DTS4150 DEFINITIONS ::= BEGIN -- ----------------------------------------------------------------- -- -- Imports -- ----------------------------------------------------------------- -- IMPORTS Integer32, OBJECT-TYPE, MODULE-IDENTITY, Unsigned32, NOTIFICATION-TYPE, TimeTicks, Gauge32 FROM SNMPv2-SMI OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF DisplayString FROM SNMPv2-TC DTSNetworkName, DTSAlarm64, DTSFlags32, EnabledDisabled, dts FROM DTS-COMMON; -- ----------------------------------------------------------------- -- -- MODULE definition -- ----------------------------------------------------------------- -- dts4150MIB MODULE-IDENTITY LAST-UPDATED "202111230741Z" ORGANIZATION "Moser-Baer AG" CONTACT-INFO "Moser-Baer AG support@mobatime.com" DESCRIPTION "This mib definition is used for DTS 4150 devices." REVISION "202111230741Z" DESCRIPTION "Add PTP unicast master table and C37.238 power profiles parameters" REVISION "202103080911Z" DESCRIPTION "Rename DCF-HQ to GNSS-DCF. NTP source info parameters" REVISION "201905070621Z" DESCRIPTION "Initial version of this module" ::= { dts 4150 } -- ----------------------------------------------------------------- -- -- Traps -- ----------------------------------------------------------------- -- dts4150Traps OBJECT IDENTIFIER ::= { dts4150MIB 0 } dts4150StartUp NOTIFICATION-TYPE STATUS current DESCRIPTION "The DTS subagent has startup." REFERENCE "NOTIFICATION_STARTUP" ::= { dts4150Traps 1 } dts4150Shutdown NOTIFICATION-TYPE STATUS current DESCRIPTION "The DTS subagent is shutdown." REFERENCE "NOTIFICATION_SHUTDOWN" ::= { dts4150Traps 2 } dts4150Alarm NOTIFICATION-TYPE OBJECTS { dts4150TrapAlMsgErrorNr, dts4150TrapAlMsgErrorState, dts4150TrapAlMsgErrorTime, dts4150TrapAlMsgErrorText } STATUS current DESCRIPTION "Alarm notification with attached (binded variables) alarm information. dts4150TrapAlMsgErrorNr, dts4150TrapAlMsgErrorState, dts4150TrapAlMsgErrorTime, dts4150TrapAlMsgErrorText" REFERENCE "NOTIFICATION_ALARM {OFS_TRAP_MODE, 4}, {OFS_TRAP_STATE, 76}" ::= { dts4150Traps 3 } dts4150StatusChanged NOTIFICATION-TYPE OBJECTS { dts4150SysStatus, dts4150TimeInfoSourceOffsetNSec, dts4150TimeInfoStratum, dts4150TimeInfoTimeSource } STATUS current DESCRIPTION "Notification for a status change. Attached are the variables dts4150SysStatus, dts4150TimeInfoSourceOffsetNSec, dts4150TimeInfoStratum, dts4150TimeInfoTimeSource" REFERENCE "NOTIFICATION_STATUS {OFS_DTS_STATE, 4}, {OFS_TINFO_SOURCETYPE, 1}, {OFS_TINFO_STRATUM, 1}" ::= { dts4150Traps 4 } dts4150ConfigChanged NOTIFICATION-TYPE OBJECTS { dts4150SysConfigChangedTime, dts4150NetworkPortConfigChangedTime, dts4150NetworkLAGIFConfigChangedTime, dts4150NetworkIPCfgConfigChangedTime, dts4150NetworkVLANConfigChangedTime, dts4150NetServicesConfigChangedTime, dts4150TSConfigChangedTime, dts4150RedundantLinkConfigChangedTime, dts4150NTPConfigChangedTime, dts4150PTPConfigChangedTime, dts4150GNSSConfigChangedTime, dts4150DCFINConfigChangedTime, dts4150OutMainDCFConfigChangedTime, dts4150OutLineTZServerConfigChangedTime, dts4150RelayConfigChangedTime, dts4150MailConfigChangedTime, dts4150SnmpConfigChangedTime, dts4150SnmpV3ConfigChangedTime } STATUS current DESCRIPTION "Notification of a configuration change. Attached are all changed times of the different configuration sections." REFERENCE "NOTIFICATION_CFGCHANGE {OFS_GEN_UPDATE, 1}, {OFS_SERVICE_UPDATE, 1}, {OFS_TIME_UPDATE, 1}, {OFS_RED_UPDATE, 1}, {OFS_NTP_UPDATE, 1}, {OFS_PTP_UPDATE, 1}, {OFS_GNSS_UPDATE, 1}, {OFS_DCFIN_UPDATE, 1}, {OFS_DCF_UPDATE, 1}, {OFS_TZSERVER_UPDATE, 1}, {OFS_AL_UPDATE, 1}, {OFS_MAIL_UPDATE, 1}, {OFS_SNMPV3_UPDATE, 1}, {OFS_SNMP_UPDATE, 1}" ::= { dts4150Traps 5 } dts4150Alive NOTIFICATION-TYPE OBJECTS { dts4150SysStatus, dts4150SysAlarms } STATUS current DESCRIPTION "Device alive notification. Will be send in the configured interval. Attached are the variables dts4150SysStatus and dts4150SysAlarms." REFERENCE "NOTIFICATION_ALIVE {OFS_TRAP_MODE, 4}, {OFS_TRAP_ALIVE_TO, 4}" ::= { dts4150Traps 6 } -- ----------------------------------------------------------------- -- -- System -- ----------------------------------------------------------------- -- dts4150System OBJECT IDENTIFIER ::= { dts4150MIB 1 } dts4150SysStatus OBJECT-TYPE SYNTAX DTSFlags32 MAX-ACCESS read-only STATUS current DESCRIPTION "DTS System status (32bit). Internal state of the DTS application software. Used for maintenance only. Bit 00: DTS configuration ready Bit 01: FPGA is ready Bit 02: FPGA running Bit 03: Reserved Bit 04: Reserved Bit 05: Reserved Bit 06: Reserved Bit 07: Reserved Bit 08: System time set Bit 09: Synchronisation is ok Bit 10: Time shifting in progress Bit 11: Running on NTP as backup Bit 12: Notification of a leap second Bit 13: Oscillator locked Bit 14: Reserved Bit 15: Reserved Bit 16: Master Bit 17: Slave Bit 18: Link ok Bit 19: Reserved Bit 20: Reserved Bit 21: Reserved Bit 22: Reserved Bit 23: Default MAC address Bit 24: Power supply is ok Bit 25: Restarting (never shown) Bit 26: High CPU usage Bit 27: High CPU temperatur Bit 28: High disk usage RamFS Bit 29: High disk usage RootFS Bit 30: High disk usage DTSCfgFS Bit 31: High disk usage DTSAppFS" REFERENCE "OFS_DTS_STATE, 4, VARTYPE_DWORD" ::= { dts4150System 1 } dts4150SysAlarms OBJECT-TYPE SYNTAX DTSAlarm64 (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Alarm state of the DTS 4150 Bit00=DTS restart Bit01=System warning Bit02=Supply voltage too low Bit03=Failure red. supply Bit04=Internal voltage to low Bit05=High offset to GNSS Bit06=High offset to PTP Bit07=High offset to GNSS-DCF Bit08=Error bit8 Bit09=Error bit9 Bit10=PTP synch lost Bit11=GNSS-DCF synch lost Bit12=Error bit12 Bit13=Error bit13 Bit14=GNSS synch lost Bit15=Time source big offset Bit16=Time source fail strat Bit17=Time source fail TO Bit18=No valid time Bit19=NTP synch lost Bit20=High offset to NTP Bit21=NTP failed Bit22=Error bit22 Bit23=No valid timesource Bit24=No mail server Bit25=SNMP not running Bit26=Error bit26 Bit27=Error bit27 Bit28=Error bit28 Bit29=NTP Key Config error Bit30=Error bit30 Bit31=No DTS link Bit32=Change over slave->master Bit33=High offset to master Bit34=Oscillator not locked Bit35=SyncE not running Bit36=PTP not running Bit37=Error bit37 Bit38=Error bit38 Bit39=Error bit39 Bit40=Error bit40 Bit41=Error bit41 Bit42=Error bit42 Bit43=Error bit43 Bit44=Error bit44 Bit45=Error bit45 Bit46=Error bit46 Bit47=Error bit47 Bit48=Error bit48 Bit49=Error bit49 Bit50=Error bit50 Bit51=Error bit51 Bit52=Error bit52 Bit53=Error bit53 Bit54=Wrong time zone DCF output 1 Bit55=Error bit55 Bit56=Error bit56 Bit57=Error bit57 Bit58=Wrong time zone DCF Bit59=Error bit59 Bit60=Error bit60 Bit61=Error bit61 Bit62=Error bit62 Bit63=Error bit63" REFERENCE "OFS_ALSTATE_ALARMS, 8, VARTYPE_BYTEARR" ::= { dts4150System 8 } dts4150Language OBJECT-TYPE SYNTAX INTEGER { english (0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Language of the menu text. 0: English" REFERENCE "OFS_GEN_LANG, 1, VARTYPE_BYTE" ::= { dts4150System 9 } dts4150Timezone OBJECT-TYPE SYNTAX Unsigned32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Time zone for the display and the alarm messages. 0: UTC 1-99: See user manual 800870, time zone table" REFERENCE "OFS_GEN_LOC_TZ, 1, VARTYPE_BYTE" ::= { dts4150System 10 } dts4150Password OBJECT-TYPE SYNTAX DisplayString (SIZE(0..14)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password for the menu and FTP." REFERENCE "OFS_GEN_PASSWORD, 15, VARTYPE_STRING" ::= { dts4150System 11 } dts4150PowerSupply OBJECT-TYPE SYNTAX INTEGER { singleMode (0), redundantMode (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the power supply. 