ptp (3), gnssdcf(4), e1(5), frequencyin(6), manual (10), oscillator (99) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current active time source: 0: none 1: GNSS 2: Redundant Link 3: PTP 4: GNSS-DCF 5: E1 6: Frequency-In (F-In) 10: Manual 99: OSCILLATOR" REFERENCE "OFS_TINFO_SOURCETYPE, 1, VARTYPE_BYTE" ::= { dts4160TimeInfoGeneral 4 } dts4160TimeInfoSourceQuality OBJECT-TYPE SYNTAX Integer32 UNITS "Percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Time information reception quality of the selected source. Range: 0 .. 100%" REFERENCE "OFS_TINFO_SQUALI, 1, VARTYPE_BYTE" ::= { dts4160TimeInfoGeneral 5 } dts4160TimeInfoSourceOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "The current time source offset in nano seconds. The value is limited to -1800000000 ... 1800000000. If the offset is outside the limit, the variable will be set to the maximum positiv (2147483627) or negativ (-2147483628) value." REFERENCE "OFS_TINFO_SOFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4160TimeInfoGeneral 6 } dts4160TimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last time information from active source" REFERENCE "OFS_TINFOV2_LASTINFO, 4, VARTYPE_DWORD" ::= { dts4160TimeInfoGeneral 7 } dts4160TimeInfoSourceJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Jitter of the source" REFERENCE "OFS_TINFO_JITTER, 4, VARTYPE_DWORD" ::= { dts4160TimeInfoGeneral 8 } dts4160TimeInfoLeapSecStatus OBJECT-TYPE SYNTAX Gauge32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current Leap Second status. 0: No Leap Second detected 1: Leap Second detected" REFERENCE "OFS_TINFOV2_LEAP_SEC_DETECTED, 1, VARTYPE_BYTE" ::= { dts4160TimeInfoGeneral 30 } dts4160TimeInfoLeapSecDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the detected Leap Second. 0: No info >0: Timestamp " REFERENCE "OFS_TINFOV2_LEAP_SEC_TIMESTAMP, 4, VARTYPE_DWORD" ::= { dts4160TimeInfoGeneral 31 } dts4160TimeInfoLeapSecDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the detected Leap Second. -1: Remove 1 second 0: No info 1: Add 1 second" REFERENCE "OFS_TINFOV2_LEAP_SEC_DIRECTION, 1, VARTYPE_BYTE" ::= { dts4160TimeInfoGeneral 32 } dts4160TimeInfoLeapSecSource OBJECT-TYPE SYNTAX INTEGER { none (0), gnss (1), redundantlink (2), ptp (3), gnssdcf (4), manual (10) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current active time source: 0: none 1: GNSS 2: Redundant Link 3: PTP 4: GNSS-DCF 10: Manual" REFERENCE "OFS_TINFOV2_LEAP_SEC_SOURCE, 1, VARTYPE_BYTE" ::= { dts4160TimeInfoGeneral 33 } dts4160TimeInfoLeapSecLastDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the last implemented Leap Second. 0: No info, no Leap Second implemented >0: Timestamp " REFERENCE "OFS_TINFOV2_LEAP_SEC_LAST, 4, VARTYPE_DWORD" ::= { dts4160TimeInfoGeneral 34 } dts4160TimeInfoLeapSecLastDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the last implemented Leap Second. This second (+/-1) has to be calculated to the OFS_TINFOV2_LEAP_SEC_LAST timestamp. -1: Remove 1 second to the timestamp 0: No info 1: Add 1 second to the timestamp " REFERENCE "OFS_TINFOV2_LEAP_SEC_LAST_DIR, 1, VARTYPE_BYTE" ::= { dts4160TimeInfoGeneral 35 } -- --------------------------------- -- -- TIME INFO - GNSS synchronization -- --------------------------------- -- dts4160GNSSTimeInfo OBJECT IDENTIFIER ::= { dts4160SystemTimeInfo 10 } dts4160GNSSTimeInfoGNSSState OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Overall state of the GNSS receiver. 0: GNSS invalid 1: GNSS OK, GNSS can be used as time source" REFERENCE "OFS_GNSSINFO_GNSS_STATE, 1, VARTYPE_BYTE" ::= { dts4160GNSSTimeInfo 1 } dts4160GNSSTimeInfoSVCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of used satellites for navigation. < 4 : Not enough satellites in view >= 4 : OK, enough satellites in view" REFERENCE "OFS_GNSSINFO_SV_USED, 1, VARTYPE_BYTE" ::= { dts4160GNSSTimeInfo 5 } dts4160GNSSTimeInfoTDOP OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "TDOP value for time as int (100 equals 1.00) > 2.00 : TDOP is not accurate < 2.00 : OK, TDOP value is accurate for valid time" REFERENCE "OFS_GNSSINFO_TDOP, 4, VARTYPE_INTEGER" ::= { dts4160GNSSTimeInfo 6 } dts4160GNSSTimeInfoInternalAccuracy OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Internal receiver time accuracy (ns) > 100 : Internal accuracy bad < 100 : OK, internal accuracy is valid" REFERENCE "OFS_GNSSINFO_TACC, 4, VARTYPE_INTEGER" ::= { dts4160GNSSTimeInfo 7 } dts4160GNSSTimeInfoFixType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "GNSS fix Type, time application requires 3D-fix: 0: no fix 1: dead reckoning only 2: 2D-fix 3: 3D-fix 4: GNSS + dead reckoning combined 5: time only fix" REFERENCE "OFS_GNSSINFO_FIXE_TYPE, 1, VARTYPE_INTEGER" ::= { dts4160GNSSTimeInfo 8 } dts4160GNSSTimeInfoValidity OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the redundant operation. 0: Time invalid 1: Time OK" REFERENCE "OFS_GNSSINFO_VALIDITY_TIME, 1, VARTYPE_BYTE" ::= { dts4160GNSSTimeInfo 9 } dts4160GNSSTimeInfoSurveyInMode OBJECT-TYPE SYNTAX INTEGER { disableFixedPosition (0), fixedPosition (1), manualPosition (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Survey mode for position 0: Disabled, no Fixed Position 1: Fixed Position 2: Manual position" REFERENCE "OFS_GNSSINFO_SURVEYIN_MODE, 1, VARTYPE_BYTE" ::= { dts4160GNSSTimeInfo 10 } dts4160GNSSTimeInfoSurveyInStatus OBJECT-TYPE SYNTAX INTEGER { off(0), inprogress(1), complete (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Survey status for position 0: Disabled, no Fixed Position 1: Survey-in in-progress 2: Survey-in complete" REFERENCE "OFS_GNSSINFO_SURVEY_PROGRESS, 1, VARTYPE_BYTE" ::= { dts4160GNSSTimeInfo 11 } dts4160GNSSTimeInfoPositionLatitude OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Position latitude value as long (10000000 equals 1.00)" REFERENCE "OFS_GNSSINFO_LATITUDE, 4, VARTYPE_DWORD" ::= { dts4160GNSSTimeInfo 12 } dts4160GNSSTimeInfoPositionLongitude OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Position longitude value long (10000000 equals 1.00)" REFERENCE "OFS_GNSSINFO_LONGITUDE, 4, VARTYPE_DWORD" ::= { dts4160GNSSTimeInfo 13 } dts4160GNSSTimeInfoPositionHeightAboveSea OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Height above sea as long (1000 equals 1.00)" REFERENCE "OFS_GNSSINFO_HEIGHTABOVESEA, 4, VARTYPE_DWORD" ::= { dts4160GNSSTimeInfo 14 } dts4160GNSSTimeInfoAntennaDelay OBJECT-TYPE SYNTAX Unsigned32 (0..1000) UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Antenna cable delay in nano seconds" REFERENCE "OFS_GNSS_ANTENNA_DELAY, 4, VARTYPE_DWORD" ::= { dts4160GNSSTimeInfo 20 } dts4160GNSSTimeInfoLeapSecStatus OBJECT-TYPE SYNTAX Gauge32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current Leap Second status. 0: No Leap Second detected 1: Leap Second detected" REFERENCE "OFS_TINFOV2_GNSS_LEAP_SEC_DETECTED, 1, VARTYPE_BYTE" ::= { dts4160GNSSTimeInfo 30 } dts4160GNSSTimeInfoLeapSecDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the detected Leap Second. 0: No info >0: Timestamp " REFERENCE "OFS_TINFOV2_GNSS_LEAP_SEC_TIMESTAMP, 4, VARTYPE_DWORD" ::= { dts4160GNSSTimeInfo 31 } dts4160GNSSTimeInfoLeapSecDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the detected Leap Second. -1: Remove 1 second 0: No info 1: Add 1 second" REFERENCE "OFS_TINFOV2_GNSS_LEAP_SEC_DIRECTION, 1, VARTYPE_BYTE" ::= { dts4160GNSSTimeInfo 32 } dts4160GNSSTimeInfoJammingState OBJECT-TYPE SYNTAX INTEGER { unkonwn(0), ok(1), warning(2), critical(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Jamming/Interference status monitor 0: Unknown / disabled 1: OK - No significant jamming 2: Warning - interference visible but fix OK 3: Critical - interference visible and no fix" REFERENCE "OFS_GNSSINFO_JAMMING_STATUS, 1, VARTYPE_BYTE" ::= { dts4160GNSSTimeInfo 40 } dts4160GNSSTimeInfoJammingIndicator OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "CW Jamming indicator. 0: no CW jamming 255: strong CW jamming" REFERENCE "OFS_GNSSINFO_JAMMING_INDICATOR, 1, VARTYPE_BYTE" ::= { dts4160GNSSTimeInfo 41 } dts4160GNSSTimeInfoAGCMonitor OBJECT-TYPE SYNTAX Integer32(0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "AGC (Automatic Gain Control) Monitor" REFERENCE "OFS_GNSSINFO_AGC_MON, 2, VARTYPE_WORD" ::= { dts4160GNSSTimeInfo 42 } dts4160GNSSTimeInfoNoisePerMS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Noise Level as measured by the GPS Core" REFERENCE "OFS_GNSSINFO_NOISE_LEVEL, 2, VARTYPE_WORD" ::= { dts4160GNSSTimeInfo 43 } dts4160GNSSTimeInfoConfigured OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source configuration status. 0: Not configured 1: Configured" REFERENCE "OFS_TINFOV2_GNSS_CONFIGURED, 1, VARTYPE_BYTE" ::= { dts4160GNSSTimeInfo 60 } dts4160GNSSTimeInfoPriority OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Source priority configuration" REFERENCE "OFS_TINFOV2_GNSS_PRIORITY, 1, VARTYPE_BYTE" ::= { dts4160GNSSTimeInfo 61 } dts4160GNSSTimeInfoState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source locked status. Bit 0: Timesource reachable status Bit 1: Timesource Locked status" REFERENCE "OFS_TINFOV2_GNSS_TS_STATE, 4, VARTYPE_INTEGER" ::= { dts4160GNSSTimeInfo 62 } dts4160GNSSTimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last synchronisation time" REFERENCE "OFS_TINFOV2_GNSS_LASTTIME, 4, VARTYPE_DWORD" ::= { dts4160GNSSTimeInfo 63 } dts4160GNSSTimeInfoOffsetSec OBJECT-TYPE SYNTAX Integer32 UNITS "seconds (s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset seconds" REFERENCE "OFS_TINFOV2_GNSS_OFFSET_S, 4, VARTYPE_DWORD" ::= { dts4160GNSSTimeInfo 64 } dts4160GNSSTimeInfoOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset nano seconds" REFERENCE "OFS_TINFOV2_GNSS_OFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4160GNSSTimeInfo 65 } dts4160GNSSTimeInfoDeviation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calculated deviation in ppb." REFERENCE "OFS_TINFOV2_GNSS_DEVIATION, 4, VARTYPE_INTEGER" ::= { dts4160GNSSTimeInfo 66 } dts4160GNSSTimeInfoRating OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal calculated rating. Equivalent to priority." REFERENCE "OFS_TINFOV2_GNSS_RATING, 1, VARTYPE_BYTE" ::= { dts4160GNSSTimeInfo 67 } -- --------------------------------- -- -- Redundant Link operation -- --------------------------------- -- dts4160RedLinkTimeInfo OBJECT IDENTIFIER ::= { dts4160SystemTimeInfo 20 } dts4160RedLinkTimeInfoLinkState OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the redundant operation. 0: Not defined 1: Master role 2: Slave role" REFERENCE "OFS_TINFOV2_REDUNDANT_STATE, 1, VARTYPE_BYTE" ::= { dts4160RedLinkTimeInfo 1 } dts4160RedLinkTimeInfoLeapSecStatus OBJECT-TYPE SYNTAX Gauge32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current Leap Second status. 0: No Leap Second detected 1: Leap Second detected" REFERENCE "OFS_TINFOV2_REDUNDANT_LEAP_SEC_DETECTED, 1, VARTYPE_BYTE" ::= { dts4160RedLinkTimeInfo 30 } dts4160RedLinkTimeInfoLeapSecDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the detected Leap Second. 0: No info >0: Timestamp " REFERENCE "OFS_TINFOV2_REDUNDANT_LEAP_SEC_TIMESTAMP, 4, VARTYPE_DWORD" ::= { dts4160RedLinkTimeInfo 31 } dts4160RedLinkTimeInfoLeapSecDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the detected Leap Second. -1: Remove 1 second 0: No info 1: Add 1 second" REFERENCE "OFS_TINFOV2_REDUNDANT_LEAP_SEC_DIRECTION, 1, VARTYPE_BYTE" ::= { dts4160RedLinkTimeInfo 32 } dts4160RedLinkTimeInfoConfigured OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source configuration status. 0: Not configured 1: Configured" REFERENCE "OFS_TINFOV2_REDUNDANT_CONFIGURED, 1, VARTYPE_BYTE" ::= { dts4160RedLinkTimeInfo 60 } dts4160RedLinkTimeInfoPriority OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Source priority configuration" REFERENCE "OFS_TINFOV2_REDUNDANT_PRIORITY, 1, VARTYPE_BYTE" ::= { dts4160RedLinkTimeInfo 61 } dts4160RedLinkTimeInfoState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source locked status. Bit 0: Timesource reachable status Bit 1: Timesource Locked status" REFERENCE "OFS_TINFOV2_REDUNDANT_TS_STATE, 4, VARTYPE_INTEGER" ::= { dts4160RedLinkTimeInfo 62 } dts4160RedLinkTimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Redundant link synchronisation time (Last time received from Master as Slave)." REFERENCE "OFS_TINFOV2_REDUNDANT_LASTTIME, 4, VARTYPE_DWORD" ::= { dts4160RedLinkTimeInfo 63 } dts4160RedLinkTimeInfoOffsetSec OBJECT-TYPE SYNTAX Integer32 UNITS "seconds (s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Last measured offset to Master as Slave seconds" REFERENCE "OFS_TINFOV2_REDUNDANT_OFFSET_S, 4, VARTYPE_DWORD" ::= { dts4160RedLinkTimeInfo 64 } dts4160RedLinkTimeInfoOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Last measured offset to Master as Slave nano seconds" REFERENCE "OFS_TINFOV2_REDUNDANT_OFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4160RedLinkTimeInfo 65 } dts4160RedLinkTimeInfoDeviation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calculated deviation in ppb." REFERENCE "OFS_TINFOV2_REDUNDANT_DEVIATION, 4, VARTYPE_INTEGER" ::= { dts4160RedLinkTimeInfo 66 } dts4160RedLinkTimeInfoRating OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal calculated rating. Equivalent to priority." REFERENCE "OFS_TINFOV2_REDUNDANT_RATING, 1, VARTYPE_BYTE" ::= { dts4160RedLinkTimeInfo 67 } -- --------------------------------- -- -- TIME INFO - PTP synchronization -- --------------------------------- -- dts4160PTPTimeInfo OBJECT IDENTIFIER ::= { dts4160SystemTimeInfo 30 } dts4160PTPTimeInfoLeapSecStatus OBJECT-TYPE SYNTAX Gauge32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current Leap Second status. 0: No Leap Second detected 1: Leap Second detected" REFERENCE "OFS_TINFOV2_PTP_LEAP_SEC_DETECTED, 1, VARTYPE_BYTE" ::= { dts4160PTPTimeInfo 30 } dts4160PTPTimeInfoLeapSecDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the detected Leap Second. 0: No info >0: Timestamp " REFERENCE "OFS_TINFOV2_PTP_LEAP_SEC_TIMESTAMP, 4, VARTYPE_DWORD" ::= { dts4160PTPTimeInfo 31 } dts4160PTPTimeInfoLeapSecDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the detected Leap Second. -1: Remove 1 second 0: No info 1: Add 1 second" REFERENCE "OFS_TINFOV2_PTP_LEAP_SEC_DIRECTION, 1, VARTYPE_BYTE" ::= { dts4160PTPTimeInfo 32 } dts4160PTPTimeInfoConfigured OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source configuration status. 0: Not configured 1: Configured" REFERENCE "OFS_TINFOV2_PTP_CONFIGURED, 1, VARTYPE_BYTE" ::= { dts4160PTPTimeInfo 60 } dts4160PTPTimeInfoPriority OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Source priority configuration" REFERENCE "OFS_TINFOV2_PTP_PRIORITY, 1, VARTYPE_BYTE" ::= { dts4160PTPTimeInfo 61 } dts4160PTPTimeInfoState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source locked status. Bit 0: Timesource reachable status Bit 1: Timesource Locked status" REFERENCE "OFS_TINFOV2_PTP_TS_STATE, 4, VARTYPE_INTEGER" ::= { dts4160PTPTimeInfo 62 } dts4160PTPTimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last synchronisation time" REFERENCE "OFS_TINFOV2_PTP_LASTTIME, 4, VARTYPE_DWORD" ::= { dts4160PTPTimeInfo 63 } dts4160PTPTimeInfoOffsetSec OBJECT-TYPE SYNTAX Integer32 UNITS "seconds (s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset seconds" REFERENCE "OFS_TINFOV2_PTP_OFFSET_S, 4, VARTYPE_DWORD" ::= { dts4160PTPTimeInfo 64 } dts4160PTPTimeInfoOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset nano seconds" REFERENCE "OFS_TINFOV2_PTP_OFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4160PTPTimeInfo 65 } dts4160PTPTimeInfoDeviation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calculated deviation in ppb." REFERENCE "OFS_TINFOV2_PTP_DEVIATION, 4, VARTYPE_INTEGER" ::= { dts4160PTPTimeInfo 66 } dts4160PTPTimeInfoRating OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal calculated rating. Equivalent to priority." REFERENCE "OFS_TINFOV2_PTP_RATING, 1, VARTYPE_BYTE" ::= { dts4160PTPTimeInfo 67 } -- --------------------------------- -- -- TIME INFO - GNSS-DCF synchronization -- --------------------------------- -- dts4160DCFTimeInfo OBJECT IDENTIFIER ::= { dts4160SystemTimeInfo 40 } dts4160DCFTimeInfoSatNbr OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of satellites in view (only GPS 4500)" REFERENCE "OFS_TINFO_DCF_SAT_NBR, 1, VARTYPE_BYTE" ::= { dts4160DCFTimeInfo 4 } dts4160DCFTimeInfoSecCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter of DCF pulses (usually 0..58)" REFERENCE "OFS_TINFO_DCF_SECCNT, 4, VARTYPE_DWORD" ::= { dts4160DCFTimeInfo 5 } dts4160DCFTimeInfoLeapSecStatus OBJECT-TYPE SYNTAX Gauge32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current Leap Second status. 