0: single mode 1: redundant mode" REFERENCE "OFS_GEN_POWER, 1, VARTYPE_BYTE" ::= { dts4150System 12 } dts4150USBPort OBJECT-TYPE SYNTAX INTEGER { usbportOFF (0), usbportON (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the USB port. 0: USB port off 1: USB port on" REFERENCE "OFS_GEN_USBPORT, 1, VARTYPE_BYTE" ::= { dts4150System 13 } -- ----------------------------------------------------------------- -- -- System - Network information -- ----------------------------------------------------------------- -- dts4150NetworkInfo OBJECT IDENTIFIER ::= { dts4150System 20 } -- ----------------------------------------------------------------- -- -- System - Network information - Ports -- ----------------------------------------------------------------- -- dts4150NetInfoPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4150NetInfoPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with network interface info" REFERENCE "OFS_NWINFO1_STATUS, 1, 4, 2, 25, {{896,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}, {20,VARTYPE_STRING}, {64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING}, {64,VARTYPE_STRING},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER}, {64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4150NetworkInfo 20} dts4150NetInfoPortEntry OBJECT-TYPE SYNTAX Dts4150NetInfoPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4150NetInfoPortIndex } ::= { dts4150NetInfoPortTable 1 } Dts4150NetInfoPortEntry ::= SEQUENCE { dts4150NetInfoPortIndex Integer32, dts4150NetInfoPortStatus Unsigned32, dts4150NetInfoPortLink Unsigned32, dts4150NetInfoPortMAC DisplayString, dts4150NetInfoPortIP1v4 DTSNetworkName, dts4150NetInfoPortSubnet1v4 DTSNetworkName, dts4150NetInfoPortGW1v4 DTSNetworkName, dts4150NetInfoPortIP2v4 DTSNetworkName, dts4150NetInfoPortSubnet2v4 DTSNetworkName, dts4150NetInfoPortGW2v4 DTSNetworkName, dts4150NetInfoPortDNSv4 DTSNetworkName, dts4150NetInfoPortHostname DisplayString, dts4150NetInfoPortDomain DisplayString, dts4150NetInfoPortDHCPMode EnabledDisabled, dts4150NetInfoPortIPv6linklocal DTSNetworkName, dts4150NetInfoPortIP1v6 DTSNetworkName, dts4150NetInfoPortIP2v6 DTSNetworkName, dts4150NetInfoPortIPGWv6 DTSNetworkName, dts4150NetInfoPortVLANid1 Integer32, dts4150NetInfoPortVLANPCP1 Integer32, dts4150NetInfoPortVLANid2 Integer32, dts4150NetInfoPortVLANPCP2 Integer32, dts4150NetInfoPortLAGStatus Unsigned32, dts4150NetInfoPortPTPConfig Integer32, dts4150NetInfoPortSyncE EnabledDisabled } dts4150NetInfoPortIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the network port configuration entry (only virtual). Valid index = 1 .. 4" ::= { dts4150NetInfoPortEntry 1 } dts4150NetInfoPortStatus OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port status. 0: down 1: up" ::= { dts4150NetInfoPortEntry 2 } dts4150NetInfoPortLink OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet link mode Bit 0 - 1: speed 0: Unknown 1: 10Mbit 2: 100Mbit 3: 1000Mbit Bit5: 1 = full duplex, 0 = half duplex Bit6: 1 = Link ok, 0 = Link not OK Bit7: auto negotiation enabled Example: Value = 227 --> Auto neg. enabled, link ok, 1000Mbit/full" ::= { dts4150NetInfoPortEntry 3 } dts4150NetInfoPortMAC OBJECT-TYPE SYNTAX DisplayString (SIZE(19)) MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address (xx:xx:xx:xx:xx:xx)" ::= { dts4150NetInfoPortEntry 4 } dts4150NetInfoPortIP1v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx)" ::= { dts4150NetInfoPortEntry 5 } dts4150NetInfoPortSubnet1v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 subnet mask (xxx.xxx.xxx.xxx)" ::= { dts4150NetInfoPortEntry 6 } dts4150NetInfoPortGW1v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) of the gateway" ::= { dts4150NetInfoPortEntry 7 } dts4150NetInfoPortIP2v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx)" ::= { dts4150NetInfoPortEntry 8 } dts4150NetInfoPortSubnet2v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 subnet mask (xxx.xxx.xxx.xxx)" ::= { dts4150NetInfoPortEntry 9 } dts4150NetInfoPortGW2v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) of the gateway" ::= { dts4150NetInfoPortEntry 10} dts4150NetInfoPortDNSv4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) of the