0: No Leap Second detected 1: Leap Second detected" REFERENCE "OFS_TINFOV2_DCF_LEAP_SEC_DETECTED, 1, VARTYPE_BYTE" ::= { dts4160DCFTimeInfo 30 } dts4160DCFTimeInfoLeapSecDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the detected Leap Second. 0: No info >0: Timestamp " REFERENCE "OFS_TINFOV2_DCF_LEAP_SEC_TIMESTAMP, 4, VARTYPE_DWORD" ::= { dts4160DCFTimeInfo 31 } dts4160DCFTimeInfoLeapSecDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the detected Leap Second. -1: Remove 1 second 0: No info 1: Add 1 second" REFERENCE "OFS_TINFOV2_DCF_LEAP_SEC_DIRECTION, 1, VARTYPE_BYTE" ::= { dts4160DCFTimeInfo 32 } dts4160DCFTimeInfoConfigured OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source configuration status. 0: Not configured 1: Configured" REFERENCE "OFS_TINFOV2_DCF_CONFIGURED, 1, VARTYPE_BYTE" ::= { dts4160DCFTimeInfo 60 } dts4160DCFTimeInfoPriority OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Source priority configuration" REFERENCE "OFS_TINFOV2_DCF_PRIORITY, 1, VARTYPE_BYTE" ::= { dts4160DCFTimeInfo 61 } dts4160DCFTimeInfoState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source locked status. Bit 0: Timesource reachable status Bit 1: Timesource Locked status" REFERENCE "OFS_TINFOV2_DCF_TS_STATE, 4, VARTYPE_INTEGER" ::= { dts4160DCFTimeInfo 62 } dts4160DCFTimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last synchronisation time" REFERENCE "OFS_TINFOV2_DCF_LASTTIME, 4, VARTYPE_DWORD" ::= { dts4160DCFTimeInfo 63 } dts4160DCFTimeInfoOffsetSec OBJECT-TYPE SYNTAX Integer32 UNITS "seconds (s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset seconds" REFERENCE "OFS_TINFOV2_DCF_OFFSET_S, 4, VARTYPE_DWORD" ::= { dts4160DCFTimeInfo 64 } dts4160DCFTimeInfoOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset nano seconds" REFERENCE "OFS_TINFOV2_DCF_OFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4160DCFTimeInfo 65 } dts4160DCFTimeInfoDeviation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calculated deviation in ppb." REFERENCE "OFS_TINFOV2_DCF_DEVIATION, 4, VARTYPE_INTEGER" ::= { dts4160DCFTimeInfo 66 } dts4160DCFTimeInfoRating OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal calculated rating. Equivalent to priority." REFERENCE "OFS_TINFOV2_DCF_RATING, 1, VARTYPE_BYTE" ::= { dts4160DCFTimeInfo 67 } -- --------------------------------- -- -- TIME INFO - E1 synchronization -- --------------------------------- -- dts4160E1TimeInfo OBJECT IDENTIFIER ::= { dts4160SystemTimeInfo 50 } dts4160E1TimeInfoQualityLevel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "E1 Quality level I - III" REFERENCE "OFS_TINFOV2_E1_TS_QL, 1, VARTYPE_BYTE" ::= { dts4160E1TimeInfo 1 } dts4160E1TimeInfoConfigured OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source configuration status. 0: Not configured 1: Configured" REFERENCE "OFS_TINFOV2_E1_CONFIGURED, 1, VARTYPE_BYTE" ::= { dts4160E1TimeInfo 60 } dts4160E1TimeInfoPriority OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Source priority configuration" REFERENCE "OFS_TINFOV2_E1_PRIORITY, 1, VARTYPE_BYTE" ::= { dts4160E1TimeInfo 61 } dts4160E1TimeInfoState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source locked status. Bit 0: Timesource reachable status Bit 1: Timesource Locked status" REFERENCE "OFS_TINFOV2_E1_TS_STATE, 4, VARTYPE_INTEGER" ::= { dts4160E1TimeInfo 62 } dts4160E1TimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last synchronisation time" REFERENCE "OFS_TINFOV2_E1_LASTTIME, 4, VARTYPE_DWORD" ::= { dts4160E1TimeInfo 63 } dts4160E1TimeInfoOffsetSec OBJECT-TYPE SYNTAX Integer32 UNITS "seconds (s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset seconds" REFERENCE "OFS_TINFOV2_E1_OFFSET_S, 4, VARTYPE_DWORD" ::= { dts4160E1TimeInfo 64 } dts4160E1TimeInfoOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset nano seconds" REFERENCE "OFS_TINFOV2_E1_OFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4160E1TimeInfo 65 } dts4160E1TimeInfoDeviation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calculated deviation in ppb." REFERENCE "OFS_TINFOV2_E1_DEVIATION, 4, VARTYPE_INTEGER" ::= { dts4160E1TimeInfo 66 } dts4160E1TimeInfoRating OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal calculated rating. Equivalent to priority." REFERENCE "OFS_TINFOV2_E1_RATING, 1, VARTYPE_BYTE" ::= { dts4160E1TimeInfo 67 } -- --------------------------------- -- -- TIME INFO - Frequency synchronization -- --------------------------------- -- dts4160FINTimeInfo OBJECT IDENTIFIER ::= { dts4160SystemTimeInfo 60 } dts4160FINTimeInfoConfigured OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source configuration status. 0: Not configured 1: Configured" REFERENCE "OFS_TINFOV2_F_IN_CONFIGURED, 1, VARTYPE_BYTE" ::= { dts4160FINTimeInfo 60 } dts4160FINTimeInfoPriority OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Source priority configuration" REFERENCE "OFS_TINFOV2_F_IN_PRIORITY, 1, VARTYPE_BYTE" ::= { dts4160FINTimeInfo 61 } dts4160FINTimeInfoState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source locked status. Bit 0: Timesource reachable status Bit 1: Timesource Locked status" REFERENCE "OFS_TINFOV2_F_IN_TS_STATE, 4, VARTYPE_INTEGER" ::= { dts4160FINTimeInfo 62 } dts4160FINTimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last synchronisation time" REFERENCE "OFS_TINFOV2_F_IN_LASTTIME, 4, VARTYPE_DWORD" ::= { dts4160FINTimeInfo 63 } dts4160FINTimeInfoOffsetSec OBJECT-TYPE SYNTAX Integer32 UNITS "seconds (s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset seconds" REFERENCE "OFS_TINFOV2_F_IN_OFFSET_S, 4, VARTYPE_DWORD" ::= { dts4160FINTimeInfo 64 } dts4160FINTimeInfoOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset nano seconds" REFERENCE "OFS_TINFOV2_F_IN_OFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4160FINTimeInfo 65 } dts4160FINTimeInfoDeviation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calculated deviation in ppb." REFERENCE "OFS_TINFOV2_F_IN_DEVIATION, 4, VARTYPE_INTEGER" ::= { dts4160FINTimeInfo 66 } dts4160FINTimeInfoRating OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal calculated rating. Equivalent to priority." REFERENCE "OFS_TINFOV2_F_IN_RATING, 1, VARTYPE_BYTE" ::= { dts4160FINTimeInfo 67 } -- --------------------------------- -- -- TIME INFO - NTP synchronization -- --------------------------------- -- dts4160NTPTimeInfo OBJECT IDENTIFIER ::= { dts4160SystemTimeInfo 80 } dts4160NTPTimeInfoCurrentSource OBJECT-TYPE SYNTAX OCTET STRING (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Current NTP time source (system peer)." REFERENCE "OFS_TINFO_NTP_SOURCE, 63, VARTYPE_STRING" ::= { dts4160NTPTimeInfo 1 } dts4160NTPTimeInfoSystemOffset OBJECT-TYPE SYNTAX Integer32 UNITS "micro seconds (us)" MAX-ACCESS read-only STATUS current DESCRIPTION "Current system time offset." REFERENCE "OFS_TINFO_NTP_OFFSET, 4, VARTYPE_DWORD" ::= { dts4160NTPTimeInfo 2 } dts4160NTPTimeInfoSourceJitter OBJECT-TYPE SYNTAX Integer32 UNITS "micro seconds (us)" MAX-ACCESS read-only STATUS current DESCRIPTION "Current time source jitter." REFERENCE "OFS_TINFO_NTP_JITTER, 4, VARTYPE_DWORD" ::= { dts4160NTPTimeInfo 3 } dts4160NTPTimeInfoStratum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Stratum of NTP" REFERENCE "OFS_TINFO_NTP_STRATUM, 1, VARTYPE_BYTE" ::= { dts4160NTPTimeInfo 4 } dts4160NTPTimeInfoFrequency OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frequency of NTP" REFERENCE "OFS_TINFO_NTP_FREQ, 4, VARTYPE_INTEGER" ::= { dts4160NTPTimeInfo 5 } dts4160NTPTInfoReachable OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current reach of NTP source (octal 0..377)" REFERENCE "OFS_TINFO_NTP_REACH, 1, VARTYPE_BYTE" ::= { dts4160NTPTimeInfo 6 } -- --------------------------------- -- -- TIME INFO - Oscillator: -- --------------------------------- -- dts4160OscTimeInfo OBJECT IDENTIFIER ::= { dts4160SystemTimeInfo 99 } dts4160OscTimeInfoPLLState OBJECT-TYPE SYNTAX INTEGER { synchronizing (0), disciplining (1), holdingover (2), follow (3), slave (4), stop (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the PLL. 0 = SYNCHRONIZE, 1 = DISCIPLINE, 2 = HOLDOVER, 3 = FOLLOW, 4 = SLAVE, 5 = STOP" REFERENCE "OFS_OSCINFO_REGULATE_STATE, 1, VARTYPE_BYTE" ::= { dts4160OscTimeInfo 1 } dts4160OscTimeInfoPPSTrackingState OBJECT-TYPE SYNTAX INTEGER { none (0), poor (1), good (2), lost (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the 1pps tracking. 0 = None 1 = Poor 2 = Good 3 = Lost" REFERENCE "OFS_OSCINFO_PPS_TRACKING_STATE, 1, VARTYPE_BYTE" ::= { dts4160OscTimeInfo 2 } dts4160OscTimeInfoLockedState OBJECT-TYPE SYNTAX INTEGER { notlocked (0), locked (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the oscillator tracking. 0 = Not locked 1 = Locked" REFERENCE "OFS_OSCINFO_LOCK_STATE, 1, VARTYPE_BYTE" ::= { dts4160OscTimeInfo 3 } -- ----------------------------------------------------------------- -- -- System - Power -- ----------------------------------------------------------------- -- dts4160SystemPower OBJECT IDENTIFIER ::= { dts4160System 40 } dts4160SupplyVoltage1 OBJECT-TYPE SYNTAX Gauge32 (0..30000) UNITS "Milli volts (mV DC)" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured voltage of the power supply 1. The value is in milli volts (mV DC). Range 0 .. 30000 mV" REFERENCE "OFS_POWER_U1_MV, 4, VARTYPE_DWORD" ::= { dts4160SystemPower 1 } dts4160SupplyVoltage2 OBJECT-TYPE SYNTAX Gauge32 (0..30000) UNITS "Milli volts (mV DC)" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured voltage of the power supply 2. The value is in milli volts (mV DC). Range 0 .. 30000 mV" REFERENCE "OFS_POWER_U2_MV, 4, VARTYPE_DWORD" ::= { dts4160SystemPower 2 } -- ----------------------------------------------------------------- -- -- System - Maintenance -- ----------------------------------------------------------------- -- dts4160SystemMaintenance OBJECT IDENTIFIER ::= { dts4160System 50 } dts4160SysUpdateCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), runRamDirUpdateProcess (1), runUSBUpdateProcess(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "System software update command variable. After the update proccess the device will do a restart. 0: No action 1: Run /ram directory update proccess 2: Run USB update proccess" REFERENCE "OFS_SYSTEM_UPDATE, 1, VARTYPE_BYTE" ::= { dts4160SystemMaintenance 1 } dts4160SysBackupCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), runBackupProcess (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "System backup command variable. The current configuration files will be copied internal. 0: No action 1: Run local backup proccess" REFERENCE "OFS_SYSTEM_BACKUP, 1, VARTYPE_BYTE" ::= { dts4160SystemMaintenance 2 } dts4160SysRestoreCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), runRestoreProcess (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "System restore command variable. Restores previous created configuration files copies (by the local backup command). 0: No Action 1: Run local restore proccess" REFERENCE "OFS_SYSTEM_RESTORE, 1, VARTYPE_BYTE" ::= { dts4160SystemMaintenance 3 } dts4160SysRestartCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), reboot (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "System reboot command variable. 0: No action 1: Reboot" REFERENCE "OFS_SYSTEM_RESTART, 1, VARTYPE_BYTE" ::= { dts4160SystemMaintenance 4 } dts4160SysDefaultCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), runDefaltRestoreProcess (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "System restore command variable. Restores system to default. 0: No action 1: Run default restore proccess" REFERENCE "OFS_SYSTEM_DEFAULT, 1, VARTYPE_BYTE" ::= { dts4160SystemMaintenance 5 } dts4160SysAllChanged OBJECT-TYPE SYNTAX INTEGER { noAction (0), readAllConfigFiles (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reread all configuration files" REFERENCE "OFS_SYSTEM_ALL_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160SystemMaintenance 6 } dts4160SysCopyFiles OBJECT-TYPE SYNTAX INTEGER { noAction (0), copyFilesToFlash (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Copies all telegram files and switching program files from /ram and USB to the internal flash directory." REFERENCE "OFS_SYSTEM_CPY_FILES, 1, VARTYPE_BYTE" ::= { dts4160SystemMaintenance 7 } -- ----------------------------------------------------------------- -- -- System - Versions -- ----------------------------------------------------------------- -- dts4160SystemVersions OBJECT IDENTIFIER ::= { dts4160System 60 } dts4160verFPGA OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the FPGA firmware." REFERENCE "OFS_VER_FPGA, 0, VARTYPE_STRING" ::= { dts4160SystemVersions 1 } dts4160verFPGADriver OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the FPGA linux driver software." REFERENCE "OFS_VER_DTS_FPGA, 0, VARTYPE_STRING" ::= { dts4160SystemVersions 2 } dts4160verModule OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the linux time driver software." REFERENCE "OFS_VER_DTS_TIME, 59, VARTYPE_STRING" ::= { dts4160SystemVersions 3 } dts4160verLangResource OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the menu text resource file." REFERENCE "OFS_VER_LANGUAGE, 59, VARTYPE_STRING" ::= { dts4160SystemVersions 4 } dts4160verTimezoneTable OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the time zone tables." REFERENCE "OFS_VER_SEASON, 59, VARTYPE_STRING" ::= { dts4160SystemVersions 5 } dts4160verNTP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the NTP server." REFERENCE "OFS_VER_NTPD, 59, VARTYPE_STRING" ::= { dts4160SystemVersions 6 } dts4160verLinux OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the linux kernel." REFERENCE "OFS_VER_KERNEL, 59, VARTYPE_STRING" ::= { dts4160SystemVersions 7 } dts4160verCLIShell OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the command line shell." REFERENCE "OFS_VER_BUSYBOX, 59, VARTYPE_STRING" ::= { dts4160SystemVersions 8 } dts4160verRootFS OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the root file system." REFERENCE "OFS_VER_FILESYS, 59, VARTYPE_STRING" ::= { dts4160SystemVersions 9 } dts4160verSNMPMasterAgent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the SNMP master agent." REFERENCE "OFS_VER_SNMPMASTER, 59, VARTYPE_STRING" ::= { dts4160SystemVersions 10 } dts4160verSNMPSubAgent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the SNMP sub agent." REFERENCE "OFS_VER_SNMPSUBAGENT, 59, VARTYPE_STRING" ::= { dts4160SystemVersions 11 } dts4160verApplication OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the DTS application software." REFERENCE "OFS_VER_DTS4160, 59, VARTYPE_STRING" ::= { dts4160SystemVersions 12 } dts4160verPTP4L OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the ptp software." REFERENCE "OFS_VER_PTP4L, 59, VARTYPE_STRING" ::= { dts4160SystemVersions 13 } -- ----------------------------------------------------------------- -- -- System - Product information -- ----------------------------------------------------------------- -- dts4160ProdInfo OBJECT IDENTIFIER ::= { dts4160System 70 } dts4160ProdInfoHWCode OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "DTS device type code. 1.Byte = 4 (Hardware), 8 (Software) 2.Byte = x (device main group) 3.Byte = y (device function) 4.Byte = z (device variants) 5.-8.Byte = reserved DTS4160 -> 4.1.6.0 x=1,y=6,z=0" REFERENCE "OFS_PROD_HW_CODE, 8, VARTYPE_BYTEARR" ::= { dts4160ProdInfo 1 } dts4160ProdInfoHWName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..59)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the DTS device (type)." REFERENCE "OFS_PROD_HW_NAME, 59, VARTYPE_STRING" ::= { dts4160ProdInfo 2 } dts4160ProdInfoHWRevision OBJECT-TYPE SYNTAX DisplayString (SIZE(1..19)) MAX-ACCESS read-only STATUS current DESCRIPTION "Hardware revision of the DTS device." REFERENCE "OFS_PROD_HW_VER, 19, VARTYPE_STRING" ::= { dts4160ProdInfo 3 } dts4160ProdInfoProdNo OBJECT-TYPE SYNTAX DisplayString (SIZE(1..19)) MAX-ACCESS read-only STATUS current DESCRIPTION "Product number (serial number) of the DTS device." REFERENCE "OFS_PROD_PROD_NR, 20, VARTYPE_STRING" ::= { dts4160ProdInfo 4 } dts4160ProdInfoArticleNo OBJECT-TYPE SYNTAX DisplayString (SIZE(1..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Article number of the DTS device." REFERENCE "OFS_PROD_ART_NR, 8, VARTYPE_STRING" ::= { dts4160ProdInfo 5 } dts4160ProdInfoFirmwareVer OBJECT-TYPE SYNTAX DisplayString (SIZE(1..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "Firmware version of the DTS device." REFERENCE "OFS_PROD_FIRMW_VER, 40, VARTYPE_STRING" ::= { dts4160ProdInfo 6 } dts4160SysConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "System configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_GEN_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160System 100 } dts4160SysConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_GEN_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160System 101 } -- ----------------------------------------------------------------- -- -- Network -- ----------------------------------------------------------------- -- dts4160Network OBJECT IDENTIFIER ::= { dts4160MIB 2 } -- ----------------------------------------------------------------- -- -- Network - Network Ports -- ----------------------------------------------------------------- -- dts4160NetworkPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4160NetworkPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with network port configuration" REFERENCE "OFS_NW1_LINK, 1, 4, 2, 11, {{36,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4160Network 10} dts4160NetworkPortEntry OBJECT-TYPE SYNTAX Dts4160NetworkPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4160NetworkPortIndex } ::= { dts4160NetworkPortTable 1 } Dts4160NetworkPortEntry ::= SEQUENCE { dts4160NetworkPortIndex Integer32, dts4160NetworkPortLinkMode Unsigned32, dts4160NetworkPortPTPSupport EnabledDisabled, dts4160NetworkPortPTPConfig Integer32, dts4160NetworkPortLAGSupport EnabledDisabled, dts4160NetworkPortLAGConfig Integer32, dts4160NetworkPortSyncESupport EnabledDisabled, dts4160NetworkPortSyncEConfig Integer32, dts4160NetworkPortCfgChanged Unsigned32, dts4160NetworkPortConfigCmd INTEGER, dts4160NetworkPortConfigChangedTime TimeTicks } dts4160NetworkPortIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the network port configuration entry (only virtual). Valid index = 1 .. 4" ::= { dts4160NetworkPortEntry 1 } dts4160NetworkPortLinkMode OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Ethernet link mode Bit 0 - 1: speed 2: 100Mbit 3: 1000Mbit Bit5: 1 = full duplex, 0 = half duplex Bit7: 1 = auto negotiation enabled, 0 = disabled" ::= { dts4160NetworkPortEntry 2 } dts4160NetworkPortPTPSupport OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION " PTP Output support. 0: Port has no PTP support 1: Port supports PTP" ::= { dts4160NetworkPortEntry 3 } dts4160NetworkPortPTPConfig OBJECT-TYPE SYNTAX Integer32 (0..12) MAX-ACCESS read-write STATUS current DESCRIPTION "Index from the PTP configuration entry table. 0 : PTP disable 1 .. 3 : Index PTP configuration table entry" ::= { dts4160NetworkPortEntry 4 } dts4160NetworkPortLAGSupport OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION " LAG Output support. 0 : Port has no LAG support 1 : Port supports LAG" ::= { dts4160NetworkPortEntry 5 } dts4160NetworkPortLAGConfig OBJECT-TYPE SYNTAX Integer32 (0..4) MAX-ACCESS read-write STATUS current DESCRIPTION "Index from the LAG configuration entry table. 0: LAG disable 1 .. 1 : Index LAG configuration table entry" ::= { dts4160NetworkPortEntry 6 } dts4160NetworkPortSyncESupport OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION " SyncE ESMC Output support. 0 : Port has no SyncE ESMC support 1 : Port supports SyncE ESMC" ::= { dts4160NetworkPortEntry 7 } dts4160NetworkPortSyncEConfig OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration of ESMC output. 0: ESMC disable 1: ESMC enable" ::= { dts4160NetworkPortEntry 8 } dts4160NetworkPortCfgChanged OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Network port configuration changed variable. 0: No configuration change 1: Configuration has changed" ::= { dts4160NetworkPortEntry 9 } dts4160NetworkPortConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Network port configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" ::= { dts4160NetworkPortEntry 10 } dts4160NetworkPortConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." ::= { dts4160NetworkPortEntry 11 } -- ----------------------------------------------------------------- -- -- Network - LAG Interfaces -- ----------------------------------------------------------------- -- dts4160NetworkLAGIFTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4160NetworkLAGIFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with network link aggragation configuration" REFERENCE "OFS_NWLAG1_MODE, 1, 1, 2, 7, {{28,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4160Network 20} dts4160NetworkLAGIFEntry OBJECT-TYPE SYNTAX Dts4160NetworkLAGIFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4160NetworkLAGIFIndex } ::= { dts4160NetworkLAGIFTable 1 } Dts4160NetworkLAGIFEntry ::= SEQUENCE { dts4160NetworkLAGIFIndex Integer32, dts4160NetworkLAGIFMode Unsigned32, dts4160NetworkLAGIFLACPRate Unsigned32, dts4160NetworkLAGIFMiiMon Unsigned32, dts4160NetworkLAGIFCfgChanged Unsigned32, dts4160NetworkLAGIFConfigCmd INTEGER, dts4160NetworkLAGIFConfigChangedTime TimeTicks } dts4160NetworkLAGIFIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the LAG interface configuration entry (only virtual). Valid index = 1 .. 1" ::= { dts4160NetworkLAGIFEntry 1 } dts4160NetworkLAGIFMode OBJECT-TYPE SYNTAX Unsigned32 (0..6) MAX-ACCESS read-write STATUS current DESCRIPTION "Link Aggregation Mode. 0: balance-rr 1: active-backup 2: balance-xor 3: broadcast 4: 802.3ad 5: balance-tlb 6: balance-alb" ::= { dts4160NetworkLAGIFEntry 2 } dts4160NetworkLAGIFLACPRate OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Rate to transmit LACPDU packets in 802.3ad mode. 0: slow, transmit LACPDUs every 30 seconds. 1: fast, transmit LACPDUs every 1 second." ::= { dts4160NetworkLAGIFEntry 3 } dts4160NetworkLAGIFMiiMon OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "MII link monitoring frequency in milliseconds. 0: disable 1-255: monitoring frequency in milliseconds" ::= { dts4160NetworkLAGIFEntry 4 } dts4160NetworkLAGIFCfgChanged OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "LAG Network interface configuration changed variable. 0: No configuration change 1: Configuration has changed" ::= { dts4160NetworkLAGIFEntry 5 } dts4160NetworkLAGIFConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "LAG Network configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" ::= { dts4160NetworkLAGIFEntry 6 } dts4160NetworkLAGIFConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." ::= { dts4160NetworkLAGIFEntry 7 } -- ----------------------------------------------------------------- -- -- Network - Network IP Configuration -- ----------------------------------------------------------------- -- dts4160NetworkIPCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4160NetworkIPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with network interface configuration" REFERENCE "OFS_NW1_IP_MODE, 1, 4, 2, 34, {{1216,VARTYPE_STRUCTARR}, {4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING}, {4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING}, {4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}, {64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}, {64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER} ,{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4160Network 30} dts4160NetworkIPCfgEntry OBJECT-TYPE SYNTAX Dts4160NetworkIPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4160NetworkIPCfgIndex } ::= { dts4160NetworkIPCfgTable 1 } Dts4160NetworkIPCfgEntry ::= SEQUENCE { dts4160NetworkIPCfgIndex Integer32, dts4160NetworkIPCfgMode Unsigned32, dts4160NetworkIPCfgIP1v4 DTSNetworkName, dts4160NetworkIPCfgIPMask1v4 DTSNetworkName, dts4160NetworkIPCfgIPGateway1v4 DTSNetworkName, dts4160NetworkIPCfgIP2v4 DTSNetworkName, dts4160NetworkIPCfgIPMask2v4 DTSNetworkName, dts4160NetworkIPCfgIPGateway2v4 DTSNetworkName, dts4160NetworkIPCfgDHCPMode EnabledDisabled, dts4160NetworkIPCfgHostname DisplayString, dts4160NetworkIPCfgDomain DisplayString, dts4160NetworkIPCfgIPNameserver DTSNetworkName, dts4160NetworkIPCfgIPv6AutoConf EnabledDisabled, dts4160NetworkIPCfgIPv6DHCPMode EnabledDisabled, dts4160NetworkIPCfgIPv6Addr1 DTSNetworkName, dts4160NetworkIPCfgIPv6Prefix1 Unsigned32, dts4160NetworkIPCfgIPv6Gateway1 DTSNetworkName, dts4160NetworkIPCfgIPv6Addr2 DTSNetworkName, dts4160NetworkIPCfgIPv6Prefix2 Unsigned32, dts4160NetworkIPCfgIPv6Gateway2 DTSNetworkName, dts4160NetworkIPCfgIPv6Nameserver DTSNetworkName, dts4160NetworkIPCfgVLANMember1 Unsigned32, dts4160NetworkIPCfgVLANMember2 Unsigned32, dts4160NetworkIPCfgIP1v4RouteDest1 DTSNetworkName, dts4160NetworkIPCfgIP1v4RoutePrefix1 Unsigned32, dts4160NetworkIPCfgIP1v4RouteDest2 DTSNetworkName, dts4160NetworkIPCfgIP1v4RoutePrefix2 Unsigned32, dts4160NetworkIPCfgIP2v4RouteDest1 DTSNetworkName, dts4160NetworkIPCfgIP2v4RoutePrefix1 Unsigned32, dts4160NetworkIPCfgIP2v4RouteDest2 DTSNetworkName, dts4160NetworkIPCfgIP2v4RoutePrefix2 Unsigned32, dts4160NetworkIPCfgChanged Unsigned32, dts4160NetworkIPCfgConfigCmd INTEGER, dts4160NetworkIPCfgConfigChangedTime TimeTicks } dts4160NetworkIPCfgIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the network interface configuration entry (only virtual). Valid index = 1 .. 4" ::= { dts4160NetworkIPCfgEntry 1 } dts4160NetworkIPCfgMode OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Assigned network port / LAG interface. 0: no assignment. 1 .. 16: Network Port 65 .. 68: LAG Interface" ::= { dts4160NetworkIPCfgEntry 2 } dts4160NetworkIPCfgIP1v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx)" ::= { dts4160NetworkIPCfgEntry 3 } dts4160NetworkIPCfgIPMask1v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 subnet mask (xxx.xxx.xxx.xxx)" ::= { dts4160NetworkIPCfgEntry 4 } dts4160NetworkIPCfgIPGateway1v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) of the gateway" ::= { dts4160NetworkIPCfgEntry 5 } dts4160NetworkIPCfgIP2v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx)" ::= { dts4160NetworkIPCfgEntry 6 } dts4160NetworkIPCfgIPMask2v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 subnet mask (xxx.xxx.xxx.xxx)" ::= { dts4160NetworkIPCfgEntry 7 } dts4160NetworkIPCfgIPGateway2v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) of the gateway" ::= { dts4160NetworkIPCfgEntry 8 } dts4160NetworkIPCfgDHCPMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP mode. 0: DHCP disabled 1: DHCP enabled" ::= { dts4160NetworkIPCfgEntry 9 } dts4160NetworkIPCfgHostname OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Hostname of the DTS." ::= { dts4160NetworkIPCfgEntry 10 } dts4160NetworkIPCfgDomain OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Domain name of the DTS." ::= { dts4160NetworkIPCfgEntry 11 } dts4160NetworkIPCfgIPNameserver OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) of the nameserver" ::= { dts4160NetworkIPCfgEntry 12 } dts4160NetworkIPCfgIPv6AutoConf OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "Auto configuration mode IP V6. 0: Auto conf disabled 1: Auto conf enabled" ::= { dts4160NetworkIPCfgEntry 13 } dts4160NetworkIPCfgIPv6DHCPMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP mode IP V6. 0: DHCP disabled 1: DHCP enabled" ::= { dts4160NetworkIPCfgEntry 14 } dts4160NetworkIPCfgIPv6Addr1 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 network address 1 (xxxx:xxxx::xxxx)" ::= { dts4160NetworkIPCfgEntry 15 } dts4160NetworkIPCfgIPv6Prefix1 OBJECT-TYPE SYNTAX Unsigned32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 subnet prefix 1" ::= { dts4160NetworkIPCfgEntry 16 } dts4160NetworkIPCfgIPv6Gateway1 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 network address (xxxx:xxxx::xxxx) of the gateway 1" ::= { dts4160NetworkIPCfgEntry 17 } dts4160NetworkIPCfgIPv6Addr2 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 network address 1 (xxxx:xxxx::xxxx)" ::= { dts4160NetworkIPCfgEntry 18 } dts4160NetworkIPCfgIPv6Prefix2 OBJECT-TYPE SYNTAX Unsigned32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 subnet prefix 1" ::= { dts4160NetworkIPCfgEntry 19 } dts4160NetworkIPCfgIPv6Gateway2 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 network address (xxxx:xxxx::xxxx) of the gateway 2" ::= { dts4160NetworkIPCfgEntry 20 } dts4160NetworkIPCfgIPv6Nameserver OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 network address (xxxx:xxxx::xxxx) of the nameserver" ::= { dts4160NetworkIPCfgEntry 21 } dts4160NetworkIPCfgVLANMember1 OBJECT-TYPE SYNTAX Unsigned32 (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN Configuration 1. 0: VLAN disabled 1 .. 8 : VLAN configuration entry" ::= { dts4160NetworkIPCfgEntry 22 } dts4160NetworkIPCfgVLANMember2 OBJECT-TYPE SYNTAX Unsigned32 (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN Configuration 2. 0: VLAN disabled 1 .. 8 : VLAN configuration entry" ::= { dts4160NetworkIPCfgEntry 23 } dts4160NetworkIPCfgIP1v4RouteDest1 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route destination 1 (xxx.xxx.xxx.xxx)" ::= { dts4160NetworkIPCfgEntry 24 } dts4160NetworkIPCfgIP1v4RoutePrefix1 OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route prefix 1" ::= { dts4160NetworkIPCfgEntry 25 } dts4160NetworkIPCfgIP1v4RouteDest2 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route destination 2 (xxx.xxx.xxx.xxx)" ::= { dts4160NetworkIPCfgEntry 26 } dts4160NetworkIPCfgIP1v4RoutePrefix2 OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route prefix 2" ::= { dts4160NetworkIPCfgEntry 27 } dts4160NetworkIPCfgIP2v4RouteDest1 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route destination 1 (xxx.xxx.xxx.xxx)" ::= { dts4160NetworkIPCfgEntry 28 } dts4160NetworkIPCfgIP2v4RoutePrefix1 OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route prefix 1" ::= { dts4160NetworkIPCfgEntry 29 } dts4160NetworkIPCfgIP2v4RouteDest2 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route destination 2 (xxx.xxx.xxx.xxx)" ::= { dts4160NetworkIPCfgEntry 30 } dts4160NetworkIPCfgIP2v4RoutePrefix2 OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route prefix 2" ::= { dts4160NetworkIPCfgEntry 31 } dts4160NetworkIPCfgChanged OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Network interface configuration changed variable. 0: No configuration change 1: Configuration has changed" ::= { dts4160NetworkIPCfgEntry 32 } dts4160NetworkIPCfgConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Network interface 0 configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" ::= { dts4160NetworkIPCfgEntry 33 } dts4160NetworkIPCfgConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." ::= { dts4160NetworkIPCfgEntry 34 } -- ----------------------------------------------------------------- -- -- Network - Network VLAN Configuration -- ----------------------------------------------------------------- -- dts4160NetworkVLANCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4160NetworkVLANCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with network VLAN configuration" REFERENCE "OFS_NWVLAN1_NAME, 1, 8, 2, 15, {{120,VARTYPE_STRUCTARR}, {64,VARTYPE_STRING},{4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}}" ::= { dts4160Network 50} dts4160NetworkVLANCfgEntry OBJECT-TYPE SYNTAX Dts4160NetworkVLANCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4160NetworkVLANCfgIndex } ::= { dts4160NetworkVLANCfgTable 1 } Dts4160NetworkVLANCfgEntry ::= SEQUENCE { dts4160NetworkVLANCfgIndex Integer32, dts4160NetworkVLANCfgName DisplayString, dts4160NetworkVLANCfgID Unsigned32, dts4160NetworkVLANQosBK Unsigned32, dts4160NetworkVLANQosBE Unsigned32, dts4160NetworkVLANQosEE Unsigned32, dts4160NetworkVLANQosCA Unsigned32, dts4160NetworkVLANQosVI Unsigned32, dts4160NetworkVLANQosVO Unsigned32, dts4160NetworkVLANQosIC Unsigned32, dts4160NetworkVLANQosNC Unsigned32, dts4160NetworkVLANQosPCP Unsigned32, dts4160NetworkVLANCfgChanged Unsigned32, dts4160NetworkVLANConfigCmd INTEGER, dts4160NetworkVLANConfigChangedTime TimeTicks } dts4160NetworkVLANCfgIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the VLAN configuration entry (only virtual). Valid index = 1 .. 8" ::= { dts4160NetworkVLANCfgEntry 1 } dts4160NetworkVLANCfgName OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN descriptive name" ::= { dts4160NetworkVLANCfgEntry 2 } dts4160NetworkVLANCfgID OBJECT-TYPE SYNTAX Unsigned32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN ID: 1 .. 4094" ::= { dts4160NetworkVLANCfgEntry 3 } dts4160NetworkVLANQosBK OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Background (BK) Priority: 0 .. 7" ::= { dts4160NetworkVLANCfgEntry 4 } dts4160NetworkVLANQosBE OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Best Effort (BE) Priority: 0 .. 7" ::= { dts4160NetworkVLANCfgEntry 5 } dts4160NetworkVLANQosEE OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Excellent Effort (EE) Priority: 0 .. 7" ::= { dts4160NetworkVLANCfgEntry 6 } dts4160NetworkVLANQosCA OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Critical Applications (CA) Priority: 0 .. 7" ::= { dts4160NetworkVLANCfgEntry 7 } dts4160NetworkVLANQosVI OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Video (VI) Priority: 0 .. 7" ::= { dts4160NetworkVLANCfgEntry 8 } dts4160NetworkVLANQosVO OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "BTraffic type: Voice (VO) Priority: 0 .. 7" ::= { dts4160NetworkVLANCfgEntry 9 } dts4160NetworkVLANQosIC OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Internetwork Control (IC) Priority: 0 .. 7" ::= { dts4160NetworkVLANCfgEntry 10 } dts4160NetworkVLANQosNC OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Network Control (NC) Priority: 0 .. 7" ::= { dts4160NetworkVLANCfgEntry 11 } dts4160NetworkVLANQosPCP OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN QoSPCP Priority: 0 .. 7" ::= { dts4160NetworkVLANCfgEntry 12 } dts4160NetworkVLANCfgChanged OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Network interface configuration changed variable. 0: No configuration change 1: Configuration has changed" ::= { dts4160NetworkVLANCfgEntry 13 } dts4160NetworkVLANConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Network VLAN configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" ::= { dts4160NetworkVLANCfgEntry 14 } dts4160NetworkVLANConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last VLAN configuration change." ::= { dts4160NetworkVLANCfgEntry 15 } -- ----------------------------------------------------------------- -- -- Network Services -- ----------------------------------------------------------------- -- dts4160NetServices OBJECT IDENTIFIER ::= { dts4160MIB 3 } dts4160TelnetMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "Telnet mode. 0: disabled, 1: enabled" REFERENCE "OFS_SERVICE_TELNET, 1, VARTYPE_BYTE" ::= { dts4160NetServices 1 } dts4160FTPMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "FTP mode. 0: disabled, 1: enabled" REFERENCE "OFS_SERVICE_FTP, 1, VARTYPE_BYTE" ::= { dts4160NetServices 2 } dts4160SSHMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "SSH mode. 0: disabled, 1: enabled" REFERENCE "OFS_SERVICE_SSH, 1, VARTYPE_BYTE" ::= { dts4160NetServices 3 } dts4160NetServicesConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Network services configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_SERVICE_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160NetServices 100 } dts4160NetServicesConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_SERVICE_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160NetServices 101 } -- ----------------------------------------------------------------- -- -- Time handling -- ----------------------------------------------------------------- -- dts4160TimeHandling OBJECT IDENTIFIER ::= { dts4160MIB 4 } -- ----------------------------------------------------------------- -- -- Time handling - Time source -- ----------------------------------------------------------------- -- dts4160TimeSource OBJECT IDENTIFIER ::= { dts4160TimeHandling 1 } dts4160TimeSourcePriority OBJECT IDENTIFIER ::= { dts4160TimeSource 1 } dts4160TimeSourcePriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4160TimeSourcePriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with time sources" REFERENCE "OFS_TIME_TS_PRIORITY1, 1, 6, 2, 3, {{12,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4160TimeSourcePriority 1 } dts4160TimeSourcePriorityEntry OBJECT-TYPE SYNTAX Dts4160TimeSourcePriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4160TimeSourcePriorityIndex } ::= { dts4160TimeSourcePriorityTable 1 } Dts4160TimeSourcePriorityEntry ::= SEQUENCE { dts4160TimeSourcePriorityIndex Integer32, dts4160TimeSourcePriorityType INTEGER, dts4160TimeSourcePriorityAcc Unsigned32 } dts4160TimeSourcePriorityIndex OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the time source priority table (only virtual). Valid index = 1 .. 6" ::= { dts4160TimeSourcePriorityEntry 1 } dts4160TimeSourcePriorityType OBJECT-TYPE SYNTAX INTEGER { none (0), gnss (1), redundantlink (2), ptp (3), gnssdcf(4), e1(5), frequencyin(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configured time source: 0: none 1: GNSS 2: Redundant Link 3: PTP 4: GNSS-DCF 5: E1 6: Frequency-In (F-In)" ::= { dts4160TimeSourcePriorityEntry 2 } dts4160TimeSourcePriorityAcc OBJECT-TYPE SYNTAX Unsigned32 (100..100000) UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Unused, future parameter" ::= { dts4160TimeSourcePriorityEntry 3 } dts4160TimeSourcePriorityMode OBJECT-TYPE SYNTAX INTEGER { auto (0), manual (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configured time source priority mode: 0: auto, priority defined automatically by dts analyzing the sources 1: manual, priority defined by user" REFERENCE "OFS_TIME_TS_MODE, 1, VARTYPE_BYTE" ::= { dts4160TimeSourcePriority 2 } dts4160TSTimezone OBJECT-TYPE SYNTAX Unsigned32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Time zone for the selected time source (excluding NTP). 0: UTC 1-99: See user manual 800870, time zone table" REFERENCE "OFS_TIME_SOURCE_TZ, 1, VARTYPE_BYTE" ::= { dts4160TimeSource 2 } dts4160TSStratumMode OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Configured stratum level of the DTS. 0: Automatic Stratum level calculation 1-15: Fix Stratum level" REFERENCE "OFS_TIME_CSTRATUM, 1, VARTYPE_BYTE" ::= { dts4160TimeSource 3 } dts4160TSStratumErrorLimit OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Stratum level limit to generate an alarm. Valid range 1-16" REFERENCE "OFS_TIME_ESTRATUM, 1, VARTYPE_BYTE" ::= { dts4160TimeSource 4 } dts4160TSTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..2160) UNITS "minute" MAX-ACCESS read-write STATUS current DESCRIPTION "Time duration to set an alarm after a time source failure. Range 1-2160 minutes" REFERENCE "OFS_TIME_SOURCE_TO, 4, VARTYPE_DWORD" ::= { dts4160TimeSource 5 } dts4160TSStratumTimeout1 OBJECT-TYPE SYNTAX Unsigned32 (1..9999) UNITS "hour" MAX-ACCESS read-write STATUS current DESCRIPTION "Time duration to increase the stratum level from 0 to 16 in case of a source failure. Range 1-9999 hours" REFERENCE "OFS_TIME_STRATUM_TO, 4, VARTYPE_DWORD" ::= { dts4160TimeSource 6 } dts4160TSOffsetPerStratum OBJECT-TYPE SYNTAX Unsigned32 (0..40000) UNITS "milli seconds (ms)" MAX-ACCESS read-write STATUS current DESCRIPTION "Time offset to calculate the stratum level in case of a resumed time synchronisation. Range 0-40000 ms E.g. -configured offset per stratum 30 ms -measured offset 150 ms -> Stratum level = 150/30 = 5" REFERENCE "OFS_TIME_STRATUM_OFS, 4, VARTYPE_DWORD" ::= { dts4160TimeSource 7 } dts4160TSStratumChangeSourceFail OBJECT-TYPE SYNTAX INTEGER { default (0), immediate (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Behavior of Stratum after time source lost: 0: DEFAULT - Default decrease of stratum level. 1: IMMEDIATE - Stratum is decreased immediate after time source lost." REFERENCE "OFS_TIME_STRATUM_CHANGE_SOURCE_FAIL, 4, VARTYPE_DWORD" ::= { dts4160TimeSource 8 } dts4160TSMaxOffsetForTimeValid OBJECT-TYPE SYNTAX Unsigned32 (100..250000000) UNITS "nano seconds (ns)" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum time offset to set time valid at startup. Range 100-250000000 ns" REFERENCE "OFS_TIME_OK_OFS, 4, VARTYPE_DWORD" ::= { dts4160TimeSource 9 } dts4160TSAdjustmentMode OBJECT-TYPE SYNTAX INTEGER { follow (0), set (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Behavior of the time adjusment: 0: FOLLOW - Adjust the time with a configured limited speed. Takes a longer time to correct the time offset. 1: SET - Adjust the time with some big steps." REFERENCE "OFS_TIME_COR_MODE, 1, VARTYPE_BYTE" ::= { dts4160TimeSource 10 } dts4160TSMaxAdjustmentSpeed OBJECT-TYPE SYNTAX Unsigned32 (0..10000000) UNITS "nano seconds per seconds (ns/s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum adjusment speed in mode FOLLOW Range 0..10000000 ns/s" REFERENCE "OFS_TIME_MAX_CORR, 4, VARTYPE_DWORD" ::= { dts4160TimeSource 11 } dts4160TSQuartzType OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of the DTS core. Range 0..255 (default 1)" REFERENCE "OFS_TIME_QUARTZ_TYP, 1, VARTYPE_BYTE" ::= { dts4160TimeSource 12 } dts4160TSOffsetSynchOnly OBJECT-TYPE SYNTAX Unsigned32 (0 | 1000..5000000) UNITS "nano seconds (ns)" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum time offset to adjust the time. If the time offset is larger than this value an alarm is generated and the time is no longer adjusted. Range 1000-5000000 ns (1us-5ms) 0: Synchronisation only is disabled" REFERENCE "OFS_TIME_SYN_ONLY, 4, VARTYPE_DWORD" ::= { dts4160TimeSource 13 } dts4160TSLeapSecMode OBJECT-TYPE SYNTAX INTEGER { none (0), insert1Second (1), auto (2), cutOff1Second (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of the leap second 0: None 1: Insert 1 second at the leap date/time 2: Auto 255: Cut off 1 second at the leap date/time" REFERENCE "OFS_TIME_LEAP_SEC_MODE, 1, VARTYPE_BYTE" ::= { dts4160TimeSource 14 } dts4160TSLeapSecDate OBJECT-TYPE SYNTAX DisplayString UNITS "Date/Time string hh:mm:ss DD.MM.YY" MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the system time (UTC) of the leap second. Format: ASCII string = hh:mm:ss DD.MM.YY" REFERENCE "OFS_TIME_LEAP_SEC_DATE, 17, VARTYPE_STRING" ::= { dts4160TimeSource 15 } dts4160TSRTCMode OBJECT-TYPE SYNTAX INTEGER { off (0), on (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "RTC (Real Time Clock) mode: 0: off 1: on" REFERENCE "OFS_TIME_RTC_MODE, 1, VARTYPE_BYTE" ::= { dts4160TimeSource 16 } dts4160TSAlarmBigOffset OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) UNITS "nano seconds (ns)" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum time offset to source for alarm Time source big offset. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_TIME_AL_BIG_OFS, 4, VARTYPE_DWORD" ::= { dts4160TimeSource 17 } dts4160TSConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Time source configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_TIME_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160TimeSource 100 } dts4160TSConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_TIME_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160TimeSource 101 } -- ----------------------------------------------------------------- -- -- Time handling - GNSS config -- ----------------------------------------------------------------- -- dts4160TimeGNSSConfig OBJECT IDENTIFIER ::= { dts4160TimeHandling 10 } dts4160GNSSConstellationMode OBJECT-TYPE SYNTAX INTEGER { gnssGPS (0), gnssGLONASS (2), gnssBeiDou (3), gnssGPSGLONASS (7), gnssGPSBeiDou (8), gnssGLONASSBeiDou (11) } MAX-ACCESS read-write STATUS current DESCRIPTION "GNSS constellation mode used for navigation solution 0: GPS 2: GLONASS 3: BeiDou 7: GPS & GLONASS 8: GPS & BeiDou 11: GLONASS & BeiDou" REFERENCE "OFS_GNSS_CONSTELLATION_MODE, 1, VARTYPE_BYTE" ::= { dts4160TimeGNSSConfig 1 } dts4160GNSSMaxOffset OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Max GNSS offset to generate an alarm. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_GNSS_ALARM_SOURCE_OFFSET, 4, VARTYPE_DWORD" ::= { dts4160TimeGNSSConfig 2 } dts4160GNSSSurveyInMode OBJECT-TYPE SYNTAX INTEGER { disableFixedPosition (0), fixedPosition (1), manualPosition (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Survey mode for position 0: Disabled, no Fixed Position 1: Fixed Position 2: Manual position" REFERENCE "OFS_GNSS_SURVEYIN_MODE, 1, VARTYPE_BYTE" ::= { dts4160TimeGNSSConfig 10 } dts4160GNSSSurveyInObservationTime OBJECT-TYPE SYNTAX Unsigned32 (0..604800) UNITS "seconds (s)" MAX-ACCESS read-write STATUS current DESCRIPTION "Fixed position minimum observation time (sec)" REFERENCE "OFS_GNSS_SURVEYIN_OBS_TIME, 4, VARTYPE_DWORD" ::= { dts4160TimeGNSSConfig 11 } dts4160GNSSSurveyInObservationAccuracy OBJECT-TYPE SYNTAX Unsigned32 (0..100000) UNITS "millimeter (mm)" MAX-ACCESS read-write STATUS current DESCRIPTION "Fixed position minimum position accuracy (mm)" REFERENCE "OFS_GNSS_SURVEYIN_POS_ACC, 4, VARTYPE_DWORD" ::= { dts4160TimeGNSSConfig 12 } dts4160GNSSSurveyInCommand OBJECT-TYPE SYNTAX INTEGER { noAction (0), deletePositionData (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Survey mode for position 0: None 1: Delete Fixed Position data" REFERENCE "OFS_GNSS_SURVEYIN_POS_CMD, 1, VARTYPE_BYTE" ::= { dts4160TimeGNSSConfig 19 } dts4160GNSSAntennaDelay OBJECT-TYPE SYNTAX Unsigned32 (0..1000) UNITS "nano seconds (ns)" MAX-ACCESS read-write STATUS current DESCRIPTION "Antenna cable delay in nano secconds" REFERENCE "OFS_GNSS_ANTENNA_DELAY, 4, VARTYPE_DWORD" ::= { dts4160TimeGNSSConfig 20 } dts4160GNSSAntennaSupply OBJECT-TYPE SYNTAX INTEGER { voltage5000mV (0), voltage3300mV (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Antenna power supply voltage" REFERENCE "OFS_GNSS_ANTENNA_PWR_SUPPLY, 1, VARTYPE_BYTE" ::= { dts4160TimeGNSSConfig 21 } dts4160GNSSSensSVCount OBJECT-TYPE SYNTAX Unsigned32 (1..20) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum number of satellites required for navigation" REFERENCE "OFS_GNSS_SENS_SV_COUNT, 1, VARTYPE_BYTE" ::= { dts4160TimeGNSSConfig 30 } dts4160GNSSSensSVSigLevel OBJECT-TYPE SYNTAX Unsigned32 (20..40) UNITS "dBHz" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum signal level of satellites required for navigation" REFERENCE "OFS_GNSS_SENS_SV_SIGNAL_LEVEL, 1, VARTYPE_BYTE" ::= { dts4160TimeGNSSConfig 31 } dts4160GNSSConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "GNSS configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_GNSS_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160TimeGNSSConfig 100 } dts4160GNSSConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_GNSS_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160TimeGNSSConfig 101 } -- ----------------------------------------------------------------- -- -- Time handling - Redundant Link operation -- ----------------------------------------------------------------- -- dts4160TimeRedundantLink OBJECT IDENTIFIER ::= { dts4160TimeHandling 20 } dts4160RedundantLinkMaxOffsetSlaveTimeSource OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) UNITS "nano seconds (ns)" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum time offset from current time to the slave time source to generate an alarm. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_RED_MAX_OFS, 4, VARTYPE_DWORD" ::= { dts4160TimeRedundantLink 3 } dts4160RedundantLinkConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Redundant operation configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_RED_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160TimeRedundantLink 100 } dts4160RedundantLinkConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_RED_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160TimeRedundantLink 101 } dts4160RedundantLinkManualMasterCmd OBJECT-TYPE SYNTAX INTEGER { auto (0), takeOverMasterRole (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Command to change the slave to master role. 0: Auto 1: Take over the master role" REFERENCE "OFS_RED_MAN_MAS, 1, VARTYPE_BYTE" ::= { dts4160TimeRedundantLink 102 } -- ----------------------------------------------------------------- -- -- Time handling - PTP configuration sets -- ----------------------------------------------------------------- -- dts4160TimePTPConfig OBJECT IDENTIFIER ::= { dts4160TimeHandling 30 } dts4160TimePTPConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4160TimePTPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with ptp configuration sets" REFERENCE "OFS_PTP1_MODE, 1, 3, 2, 22, { {88,VARTYPE_STRUCTARR}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}}" ::= { dts4160TimePTPConfig 1 } dts4160TimePTPConfigEntry OBJECT-TYPE SYNTAX Dts4160TimePTPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4160TimePTPConfigIndex } ::= { dts4160TimePTPConfigTable 1 } Dts4160TimePTPConfigEntry ::= SEQUENCE { dts4160TimePTPConfigIndex Integer32, dts4160PTPMode INTEGER, dts4160PTPProfile INTEGER, dts4160PTPDelayMechanism INTEGER, dts4160PTPTranspProto INTEGER, dts4160PTPIPv6Scope Unsigned32, dts4160PTPLeapOffset Unsigned32, dts4160PTPPriority1 Unsigned32, dts4160PTPPriority2 Unsigned32, dts4160PTPDomain Unsigned32, dts4160PTPAnnounceInterval Integer32, dts4160PTPSyncInterval Integer32, dts4160PTPAnnounceTO Integer32, dts4160PTPSyncReceiptTO Integer32, dts4160PTPDelayRequestInterval Integer32, dts4160PTPUDPTTL Integer32, dts4160PTPUnicastMasterOnly EnabledDisabled, dts4160PTPUnicastRequestDuration Integer32, dts4160PTPUnicastLocalPriority Integer32, dts4160PTPQueryInterval Integer32, dts4160PTPPowerGmID Integer32, dts4160PTPPowerAltTimeOfs Integer32 } dts4160TimePTPConfigIndex OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the PTP configuration(only virtual). Valid index = 1 .. 3" ::= { dts4160TimePTPConfigEntry 1 } dts4160PTPMode OBJECT-TYPE SYNTAX INTEGER { off (0), mastermulticastonestep(1), mastermulticasttwostep(2), masterunicastonestep(3), masterunicasttwostep(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP mode 0: Off 1: Master Multicast 1-step 2: Master Multicast 2-step 3: Master Unicast 1-step 4: Master Unicast 2-step" ::= { dts4160TimePTPConfigEntry 2 } dts4160PTPProfile OBJECT-TYPE SYNTAX INTEGER { none (0), defaultE2E (1), defaultP2P (2), utility (3), itutG82651 (4), itutG82751 (5), itutG82752 (6), ieee8021as (7) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP profile. 0: none 1: default E2E 2: default P2P 3: utility 4: ITU-T G.8265.1 5: ITU-T G.8275.1 6: ITU-T G.8275.2 7: IEEE 802.1AS" ::= { dts4160TimePTPConfigEntry 3 } dts4160PTPDelayMechanism OBJECT-TYPE SYNTAX INTEGER { e2e (0), p2p (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP delay mechanism. 0: E2E 1: P2P" ::= { dts4160TimePTPConfigEntry 4 } dts4160PTPTranspProto OBJECT-TYPE SYNTAX INTEGER { ipv4 (0), ipv6 (1), layer2 (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP transport protocol 0: IPv4 1: IPv6 2: Layer 2" ::= { dts4160TimePTPConfigEntry 5 } dts4160PTPIPv6Scope OBJECT-TYPE SYNTAX Unsigned32 (0..14) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP IPv6 mcast scope" ::= { dts4160TimePTPConfigEntry 6 } dts4160PTPLeapOffset OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "PTP leap offset (TAI-UTC)" ::= { dts4160TimePTPConfigEntry 7 } dts4160PTPPriority1 OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP priority 1" ::= { dts4160TimePTPConfigEntry 8 } dts4160PTPPriority2 OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP priority 2" ::= { dts4160TimePTPConfigEntry 9 } dts4160PTPDomain OBJECT-TYPE SYNTAX Unsigned32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP domain number" ::= { dts4160TimePTPConfigEntry 10 } dts4160PTPAnnounceInterval OBJECT-TYPE SYNTAX Integer32 (-7..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Announce interval. Interval = 2 power of value (2^value) E.g. Value = 4 --> Interval = 16 seconds Range: -7 .. 7" ::= { dts4160TimePTPConfigEntry 11 } dts4160PTPSyncInterval OBJECT-TYPE SYNTAX Integer32 (-7..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Syc interval. Interval = 2 power of value (2^value) E.g. Value = -1 --> Interval = 0.5 seconds Range: -7 .. 7" ::= { dts4160TimePTPConfigEntry 12 } dts4160PTPAnnounceTO OBJECT-TYPE SYNTAX Integer32 (2..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Announce timeout in seconds" ::= { dts4160TimePTPConfigEntry 13 } dts4160PTPSyncReceiptTO OBJECT-TYPE SYNTAX Integer32 (2..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Sync timeout in seconds. The number of sync/follow up messages that may go missing before triggering a Best Master Clock election. This option is used for running in gPTP mode according to the 802.1AS-2011 standard." ::= { dts4160TimePTPConfigEntry 14 } dts4160PTPDelayRequestInterval OBJECT-TYPE SYNTAX Integer32 (-7..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Interval between Delay Request messages. Interval = 2 power of value (2^value) E.g. Value = -1 --> Interval = 0.5 seconds Range: -7 .. 7" ::= { dts4160TimePTPConfigEntry 15 } dts4160PTPUDPTTL OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Time to live (TTL) value for IPv4 multicast messages and the hop limit for IPv6 multicast messages." ::= { dts4160TimePTPConfigEntry 16 } dts4160PTPUnicastMasterOnly OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "Prevents the port from entering the SLAVE state. Announce messages received on this port will be ignored. 0: Disable 1: Master only enabled." ::= { dts4160TimePTPConfigEntry 17 } dts4160PTPUnicastRequestDuration OBJECT-TYPE SYNTAX Integer32 (60..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "The service time in seconds to be requested during unicast discovery. Note that the remote node is free to grant a different duration." ::= { dts4160TimePTPConfigEntry 18 } dts4160PTPUnicastLocalPriority OBJECT-TYPE SYNTAX Integer32 (0..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this option is associated with Announce messages arriving on a particular port and is used as a tie breaker whenever clockClass, clockAccuracy, offsetScaledLogVariance, and priority2 are equal." ::= { dts4160TimePTPConfigEntry 19 } dts4160PTPQueryInterval OBJECT-TYPE SYNTAX Integer32 (0..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this option is associated with Announce messages arriving on a particular port and is used as a tie breaker whenever clockClass, clockAccuracy, offsetScaledLogVariance, and priority2 are equal." ::= { dts4160TimePTPConfigEntry 20 } dts4160PTPPowerGmID OBJECT-TYPE SYNTAX Integer32 (0..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "This Granmaster-ID is used in the C37.238 power profiles to identify network participants." ::= { dts4160TimePTPConfigEntry 21 } dts4160PTPPowerAltTimeOfs OBJECT-TYPE SYNTAX Integer32 (0..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this option selects the alternate Time Offset that is sent in a TLV with C37.238 power profiles" ::= { dts4160TimePTPConfigEntry 22 } dts4160PTPTAIUTCOffset OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP leap offset (TAI-UTC)" REFERENCE "OFS_PTP_TAIUTC_OFFSET, 1, VARTYPE_BYTE" ::= { dts4160TimePTPConfig 2 } dts4160PTPSlaveInterface OBJECT-TYPE SYNTAX INTEGER { none (0), lan2 (2), lan3 (3), lan4 (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP Slave ethernet interface 0 = none 2 = LAN2 3 = LAN3 4 = LAN4" REFERENCE "OFS_PTP_SLAVE_INTERFACE, 1, VARTYPE_BYTE" ::= { dts4160TimePTPConfig 10 } dts4160PTPSlaveMaxOffset OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Max offset to PTP Master to generate an alarm. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_PTP_MAX_OFFSET, 4, VARTYPE_DWORD" ::= { dts4160TimePTPConfig 11 } dts4160PTPSlaveUnicastMasterTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4160PTPSlaveUnicastMasterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with PTP slave Unicast master configuration" REFERENCE "OFS_PTP_SLAVE_MASTER_IP1, 1, 8, 2, 2, {{68,VARTYPE_STRUCTARR},{64,VARTYPE_STRING}}" ::= { dts4160TimePTPConfig 12 } dts4160PTPSlaveUnicastMasterEntry OBJECT-TYPE SYNTAX Dts4160PTPSlaveUnicastMasterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4160PTPSlaveUnicastMasterIndex } ::= { dts4160PTPSlaveUnicastMasterTable 1 } Dts4160PTPSlaveUnicastMasterEntry ::= SEQUENCE { dts4160PTPSlaveUnicastMasterIndex Integer32, dts4160PTPSlaveUnicastMasterAddr DTSNetworkName } dts4160PTPSlaveUnicastMasterIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index (only virtual). Valid index = 1 .. 8" ::= { dts4160PTPSlaveUnicastMasterEntry 1 } dts4160PTPSlaveUnicastMasterAddr OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4/IPv6 ptp unicast master address." ::= { dts4160PTPSlaveUnicastMasterEntry 2 } dts4160PTPConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP function configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_PTP_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160TimePTPConfig 100 } dts4160PTPConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_PTP_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160TimePTPConfig 101 } -- ----------------------------------------------------------------- -- -- Time handling - GNSS-DCF source -- ----------------------------------------------------------------- -- dts4160TimeDCFINConfig OBJECT IDENTIFIER ::= { dts4160TimeHandling 40 } dts4160DCFOffsetCorrection OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Offset corection for DCF as time source" REFERENCE "OFS_DCFIN_OFFSET_COR, 4, VARTYPE_DWORD" ::= { dts4160TimeDCFINConfig 10 } dts4160DCFMaxOffset OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Max DCF offset to generate an alarm. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_DCFIN_MAX_OFFSET, 4, VARTYPE_DWORD" ::= { dts4160TimeDCFINConfig 11 } dts4160DCFINConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DCF source configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_DCFIN_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160TimeDCFINConfig 100 } dts4160DCFINConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_DCFIN_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160TimeDCFINConfig 101 } -- ----------------------------------------------------------------- -- -- Time handling - Frequency-In source -- ----------------------------------------------------------------- -- dts4160TimeFINConfig OBJECT IDENTIFIER ::= { dts4160TimeHandling 60 } dts4160FINMode OBJECT-TYPE SYNTAX INTEGER { mhz10(1), mhz2dot048(2), hz1(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Signal mode for source 1: 10 MHz 2: 2.048 MHz 3: 1Hz (1PPS)" REFERENCE "OFS_F_IN_MODE, 4, VARTYPE_DWORD" ::= { dts4160TimeFINConfig 10 } dts4160FINMaxOffset OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Max F-In offset to generate an alarm. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_F_IN_MAX_OFFSET, 4, VARTYPE_DWORD" ::= { dts4160TimeFINConfig 11 } dts4160FINConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "F-In source configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_F_IN_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160TimeFINConfig 100 } dts4160FINConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_F_IN_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160TimeFINConfig 101 } -- ----------------------------------------------------------------- -- -- Time handling - NTP server -- ----------------------------------------------------------------- -- dts4160TimeNTPServer OBJECT IDENTIFIER ::= { dts4160TimeHandling 80 } -- ----------------------------------------------------------------- -- -- Time handling - NTP server - Broadcast table -- ----------------------------------------------------------------- -- dts4160NTPBroadcastTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4160NTPBroadcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with NTP broadcast configuration" REFERENCE "OFS_NTP_BCASTIP1, 1, 4, 2, 5, {{76,VARTYPE_STRUCTARR},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4160TimeNTPServer 2 } dts4160NTPBroadcastEntry OBJECT-TYPE SYNTAX Dts4160NTPBroadcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4160NTPBroadcastIndex } ::= { dts4160NTPBroadcastTable 1 } Dts4160NTPBroadcastEntry ::= SEQUENCE { dts4160NTPBroadcastIndex Integer32, dts4160NTPBroadcastAddr DTSNetworkName, dts4160NTPBrodcastInterval Unsigned32, dts4160NTPBroadcastTTL Unsigned32, dts4160NTPBroadcastKey Integer32 } dts4160NTPBroadcastIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the NTP broadcast entry (only virtual). Valid index = 1 .. 4" ::= { dts4160NTPBroadcastEntry 1 } dts4160NTPBroadcastAddr OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 broadcast or multicast address (xxx.xxx.xxx.xxx) to send out NTP time information." ::= { dts4160NTPBroadcastEntry 2 } dts4160NTPBrodcastInterval OBJECT-TYPE SYNTAX Unsigned32 (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Broadcast / multicast send interval. Interval = 2 power of value (2^value) E.g. Value = 4 --> Interval = 16 seconds" ::= { dts4160NTPBroadcastEntry 3 } dts4160NTPBroadcastTTL OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast time to live value. Range: 1..255" ::= { dts4160NTPBroadcastEntry 4 } dts4160NTPBroadcastKey OBJECT-TYPE SYNTAX Integer32 (-1 | 0 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "NTP broadcast key 0=off, 1..65534=key, -1=autokey" ::= { dts4160NTPBroadcastEntry 5 } dts4160NTPKeyFileCmd OBJECT-TYPE SYNTAX INTEGER { notDefined (0), importKeysFromFile (1), exportKeysToFile (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Import/export NTP keys. 0: Not defined 1: Import keys from file (/ram directory) 2: Export keys to file (/ram directory)" REFERENCE "OFS_NTP_KEY_FILE_CMD, 1, VARTYPE_BYTE" ::= { dts4160TimeNTPServer 20 } dts4160NTPKeyTrusted OBJECT-TYPE SYNTAX DisplayString (SIZE(0..47)) MAX-ACCESS read-write STATUS current DESCRIPTION "List of NTP trusted keys separated by spaces" REFERENCE "OFS_NTP_KEY_TRUSTED, 48, VARTYPE_STRING" ::= { dts4160TimeNTPServer 21 } dts4160NTPKeyRequest OBJECT-TYPE SYNTAX Integer32 (0 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "NTP request key 0: off 1..65534: key" REFERENCE "OFS_NTP_KEY_REQUEST, 2, VARTYPE_WORD" ::= { dts4160TimeNTPServer 22 } dts4160NTPKeyControl OBJECT-TYPE SYNTAX Integer32 (0 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "NTP control key 0: off 1..65534: key" REFERENCE "OFS_NTP_KEY_CONTROL, 2, VARTYPE_WORD" ::= { dts4160TimeNTPServer 23 } dts4160NTPKeyGeneratorCmd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..49)) MAX-ACCESS read-write STATUS current DESCRIPTION "Command according user manual" REFERENCE "OFS_NTP_KEYGEN_CMD, 50, VARTYPE_STRING" ::= { dts4160TimeNTPServer 24 } dts4160NTPAutokeyPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password for the autokey authentification" REFERENCE "OFS_NTP_AUTOKEY_PW, 15, VARTYPE_STRING" ::= { dts4160TimeNTPServer 25 } dts4160NTPAccessControl OBJECT-TYPE SYNTAX INTEGER { on (0), local (1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Access control for ntp query 0: On (all allowed) 1: Local netwotk only 2: Off (all blocked)" REFERENCE "OFS_NTP_ACCESS_CTL, 1, VARTYPE_BYTE" ::= { dts4160TimeNTPServer 26 } dts4160NTPConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "NTP server configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_NTP_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160TimeNTPServer 100 } dts4160NTPConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_NTP_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160TimeNTPServer 101 } -- ----------------------------------------------------------------- -- -- Time handling - Manual time set -- ----------------------------------------------------------------- -- dts4160TimeManualSet OBJECT IDENTIFIER ::= { dts4160TimeHandling 90 } dts4160ManualTimeSetUTC OBJECT-TYPE SYNTAX DisplayString (SIZE(17 | 19)) UNITS "Date/Time string hh:mm:ss DD.MM.YY" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the DTS system time (UTC). After set of this variable you have to set the variable dts4160ManualTimeCmd = 1 to submit the time. Format: ASCII string = hh:mm:ss DD.MM.YY" REFERENCE "OFS_MANTIME_UTC, 17, VARTYPE_STRING" ::= { dts4160TimeManualSet 1 } dts4160ManualTimeSetDiff OBJECT-TYPE SYNTAX Integer32 (-1000000000..-10|0|10..1000000000) UNITS "nano seconds (ns)" MAX-ACCESS read-write STATUS current DESCRIPTION "Correct the DTS system time by a difference value. After set of this variable you have to set the variable dts4160ManualTimeCmd = 2 to submit the time." REFERENCE "OFS_MANTIME_DIFF, 4, VARTYPE_DWORD" ::= { dts4160TimeManualSet 2 } dts4160ManualTimeCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), setTime (1), correctTime (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Change command to set the system time manual. 0: No action 1: Set the time by dts4160ManualTimeSetUTC 2: Correct the time by dts4160ManualTimeSetDiff" REFERENCE "OFS_MANTIME_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160TimeManualSet 100 } -- ----------------------------------------------------------------- -- -- Output lines -- ----------------------------------------------------------------- -- dts4160OutputLines OBJECT IDENTIFIER ::= { dts4160MIB 5 } -- ----------------------------------------------------------------- -- -- Output lines - DCF main out -- ----------------------------------------------------------------- -- dts4160OutMainDCF OBJECT IDENTIFIER ::= { dts4160OutputLines 1 } dts4160OutLineMainDCFTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4160OutLineMainDCFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with MainDCF output configuration" REFERENCE "OFS_DCF1_MODE, 1, 1, 2, 3, {{12,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4160OutMainDCF 1 } dts4160OutLineMainDCFEntry OBJECT-TYPE SYNTAX Dts4160OutLineMainDCFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4160OutLineMainDCFIndex } ::= { dts4160OutLineMainDCFTable 1 } Dts4160OutLineMainDCFEntry ::= SEQUENCE { dts4160OutLineMainDCFIndex Integer32, dts4160OutMainDCFMode INTEGER, dts4160OutMainDCFTimezone Unsigned32 } dts4160OutLineMainDCFIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the MainDCF configuration(only virtual). Valid index = 1 .. 1" ::= { dts4160OutLineMainDCFEntry 1 } dts4160OutMainDCFMode OBJECT-TYPE SYNTAX INTEGER { disable (0), dcf (1), pps (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the DCF output line. 0: disabled 1: DCF output 1: 1PPS output" ::= { dts4160OutLineMainDCFEntry 2 } dts4160OutMainDCFTimezone OBJECT-TYPE SYNTAX Unsigned32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Time zone for the generated DCF time code. 0: UTC 1-99: See user manual 800870, time zone table" ::= { dts4160OutLineMainDCFEntry 3 } dts4160OutMainDCFConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DCF output line configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_DCF_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160OutMainDCF 100 } dts4160OutMainDCFConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_DCF_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160OutMainDCF 101 } -- ----------------------------------------------------------------- -- -- Output lines - Pulse out / Frequency / DCF -- ----------------------------------------------------------------- -- dts4160OutLinePulseFREQ OBJECT IDENTIFIER ::= { dts4160OutputLines 2 } dts4160OutLinePulseFREQTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4160OutLinePulseFREQEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with PulseFREQ output configuration" REFERENCE "OFS_FREQPULS1_MODE, 1, 2, 2, 2, {{8,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER}}" ::= { dts4160OutLinePulseFREQ 1 } dts4160OutLinePulseFREQEntry OBJECT-TYPE SYNTAX Dts4160OutLinePulseFREQEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4160OutLinePulseFREQIndex } ::= { dts4160OutLinePulseFREQTable 1 } Dts4160OutLinePulseFREQEntry ::= SEQUENCE { dts4160OutLinePulseFREQIndex Integer32, dts4160OutLinePulseFREQMode INTEGER } dts4160OutLinePulseFREQIndex OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the PulseFREQ configuration(only virtual). Valid index = 1 .. 2" ::= { dts4160OutLinePulseFREQEntry 1 } dts4160OutLinePulseFREQMode OBJECT-TYPE SYNTAX INTEGER { disabled (0), mode10MHz (1), mode2048kHz (2), mode1PPS (3), mode2Hz (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the PulseFREQ output line. 0: disabled 1: Set output to 10MHz output 2: Set output to 2048kHz 3: Set output to 1PPS 4: Set outupt to 2Hz" ::= { dts4160OutLinePulseFREQEntry 2 } dts4160OutLinePulseFREQConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DCF output line configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_FREQPULS_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160OutLinePulseFREQ 100 } dts4160OutLinePulseFREQConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_FREQPULS_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160OutLinePulseFREQ 101 } -- ----------------------------------------------------------------- -- -- Output lines - Serial -- ----------------------------------------------------------------- -- dts4160OutLineSerial OBJECT IDENTIFIER ::= { dts4160OutputLines 3 } dts4160OutLineSerialTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4160OutLineSerialEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with Serial output configuration" REFERENCE "OFS_SERIAL1_MODE, 1, 2, 2, 6, {{20,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{12,VARTYPE_STRING}}" ::= { dts4160OutLineSerial 1 } dts4160OutLineSerialEntry OBJECT-TYPE SYNTAX Dts4160OutLineSerialEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4160OutLineSerialIndex } ::= { dts4160OutLineSerialTable 1 } Dts4160OutLineSerialEntry ::= SEQUENCE { dts4160OutLineSerialIndex Integer32, dts4160OutLineSerialMode EnabledDisabled, dts4160OutLineSerialTimezone Unsigned32, dts4160OutLineSerialComMode INTEGER, dts4160OutLineSerialComParam Integer32, dts4160OutLineSerialTeleFile DisplayString } dts4160OutLineSerialIndex OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the Serial configuration(only virtual). Valid index = 1 .. 2" ::= { dts4160OutLineSerialEntry 1 } dts4160OutLineSerialMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the serial output. 0: disabled 1: enabled" ::= { dts4160OutLineSerialEntry 2 } dts4160OutLineSerialTimezone OBJECT-TYPE SYNTAX Unsigned32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Time zone for the generated serial time code.. 0: UTC 1-99: See user manual 800870, time zone table" ::= { dts4160OutLineSerialEntry 3 } dts4160OutLineSerialComMode OBJECT-TYPE SYNTAX INTEGER { outRS232 (1), inOutRS232in (2), inOutRS485in (3), rs422SendOnly (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "COM mode 1: out (RS232) 2: in+out (RS232 in) 3: in+out (RS485 in) 4: RS422 send only" ::= { dts4160OutLineSerialEntry 4 } dts4160OutLineSerialComParam OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "COM parameter Bit 0-3: 0 = 300Bds 1 = 600Bds 2 = 1200Bds 3 = 2400Bds 4 = 4800Bds 5 = 9600Bds 6 = 19200Bds 7 = 38400Bds Bit 4: 0 = 7 Databits, 1 = 8 Databits Bit 5: 0 = 1 Stopbits, 1 = 2 Stopbits Bit 7-8: 0 = none parity 1 = even parity 2 = odd parity" ::= { dts4160OutLineSerialEntry 5 } dts4160OutLineSerialTeleFile OBJECT-TYPE SYNTAX DisplayString (SIZE(11)) MAX-ACCESS read-write STATUS current DESCRIPTION "Telegramm file: name.tel (name max. 11 chars)" ::= { dts4160OutLineSerialEntry 6 } dts4160OutLineSerialConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Serial output configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_SERIAL_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160OutLineSerial 100 } dts4160OutLineSerialConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_SERIAL_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160OutLineSerial 101 } -- ----------------------------------------------------------------- -- -- Output lines - IRIG / DCF-FSK -- ----------------------------------------------------------------- -- dts4160OutLineIRIG OBJECT IDENTIFIER ::= { dts4160OutputLines 4 } dts4160OutLineIRIGTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4160OutLineIRIGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with IRIG output configuration" REFERENCE "OFS_IRIG1_MODE, 1, 1, 2, 4, {{16,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4160OutLineIRIG 1 } dts4160OutLineIRIGEntry OBJECT-TYPE SYNTAX Dts4160OutLineIRIGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4160OutLineIRIGIndex } ::= { dts4160OutLineIRIGTable 1 } Dts4160OutLineIRIGEntry ::= SEQUENCE { dts4160OutLineIRIGIndex Integer32, dts4160OutLineIRIGMode INTEGER, dts4160OutLineIRIGTimezone Unsigned32, dts4160OutLineIRIGOutputLevel Integer32 } dts4160OutLineIRIGIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the IRIG configuration(only virtual). Valid index = 1 .. 1" ::= { dts4160OutLineIRIGEntry 1 } dts4160OutLineIRIGMode OBJECT-TYPE SYNTAX INTEGER { disabled (0), irigB (1), irigB12h (2), irigBDiem (3), irigB123 (4), afnorA (5), afnorC (6), dcfFSK (7), irigE122 (8), irigB126 (9) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the IRIG / AFNOR output. 0: disabled 1: IRIG-B (B122) 2: IRIG-B 12h (B122) 3: IRIG-B DIEM (B122) 4: IRIG-B123 5: AFNOR-A (NFS 87-500) 6: AFNOR-C (NFS 87-500) 7: DCF-FSK 8: IRIG-E122 DIEM 9: IRIG-B126" -- REFERENCE "OFS_IRIG1_MODE, 1, VARTYPE_BYTE" ::= { dts4160OutLineIRIGEntry 2 } dts4160OutLineIRIGTimezone OBJECT-TYPE SYNTAX Unsigned32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Time zone for the generated serial time code.. 0: UTC 1-99: See user manual 800870, time zone table" -- REFERENCE "OFS_IRIG1_TZ, 1, VARTYPE_BYTE" ::= { dts4160OutLineIRIGEntry 3 } dts4160OutLineIRIGOutputLevel OBJECT-TYPE SYNTAX Integer32 (2000..4000) MAX-ACCESS read-write STATUS current DESCRIPTION "IRIG/AFNOR output voltage (Vpp) with a 50 ohm load" -- REFERENCE "OFS_IRIG1_LEVEL, 4, VARTYPE_DWORD" ::= { dts4160OutLineIRIGEntry 4 } dts4160OutLineIRIGConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "IRIG output configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_IRIG_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160OutLineIRIG 100 } dts4160OutLineIRIGConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_IRIG_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160OutLineIRIG 101 } -- ----------------------------------------------------------------- -- -- Output lines - E1 -- ----------------------------------------------------------------- -- dts4160OutputLinesE1 OBJECT IDENTIFIER ::= { dts4160OutputLines 5 } dts4160OutLineE1Table OBJECT-TYPE SYNTAX SEQUENCE OF Dts4160OutLineE1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with E1 output configuration" REFERENCE "OFS_E1_1_MODE, 1, 1, 2, 5, {{20,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4160OutputLinesE1 1 } dts4160OutLineE1Entry OBJECT-TYPE SYNTAX Dts4160OutLineE1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4160OutLineE1Index } ::= { dts4160OutLineE1Table 1 } Dts4160OutLineE1Entry ::= SEQUENCE { dts4160OutLineE1Index Integer32, dts4160OutLineE1Mode INTEGER, dts4160OutLineE1Port INTEGER, dts4160OutLineE1Framing INTEGER, dts4160OutLineE1CRC INTEGER } dts4160OutLineE1Index OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the E1 operation mode (only virtual). Valid index = 1 .. 1" ::= { dts4160OutLineE1Entry 1 } dts4160OutLineE1Mode OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the E1 output. 0: disabled 1: enabled" ::= { dts4160OutLineE1Entry 2 } dts4160OutLineE1Port OBJECT-TYPE SYNTAX INTEGER { unbalanced (0), balanced (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Output port selection. 0: unbalanced port (BNC) 1: balanced port (RJ48)" ::= { dts4160OutLineE1Entry 3 } dts4160OutLineE1Framing OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "E1 Framing mode. 0: disabled 1: enabled" ::= { dts4160OutLineE1Entry 4 } dts4160OutLineE1CRC OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "CRC mode for E1 Framing. 0: disabled 1: enabled" ::= { dts4160OutLineE1Entry 5 } dts4160OutLineE1MaxOffset OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Max E1 offset to generate an alarm. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_E1_MAX_OFFSET, 4, VARTYPE_DWORD" ::= { dts4160OutputLinesE1 10 } dts4160OutLineE1QLOption OBJECT-TYPE SYNTAX INTEGER { qloptionone (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "E1 quality option (only Option I supported)" REFERENCE "OFS_E1_OPTION, 1, VARTYPE_BYTE" ::= { dts4160OutputLinesE1 11 } dts4160OutLineE1ConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "E1 output configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_E1_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160OutputLinesE1 100 } dts4160OutLineE1ConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_E1_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160OutputLinesE1 101 } -- ----------------------------------------------------------------- -- -- Output lines - Timezone server -- ----------------------------------------------------------------- -- dts4160OutLineTZServer OBJECT IDENTIFIER ::= { dts4160OutputLines 6 } dts4160OutLineTZServerMode OBJECT-TYPE SYNTAX INTEGER { disabled (0), sendNTPMulticast (1), sendNTPAndTimeZoneMulticast (2), sentTimeZoneMulticast (3), answerTimeZoneOnRequest (4), sendEmptyTimeZoneOnce (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the timezone server output. 0: disabled 1: send NTP multicast 2: send NTP and time zone table multicast 3: send time zone table multicast 4: answer timezone on request 5: send empty time zone table once" REFERENCE "OFS_TZSERVER_MODE, 1, VARTYPE_BYTE" ::= { dts4160OutLineTZServer 1 } dts4160OutLineTZServerMCastAddr OBJECT-TYPE SYNTAX DTSNetworkName MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 multicast address (xxx.xxx.xxx.xxx) to send out timezone information." REFERENCE "OFS_TZSERVER_MCAST_IP, 63, VARTYPE_STRING" ::= { dts4160OutLineTZServer 2 } dts4160OutLineTZServerMCastPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 multicast port (1..65535) to send out timezone information." REFERENCE "OFS_TZSERVER_MCAST_PORT, 4, VARTYPE_DWORD" ::= { dts4160OutLineTZServer 3 } dts4160OutLineTZServerNTPInterval OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Send interval of the NTP time information for the timezone server. Interval = 2 power of value (2^value) E.g. Value = 4 --> Interval = 16 seconds" REFERENCE "OFS_TZSERVER_POLL, 1, VARTYPE_BYTE" ::= { dts4160OutLineTZServer 4 } dts4160OutLineTZServerTTL OBJECT-TYPE SYNTAX Unsigned32 (1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast time to live value. Range: 1..64" REFERENCE "OFS_TZSERVER_TTL, 1, VARTYPE_BYTE" ::= { dts4160OutLineTZServer 5 } dts4160OutLineTZServerTableInterval OBJECT-TYPE SYNTAX Unsigned32 (10..86400) UNITS "seconds [s]" MAX-ACCESS read-write STATUS current DESCRIPTION "Send interval (repetition time) of the timezone table. Interval in seconds" REFERENCE "OFS_TZSERVER_TOTABLE, 4, VARTYPE_DWORD" ::= { dts4160OutLineTZServer 6 } dts4160OutLineTZServerEntryInterval OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds [s]" MAX-ACCESS read-write STATUS current DESCRIPTION "Send interval (iteration time) of the timezone entries of the timezone table. Interval in seconds" REFERENCE "OFS_TZSERVER_TOENTRY, 1, VARTYPE_BYTE" ::= { dts4160OutLineTZServer 7 } dts4160OutLineTZServerTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4160OutLineTZServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Timezone server table. 15 entries with the index of the timezone master table or user table." REFERENCE "OFS_TZSERVER_TZTABLE, 1, 15, 2, 2, {{1,VARTYPE_BYTEARR}, {1, VARTYPE_BYTE}}" ::= { dts4160OutLineTZServer 8 } dts4160OutLineTZServerEntry OBJECT-TYPE SYNTAX Dts4160OutLineTZServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the timezone table. The index number is only virtual and not accessible." INDEX { dts4160OutLineTZTableIndex } ::= { dts4160OutLineTZServerTable 1 } Dts4160OutLineTZServerEntry ::= SEQUENCE { dts4160OutLineTZTableIndex Integer32, dts4160OutLineTZTableEntryNumber Integer32 } dts4160OutLineTZTableIndex OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the timezone server table (only virtual). Valid index = 1 .. 15" ::= { dts4160OutLineTZServerEntry 1 } dts4160OutLineTZTableEntryNumber OBJECT-TYPE SYNTAX Integer32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Time zone for user timezone table entry 0: UTC 1-99: See user manual 800870, time zone table" ::= { dts4160OutLineTZServerEntry 2 } dts4160OutLineTZServerConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Timezone table server output configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_TZSERVER_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160OutLineTZServer 100 } dts4160OutLineTZServerConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_TZSERVER_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160OutLineTZServer 101 } -- ----------------------------------------------------------------- -- -- Alarm relay -- ----------------------------------------------------------------- -- dts4160AlarmRelayConfig OBJECT IDENTIFIER ::= { dts4160MIB 6 } dts4160RelayAlarmMask OBJECT-TYPE SYNTAX DTSAlarm64 (SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm bit mask for the relay output. Relay output = (Alarms & Alarmmask) > 0" REFERENCE "OFS_AL_RELAY_MASK, 8, VARTYPE_BYTEARR" ::= { dts4160AlarmRelayConfig 1 } dts4160RelayConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm relay configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_AL_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160AlarmRelayConfig 100 } dts4160RelayConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_AL_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160AlarmRelayConfig 101 } -- ----------------------------------------------------------------- -- -- Alarm mail configuration -- ----------------------------------------------------------------- -- dts4160AlarmMailConfig OBJECT IDENTIFIER ::= { dts4160MIB 7 } dts4160MailMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "Mode of the mail operation. 0: disabled 1: enabled" REFERENCE "OFS_MAIL_MODE, 1, VARTYPE_BYTE" ::= { dts4160AlarmMailConfig 1 } dts4160MailAlarmMask OBJECT-TYPE SYNTAX DTSAlarm64 (SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm bit mask to send mail alarm messages. Alarm mail = (Alarms & Alarmmask) > 0" REFERENCE "OFS_MAIL_MASK, 8, VARTYPE_BYTEARR" ::= { dts4160AlarmMailConfig 2 } dts4160MailServerAddress OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) or fully qualified domain name of the mail server." REFERENCE "OFS_MAIL_SERVER, 64, VARTYPE_STRING" ::= { dts4160AlarmMailConfig 3 } dts4160MailServerPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network port of the mail server." REFERENCE "OFS_MAIL_PORT, 4, VARTYPE_DWORD" ::= { dts4160AlarmMailConfig 4 } dts4160MailAddrDestination1 OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Mail destination address 1. Format: sample@test.com" REFERENCE "OFS_MAIL_DEST1, 64, VARTYPE_STRING" ::= { dts4160AlarmMailConfig 5 } dts4160MailAddrDestination2 OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Mail destination address 2. Format: sample@test.com" REFERENCE "OFS_MAIL_DEST2, 64, VARTYPE_STRING" ::= { dts4160AlarmMailConfig 6 } dts4160MailAddrReply OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Mail reply address. Is used to define the reply address for the recipient. Format: sample@test.com" REFERENCE "OFS_MAIL_REPLY, 64, VARTYPE_STRING" ::= { dts4160AlarmMailConfig 7 } dts4160MailAddrFrom OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Mail sender (from) address. Is normally used to authenticate the sender on the mail server. Format: sample@test.com" REFERENCE "OFS_MAIL_FROM, 64, VARTYPE_STRING" ::= { dts4160AlarmMailConfig 8 } dts4160MailUser OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "User name mail account. Is used to authenticate the sender on the mail server." REFERENCE "OFS_MAIL_USER, 64, VARTYPE_STRING" ::= { dts4160AlarmMailConfig 9 } dts4160MailPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password mail account. Is used to authenticate the sender on the mail server." REFERENCE "OFS_MAIL_PASSWORD, 64, VARTYPE_STRING" ::= { dts4160AlarmMailConfig 10 } dts4160MailAuthMode OBJECT-TYPE SYNTAX INTEGER { off (0), auto (1), plain (2), login (3), cramMD5 (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mode of the mail authentication. 0: Off (mail sender address used) 1: Auto (CRAM-MD5,LOGIN,PLAIN) 2: Plain 3: Login 4: CRAM-MD5" REFERENCE "OFS_MAIL_AUTHMODE, 1, VARTYPE_BYTE" ::= { dts4160AlarmMailConfig 11 } dts4160MailConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm mail configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_MAIL_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160AlarmMailConfig 100 } dts4160MailConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_MAIL_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160AlarmMailConfig 101 } -- ----------------------------------------------------------------- -- -- SNMP configuration -- ----------------------------------------------------------------- -- dts4160SnmpConfig OBJECT IDENTIFIER ::= { dts4160MIB 8 } dts4160SnmpMode OBJECT-TYPE SYNTAX INTEGER { snmpDisabled (0), snmpV1V2cV3 (1), snmpV2cV3 (2), snmpV3 (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mode of the SNMP operation. 0: disabled 1: SNMP version V1, V2c and V3 2: SNMP version V2c and V3 3: SNMP version V3 only" REFERENCE "OFS_SNMP_MODE, 1, VARTYPE_BYTE" ::= { dts4160SnmpConfig 1 } dts4160SnmpAlarmMask OBJECT-TYPE SYNTAX DTSAlarm64 (SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm bit mask to define the visible alarms by SNMP management system. Alarm status = (Alarms & Alarmmask) > 0" REFERENCE "OFS_SNMP_MASK, 8, VARTYPE_BYTEARR" ::= { dts4160SnmpConfig 2 } dts4160SnmpROCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Read only community string." REFERENCE "OFS_SNMPV12C_ROCOMM, 40, VARTYPE_STRING" ::= { dts4160SnmpConfig 3 } dts4160SnmpRWCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Read / write community string." REFERENCE "OFS_SNMPV12C_RWCOMM, 40, VARTYPE_STRING" ::= { dts4160SnmpConfig 4 } dts4160SnmpTrapMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "Mode of the SNMP notification operation. 0: disabled 1: enabled" REFERENCE "OFS_TRAP_MODE, 1, VARTYPE_BYTE" ::= { dts4160SnmpConfig 5 } dts4160SnmpTrapAlarmMask OBJECT-TYPE SYNTAX DTSAlarm64 (SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm bit mask to send snmp alarm messages. Alarm notification = (Alarms & Alarmmask) > 0" REFERENCE "OFS_TRAP_MASK, 8, VARTYPE_BYTEARR" ::= { dts4160SnmpConfig 6 } dts4160SnmpTrapCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Trap community string." REFERENCE "OFS_TRAP_COMM, 40, VARTYPE_STRING" ::= { dts4160SnmpConfig 7 } dts4160SnmpTrapListenerIPAddress1 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) or fully qualified domain name of the notification listener station." REFERENCE "OFS_TRAP_SERVER1, 64, VARTYPE_STRING" ::= { dts4160SnmpConfig 8 } dts4160SnmpTrapListenerPort1 OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network port of the notification listener station." REFERENCE "OFS_TRAP_PORT1, 2, VARTYPE_WORD" ::= { dts4160SnmpConfig 9 } dts4160SnmpTrapVersion1 OBJECT-TYPE SYNTAX INTEGER { version1 (1), version2c (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Version of the snmp trap/notification for trap destination 1. 1: SNMP Version 1 2: SNMP Version 2c" REFERENCE "OFS_TRAP_VERSION1, 1, VARTYPE_BYTE" ::= { dts4160SnmpConfig 10 } dts4160SnmpTrapListenerIPAddress2 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) or fully qualified domain name of the trap listener station." REFERENCE "OFS_TRAP_SERVER2, 64, VARTYPE_STRING" ::= { dts4160SnmpConfig 11 } dts4160SnmpTrapListenerPort2 OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network port of the trap listener station." REFERENCE "OFS_TRAP_PORT2, 2, VARTYPE_WORD" ::= { dts4160SnmpConfig 12 } dts4160SnmpTrapVersion2 OBJECT-TYPE SYNTAX INTEGER { version1 (1), version2c (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Version of the snmp trap/notification for trap destination 2. 1: SNMP Version 1 2: SNMP Version 2c" REFERENCE "OFS_TRAP_VERSION2, 1, VARTYPE_BYTE" ::= { dts4160SnmpConfig 13 } dts4160SnmpTrapAliveMsgInterval OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..7200) UNITS "seconds (s)" MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval to send the alive message to the trap listener stations. 0: Alive message disabled >0: Alive message enabled, Range: 1 ... 7200 seconds" REFERENCE "OFS_TRAP_ALIVE_TO, 4, VARTYPE_DWORD" ::= { dts4160SnmpConfig 14 } dts4160SnmpLocation OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Location string" REFERENCE "OFS_SNMP_LOCATION, 40, VARTYPE_STRING" ::= { dts4160SnmpConfig 15 } dts4160SnmpContact OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Contact string" REFERENCE "OFS_SNMP_CONTACT, 40, VARTYPE_STRING" ::= { dts4160SnmpConfig 16 } -- ----------------------------------------------------------------- -- -- SNMP configuration - SNMPv3 -- ----------------------------------------------------------------- -- dts4160SnmpV3 OBJECT IDENTIFIER ::= { dts4160SnmpConfig 30 } dts4160SnmpV3UserPassword1 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User password string." REFERENCE "OFS_SNMPV3_USERPW1, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 1 } dts4160SnmpV3UserLevel1 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User access level" REFERENCE "OFS_SNMPV3_USERLEVEL1, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 2 } dts4160SnmpV3UserRead1 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User access level" REFERENCE "OFS_SNMPV3_USERREAD1, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 3 } dts4160SnmpV3UserWrite1 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User access level" REFERENCE "OFS_SNMPV3_USERWRITE1, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 4 } dts4160SnmpV3UserPassword2 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User password string." REFERENCE "OFS_SNMPV3_USERPW2, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 5 } dts4160SnmpV3UserLevel2 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User access level" REFERENCE "OFS_SNMPV3_USERLEVEL2, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 6 } dts4160SnmpV3UserRead2 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User access level" REFERENCE "OFS_SNMPV3_USERREAD2, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 7 } dts4160SnmpV3UserWrite2 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User access level" REFERENCE "OFS_SNMPV3_USERWRITE2, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 8 } dts4160SnmpV3View11 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 1" REFERENCE "OFS_SNMPV3_VIEW1_1, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 11 } dts4160SnmpV3View12 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 1" REFERENCE "OFS_SNMPV3_VIEW1_2, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 12 } dts4160SnmpV3View13 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 1" REFERENCE "OFS_SNMPV3_VIEW1_3, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 13 } dts4160SnmpV3View14 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 1" REFERENCE "OFS_SNMPV3_VIEW1_4, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 14 } dts4160SnmpV3View15 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 1" REFERENCE "OFS_SNMPV3_VIEW1_5, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 15 } dts4160SnmpV3View16 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 1" REFERENCE "OFS_SNMPV3_VIEW1_6, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 16 } dts4160SnmpV3View21 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 2" REFERENCE "OFS_SNMPV3_VIEW2_1, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 21 } dts4160SnmpV3View22 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 2" REFERENCE "OFS_SNMPV3_VIEW2_2, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 22 } dts4160SnmpV3View23 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 2" REFERENCE "OFS_SNMPV3_VIEW2_3, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 23 } dts4160SnmpV3View24 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 2" REFERENCE "OFS_SNMPV3_VIEW2_4, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 24 } dts4160SnmpV3View25 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 2" REFERENCE "OFS_SNMPV3_VIEW2_5, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 25 } dts4160SnmpV3View26 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 2" REFERENCE "OFS_SNMPV3_VIEW2_6, 40, VARTYPE_STRING" ::= { dts4160SnmpV3 26 } dts4160SnmpV3ConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP v3 configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_SNMPV3_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160SnmpV3 100 } dts4160SnmpV3ConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_SNMPV3_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160SnmpV3 101 } dts4160SnmpConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_SNMP_CHANGED, 1, VARTYPE_BYTE" ::= { dts4160SnmpConfig 100 } dts4160SnmpConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_SNMP_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4160SnmpConfig 101 } -- ----------------------------------------------------------------- -- -- SNMP configuration - Current alarm information -- ----------------------------------------------------------------- -- dts4160SnmpCurrentAlarmInfo OBJECT IDENTIFIER ::= { dts4160SnmpConfig 1000 } dts4160TrapAlMsgErrorNr OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "Error number of the trap message." REFERENCE "OFS_TRAP_ERRORNBR, 1, VARTYPE_BYTE" ::= { dts4160SnmpCurrentAlarmInfo 1 } dts4160TrapAlMsgErrorState OBJECT-TYPE SYNTAX INTEGER { off (0), on (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Error state of the trap message." REFERENCE "OFS_TRAP_ERRORSTATE, 1, VARTYPE_BYTE" ::= { dts4160SnmpCurrentAlarmInfo 2 } dts4160TrapAlMsgErrorTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "Seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Error time of the trap message. Seconds since 1.1.1970 00:00:00" REFERENCE "OFS_TRAP_ERRORTIME, 4, VARTYPE_DWORD" ::= { dts4160SnmpCurrentAlarmInfo 3 } dts4160TrapAlMsgErrorText OBJECT-TYPE SYNTAX DisplayString (SIZE(1..59)) MAX-ACCESS read-only STATUS current DESCRIPTION "Error text of the trap message." REFERENCE "OFS_TRAP_MESSAGE, 60, VARTYPE_STRING" ::= { dts4160SnmpCurrentAlarmInfo 4 } -- ----------------------------------------------------------------- -- -- MIBv3 conformance -- ----------------------------------------------------------------- -- dts4160MIBConformance OBJECT IDENTIFIER ::= { dts4160MIB 14160 } dts4160MIBMIBCompliances OBJECT IDENTIFIER ::= { dts4160MIBConformance 1 } dts4160MIBGroups OBJECT IDENTIFIER ::= { dts4160MIBConformance 2 } -- compliance statements dts4160MIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for DTS 4160." MODULE -- this module MANDATORY-GROUPS { dts4160AllNotifications, dts4160AllObjects } ::= { dts4160MIBMIBCompliances 1 } dts4160AllNotifications NOTIFICATION-GROUP NOTIFICATIONS { dts4160StartUp, dts4160Shutdown, dts4160Alarm, dts4160StatusChanged, dts4160ConfigChanged, dts4160Alive } STATUS current DESCRIPTION "This automatically created notification group contains all notifications that do not belong to any other NOTIFICATION-GROUP" ::= { dts4160MIBGroups 1 } dts4160AllObjects OBJECT-GROUP OBJECTS { dts4160SysStatus, dts4160SysAlarms, dts4160Language, dts4160Timezone, dts4160Password, dts4160PowerSupply, dts4160USBPort, dts4160NetInfoPortStatus, dts4160NetInfoPortLink, dts4160NetInfoPortMAC, dts4160NetInfoPortIP1v4, dts4160NetInfoPortSubnet1v4, dts4160NetInfoPortGW1v4, dts4160NetInfoPortIP2v4, dts4160NetInfoPortSubnet2v4, dts4160NetInfoPortGW2v4, dts4160NetInfoPortDNSv4, dts4160NetInfoPortHostname, dts4160NetInfoPortDomain, dts4160NetInfoPortDHCPMode, dts4160NetInfoPortIPv6linklocal, dts4160NetInfoPortIP1v6, dts4160NetInfoPortIP2v6, dts4160NetInfoPortIPGWv6, dts4160NetInfoPortVLANid1, dts4160NetInfoPortVLANid2, dts4160NetInfoPortVLANPCP1, dts4160NetInfoPortVLANPCP2, dts4160NetInfoPortLAGStatus, dts4160NetInfoPortPTPConfig, dts4160NetInfoPortSyncE, dts4160NetInfoLAGIfStatus, dts4160NetInfoLAGIfPollIntervall, dts4160NetInfoLAGIfLACPRate, dts4160NetInfoLAGIfMinLinks, dts4160NetInfoLAGIfAggregatorID, dts4160NetInfoLAGIfAggregatorNrActivePorts, dts4160NetInfoLAGIfAggregatorActorKey, dts4160NetInfoLAGIfPartnerMACAddress, dts4160NetInfoLAGIfSlave1Status, dts4160NetInfoLAGIfSlave1LinkSpeed, dts4160NetInfoLAGIfSlave1LinkDuplex, dts4160NetInfoLAGIfSlave1LinkFailureCount, dts4160NetInfoLAGIfSlave2Status, dts4160NetInfoLAGIfSlave2LinkSpeed, dts4160NetInfoLAGIfSlave2LinkDuplex, dts4160NetInfoLAGIfSlave2LinkFailureCount, dts4160TimeInfoStratum, dts4160TimeInfoLastDrift, dts4160TimeInfoLastQCorr, dts4160TimeInfoTimeSource, dts4160TimeInfoSourceQuality, dts4160TimeInfoSourceOffsetNSec, dts4160TimeInfoLastTime, dts4160TimeInfoSourceJitter, dts4160TimeInfoLeapSecStatus, dts4160TimeInfoLeapSecDate, dts4160TimeInfoLeapSecDir, dts4160TimeInfoLeapSecSource, dts4160TimeInfoLeapSecLastDate, dts4160TimeInfoLeapSecLastDir, dts4160GNSSTimeInfoGNSSState, dts4160GNSSTimeInfoLastTime, dts4160GNSSTimeInfoOffsetSec, dts4160GNSSTimeInfoOffsetNSec, dts4160GNSSTimeInfoValidity, dts4160GNSSTimeInfoSVCount, dts4160GNSSTimeInfoTDOP, dts4160GNSSTimeInfoInternalAccuracy, dts4160GNSSTimeInfoSurveyInMode, dts4160GNSSTimeInfoSurveyInStatus, dts4160GNSSTimeInfoPositionLatitude, dts4160GNSSTimeInfoPositionLongitude, dts4160GNSSTimeInfoPositionHeightAboveSea, dts4160GNSSTimeInfoAntennaDelay, dts4160GNSSTimeInfoFixType, dts4160GNSSTimeInfoLeapSecStatus, dts4160GNSSTimeInfoLeapSecDate, dts4160GNSSTimeInfoLeapSecDir, dts4160GNSSTimeInfoJammingState, dts4160GNSSTimeInfoJammingIndicator, dts4160GNSSTimeInfoAGCMonitor, dts4160GNSSTimeInfoNoisePerMS, dts4160GNSSTimeInfoConfigured, dts4160GNSSTimeInfoPriority, dts4160GNSSTimeInfoState, dts4160GNSSTimeInfoDeviation, dts4160GNSSTimeInfoRating, dts4160RedLinkTimeInfoLinkState, dts4160RedLinkTimeInfoLeapSecStatus, dts4160RedLinkTimeInfoLeapSecDate, dts4160RedLinkTimeInfoLeapSecDir, dts4160RedLinkTimeInfoConfigured, dts4160RedLinkTimeInfoPriority, dts4160RedLinkTimeInfoState, dts4160RedLinkTimeInfoLastTime, dts4160RedLinkTimeInfoOffsetSec, dts4160RedLinkTimeInfoOffsetNSec, dts4160RedLinkTimeInfoDeviation, dts4160RedLinkTimeInfoRating, dts4160PTPTimeInfoLeapSecStatus, dts4160PTPTimeInfoLeapSecDate, dts4160PTPTimeInfoLeapSecDir, dts4160PTPTimeInfoConfigured, dts4160PTPTimeInfoPriority, dts4160PTPTimeInfoState, dts4160PTPTimeInfoLastTime, dts4160PTPTimeInfoOffsetSec, dts4160PTPTimeInfoOffsetNSec, dts4160PTPTimeInfoDeviation, dts4160PTPTimeInfoRating, dts4160DCFTimeInfoSatNbr, dts4160DCFTimeInfoSecCount, dts4160DCFTimeInfoConfigured, dts4160DCFTimeInfoPriority, dts4160DCFTimeInfoState, dts4160DCFTimeInfoLeapSecStatus, dts4160DCFTimeInfoLeapSecDate, dts4160DCFTimeInfoLeapSecDir, dts4160DCFTimeInfoLastTime, dts4160DCFTimeInfoOffsetSec, dts4160DCFTimeInfoOffsetNSec, dts4160DCFTimeInfoDeviation, dts4160DCFTimeInfoRating, dts4160E1TimeInfoQualityLevel, dts4160E1TimeInfoLastTime, dts4160E1TimeInfoConfigured, dts4160E1TimeInfoPriority, dts4160E1TimeInfoState, dts4160E1TimeInfoLastTime, dts4160E1TimeInfoOffsetSec, dts4160E1TimeInfoOffsetNSec, dts4160E1TimeInfoDeviation, dts4160E1TimeInfoRating, dts4160FINTimeInfoLastTime, dts4160FINTimeInfoConfigured, dts4160FINTimeInfoPriority, dts4160FINTimeInfoState, dts4160FINTimeInfoLastTime, dts4160FINTimeInfoOffsetSec, dts4160FINTimeInfoOffsetNSec, dts4160FINTimeInfoDeviation, dts4160FINTimeInfoRating, dts4160NTPTimeInfoCurrentSource, dts4160NTPTimeInfoSystemOffset, dts4160NTPTimeInfoSourceJitter, dts4160NTPTimeInfoStratum, dts4160NTPTimeInfoFrequency, dts4160NTPTInfoReachable, dts4160OscTimeInfoLockedState, dts4160OscTimeInfoPLLState, dts4160OscTimeInfoPPSTrackingState, dts4160SupplyVoltage1, dts4160SupplyVoltage2, dts4160SysUpdateCmd, dts4160SysBackupCmd, dts4160SysRestoreCmd, dts4160SysRestartCmd, dts4160SysDefaultCmd, dts4160SysAllChanged, dts4160SysCopyFiles, dts4160verFPGA, dts4160verFPGADriver, dts4160verModule, dts4160verLangResource, dts4160verTimezoneTable, dts4160verNTP, dts4160verLinux, dts4160verCLIShell, dts4160verRootFS, dts4160verSNMPMasterAgent, dts4160verSNMPSubAgent, dts4160verApplication, dts4160verPTP4L, dts4160ProdInfoHWCode, dts4160ProdInfoHWName, dts4160ProdInfoHWRevision, dts4160ProdInfoProdNo, dts4160ProdInfoArticleNo, dts4160ProdInfoFirmwareVer, dts4160SysConfigCmd, dts4160SysConfigChangedTime, dts4160NetworkPortLinkMode, dts4160NetworkPortPTPSupport, dts4160NetworkPortPTPConfig, dts4160NetworkPortLAGSupport, dts4160NetworkPortLAGConfig, dts4160NetworkPortSyncESupport, dts4160NetworkPortSyncEConfig, dts4160NetworkPortCfgChanged, dts4160NetworkPortConfigCmd, dts4160NetworkPortConfigChangedTime, dts4160NetworkLAGIFMode, dts4160NetworkLAGIFLACPRate, dts4160NetworkLAGIFMiiMon, dts4160NetworkLAGIFCfgChanged, dts4160NetworkLAGIFConfigCmd, dts4160NetworkLAGIFConfigChangedTime, dts4160NetworkIPCfgMode, dts4160NetworkIPCfgIP1v4, dts4160NetworkIPCfgIPMask1v4, dts4160NetworkIPCfgIPGateway1v4, dts4160NetworkIPCfgIP2v4, dts4160NetworkIPCfgIPMask2v4, dts4160NetworkIPCfgIPGateway2v4, dts4160NetworkIPCfgDHCPMode, dts4160NetworkIPCfgHostname, dts4160NetworkIPCfgDomain, dts4160NetworkIPCfgIPNameserver, dts4160NetworkIPCfgIPv6AutoConf, dts4160NetworkIPCfgIPv6DHCPMode, dts4160NetworkIPCfgIPv6Addr1, dts4160NetworkIPCfgIPv6Prefix1, dts4160NetworkIPCfgIPv6Addr2, dts4160NetworkIPCfgIPv6Prefix2, dts4160NetworkIPCfgIPv6Gateway1, dts4160NetworkIPCfgIPv6Gateway2, dts4160NetworkIPCfgIPv6Nameserver, dts4160NetworkIPCfgVLANMember1, dts4160NetworkIPCfgVLANMember2, dts4160NetworkIPCfgIP1v4RouteDest1, dts4160NetworkIPCfgIP1v4RoutePrefix1, dts4160NetworkIPCfgIP1v4RouteDest2, dts4160NetworkIPCfgIP1v4RoutePrefix2, dts4160NetworkIPCfgIP2v4RouteDest1, dts4160NetworkIPCfgIP2v4RoutePrefix1, dts4160NetworkIPCfgIP2v4RouteDest2, dts4160NetworkIPCfgIP2v4RoutePrefix2, dts4160NetworkIPCfgChanged, dts4160NetworkIPCfgConfigCmd, dts4160NetworkIPCfgConfigChangedTime, dts4160NetworkVLANCfgName, dts4160NetworkVLANCfgID, dts4160NetworkVLANQosBK, dts4160NetworkVLANQosBE, dts4160NetworkVLANQosEE, dts4160NetworkVLANQosCA, dts4160NetworkVLANQosVI, dts4160NetworkVLANQosVO, dts4160NetworkVLANQosIC, dts4160NetworkVLANQosNC, dts4160NetworkVLANQosPCP, dts4160NetworkVLANCfgChanged, dts4160NetworkVLANConfigCmd, dts4160NetworkVLANConfigChangedTime, dts4160TelnetMode, dts4160FTPMode, dts4160SSHMode, dts4160NetServicesConfigCmd, dts4160NetServicesConfigChangedTime, dts4160TSConfigChangedTime, dts4160TimeSourcePriorityType, dts4160TimeSourcePriorityAcc, dts4160TimeSourcePriorityMode, dts4160TSTimezone, dts4160TSStratumMode, dts4160TSStratumErrorLimit, dts4160TSTimeout, dts4160TSStratumTimeout1, dts4160TSOffsetPerStratum, dts4160TSStratumChangeSourceFail, dts4160TSMaxOffsetForTimeValid, dts4160TSAdjustmentMode, dts4160TSMaxAdjustmentSpeed, dts4160TSOffsetSynchOnly, dts4160TSLeapSecMode, dts4160TSLeapSecDate, dts4160TSRTCMode, dts4160TSAlarmBigOffset, dts4160TSConfigCmd, dts4160RedundantLinkMaxOffsetSlaveTimeSource, dts4160RedundantLinkConfigCmd, dts4160RedundantLinkConfigChangedTime, dts4160RedundantLinkManualMasterCmd, dts4160NTPKeyFileCmd, dts4160NTPKeyTrusted, dts4160NTPKeyRequest, dts4160NTPKeyControl, dts4160NTPKeyGeneratorCmd, dts4160NTPAutokeyPassword, dts4160NTPAccessControl, dts4160NTPConfigCmd, dts4160NTPConfigChangedTime, dts4160ManualTimeSetUTC, dts4160ManualTimeSetDiff, dts4160ManualTimeCmd, dts4160PTPMode, dts4160PTPProfile, dts4160PTPDelayMechanism, dts4160PTPTranspProto, dts4160PTPIPv6Scope, dts4160PTPPriority1, dts4160PTPPriority2, dts4160PTPDomain, dts4160PTPAnnounceInterval, dts4160PTPSyncInterval, dts4160PTPAnnounceTO, dts4160PTPSyncReceiptTO, dts4160PTPDelayRequestInterval, dts4160PTPUDPTTL, dts4160PTPUnicastMasterOnly, dts4160PTPUnicastRequestDuration, dts4160PTPUnicastLocalPriority, dts4160PTPQueryInterval, dts4160PTPPowerGmID, dts4160PTPPowerAltTimeOfs, dts4160PTPTAIUTCOffset, dts4160PTPSlaveMaxOffset, dts4160PTPSlaveInterface, dts4160PTPSlaveUnicastMasterAddr, dts4160PTPConfigCmd, dts4160PTPConfigChangedTime, dts4160GNSSConstellationMode, dts4160GNSSMaxOffset, dts4160GNSSSurveyInMode, dts4160GNSSSurveyInObservationTime, dts4160GNSSSurveyInObservationAccuracy, dts4160GNSSSurveyInCommand, dts4160GNSSAntennaSupply, dts4160GNSSAntennaDelay, dts4160GNSSSensSVCount, dts4160GNSSSensSVSigLevel, dts4160GNSSConfigCmd, dts4160GNSSConfigChangedTime, dts4160DCFOffsetCorrection, dts4160DCFMaxOffset, dts4160DCFINConfigCmd, dts4160DCFINConfigChangedTime, dts4160FINMode, dts4160FINMaxOffset, dts4160FINConfigCmd, dts4160FINConfigChangedTime, dts4160OutMainDCFConfigChangedTime, dts4160OutMainDCFMode, dts4160OutMainDCFTimezone, dts4160OutMainDCFConfigCmd, dts4160OutLinePulseFREQMode, dts4160OutLinePulseFREQConfigCmd, dts4160OutLinePulseFREQConfigChangedTime, dts4160OutLineIRIGMode, dts4160OutLineIRIGTimezone, dts4160OutLineIRIGOutputLevel, dts4160OutLineIRIGConfigCmd, dts4160OutLineIRIGConfigChangedTime, dts4160OutLineE1Mode, dts4160OutLineE1Port, dts4160OutLineE1Framing, dts4160OutLineE1CRC, dts4160OutLineE1MaxOffset, dts4160OutLineE1QLOption, dts4160OutLineE1ConfigCmd, dts4160OutLineE1ConfigChangedTime, dts4160OutLineTZServerMode, dts4160OutLineTZServerMCastAddr, dts4160OutLineTZServerMCastPort, dts4160OutLineTZServerNTPInterval, dts4160OutLineTZServerTTL, dts4160OutLineTZServerTableInterval, dts4160OutLineTZServerEntryInterval, dts4160OutLineTZServerConfigCmd, dts4160OutLineTZServerConfigChangedTime, dts4160OutLineSerialMode, dts4160OutLineSerialTimezone, dts4160OutLineSerialComMode, dts4160OutLineSerialComParam, dts4160OutLineSerialTeleFile, dts4160OutLineSerialConfigCmd, dts4160OutLineSerialConfigChangedTime, dts4160RelayAlarmMask, dts4160RelayConfigCmd, dts4160RelayConfigChangedTime, dts4160MailMode, dts4160MailAlarmMask, dts4160MailServerAddress, dts4160MailServerPort, dts4160MailAddrDestination1, dts4160MailAddrDestination2, dts4160MailAddrReply, dts4160MailAddrFrom, dts4160MailUser, dts4160MailPassword, dts4160MailAuthMode, dts4160MailConfigCmd, dts4160MailConfigChangedTime, dts4160SnmpMode, dts4160SnmpAlarmMask, dts4160SnmpROCommunity, dts4160SnmpRWCommunity, dts4160SnmpTrapMode, dts4160SnmpTrapAlarmMask, dts4160SnmpTrapCommunity, dts4160SnmpTrapListenerIPAddress1, dts4160SnmpTrapListenerPort1, dts4160SnmpTrapVersion1, dts4160SnmpTrapListenerIPAddress2, dts4160SnmpTrapListenerPort2, dts4160SnmpTrapVersion2, dts4160SnmpTrapAliveMsgInterval, dts4160SnmpLocation, dts4160SnmpContact, dts4160SnmpV3UserPassword1, dts4160SnmpV3UserLevel1, dts4160SnmpV3UserRead1, dts4160SnmpV3UserWrite1, dts4160SnmpV3UserPassword2, dts4160SnmpV3UserLevel2, dts4160SnmpV3UserRead2, dts4160SnmpV3UserWrite2, dts4160SnmpV3View11, dts4160SnmpV3View12, dts4160SnmpV3View13, dts4160SnmpV3View14, dts4160SnmpV3View15, dts4160SnmpV3View16, dts4160SnmpV3View21, dts4160SnmpV3View22, dts4160SnmpV3View23, dts4160SnmpV3View24, dts4160SnmpV3View25, dts4160SnmpV3View26, dts4160SnmpV3ConfigChangedTime, dts4160SnmpV3ConfigCmd, dts4160SnmpConfigCmd, dts4160SnmpConfigChangedTime, dts4160TrapAlMsgErrorNr, dts4160TrapAlMsgErrorState, dts4160TrapAlMsgErrorTime, dts4160TrapAlMsgErrorText, dts4160NTPBroadcastAddr, dts4160NTPBrodcastInterval, dts4160NTPBroadcastTTL, dts4160NTPBroadcastKey, dts4160OutLineTZTableEntryNumber } STATUS current DESCRIPTION "This automatically created object group contains all those objects that do not belong to any other OBJECT-GROUP" ::= { dts4160MIBGroups 2 } dts4160AllObsoleteObjects OBJECT-GROUP OBJECTS { dts4160PTPLeapOffset } STATUS obsolete DESCRIPTION "This automatically created object group contains all those objects that have status obsolete" ::= { dts4160MIBGroups 3 } END