nameserver" ::= { dts4150NetInfoPortEntry 11 } dts4150NetInfoPortHostname OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Hostname of the DTS." ::= { dts4150NetInfoPortEntry 12 } dts4150NetInfoPortDomain OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Domain name of the DTS." ::= { dts4150NetInfoPortEntry 13 } dts4150NetInfoPortDHCPMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION "DHCP mode. 0: DHCP disabled 1: DHCP enabled" ::= { dts4150NetInfoPortEntry 14 } dts4150NetInfoPortIPv6linklocal OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IP V6 link local network address (xxxx:xxxx::xxxx)" ::= { dts4150NetInfoPortEntry 15 } dts4150NetInfoPortIP1v6 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IP V6 network address 1 (xxxx:xxxx::xxxx)" ::= { dts4150NetInfoPortEntry 16 } dts4150NetInfoPortIP2v6 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IP V6 network address 2 (xxxx:xxxx::xxxx)" ::= { dts4150NetInfoPortEntry 17 } dts4150NetInfoPortIPGWv6 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IP V6 gateway address (xxxx:xxxx::xxxx)" ::= { dts4150NetInfoPortEntry 18 } dts4150NetInfoPortVLANid1 OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN-ID." ::= { dts4150NetInfoPortEntry 19 } dts4150NetInfoPortVLANPCP1 OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN-PCP QoS." ::= { dts4150NetInfoPortEntry 20 } dts4150NetInfoPortVLANid2 OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN-ID." ::= { dts4150NetInfoPortEntry 21 } dts4150NetInfoPortVLANPCP2 OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN-PCP QoS." ::= { dts4150NetInfoPortEntry 22 } dts4150NetInfoPortLAGStatus OBJECT-TYPE SYNTAX Unsigned32 (0..1|255) MAX-ACCESS read-only STATUS current DESCRIPTION "LAG (Link-Aggregation) status. 0: LAG disabled 1: LAG enabled 255: LAG not supported" ::= { dts4150NetInfoPortEntry 23 } dts4150NetInfoPortPTPConfig OBJECT-TYPE SYNTAX Integer32 (0..12) MAX-ACCESS read-only STATUS current DESCRIPTION "Selected PTP configuration entry. 0 : PTP disable 1 .. 12 : PTP configuration entry" ::= { dts4150NetInfoPortEntry 24 } dts4150NetInfoPortSyncE OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION "SyncE mode. 0: SyncE disabled 1: SyncE enabled" ::= { dts4150NetInfoPortEntry 25 } -- ----------------------------------------------------------------- -- -- System - Network information - LAG IF -- ----------------------------------------------------------------- -- dts4150NetInfoLAGIfTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4150NetInfoLAGIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with network interface link aggregation info" REFERENCE "OFS_NWINFOLAG1_STATUS, 1, 1, 2, 17, {{84,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{20,VARTYPE_STRING},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4150NetworkInfo 30} dts4150NetInfoLAGIfEntry OBJECT-TYPE SYNTAX Dts4150NetInfoLAGIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4150NetInfoLAGIfIndex } ::= { dts4150NetInfoLAGIfTable 1 } Dts4150NetInfoLAGIfEntry ::= SEQUENCE { dts4150NetInfoLAGIfIndex Integer32, dts4150NetInfoLAGIfStatus Unsigned32, dts4150NetInfoLAGIfPollIntervall Integer32, dts4150NetInfoLAGIfLACPRate Unsigned32, dts4150NetInfoLAGIfMinLinks Integer32, dts4150NetInfoLAGIfAggregatorID Integer32, dts4150NetInfoLAGIfAggregatorNrActivePorts Integer32, dts4150NetInfoLAGIfAggregatorActorKey Integer32, dts4150NetInfoLAGIfPartnerMACAddress DisplayString, dts4150NetInfoLAGIfSlave1Status Unsigned32, dts4150NetInfoLAGIfSlave1LinkSpeed Integer32, dts4150NetInfoLAGIfSlave1LinkDuplex Unsigned32, dts4150NetInfoLAGIfSlave1LinkFailureCount Integer32, dts4150NetInfoLAGIfSlave2Status Unsigned32, dts4150NetInfoLAGIfSlave2LinkSpeed Integer32, dts4150NetInfoLAGIfSlave2LinkDuplex Unsigned32, dts4150NetInfoLAGIfSlave2LinkFailureCount Integer32 } dts4150NetInfoLAGIfIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the network port configuration entry (only virtual). Valid index = 1 .. 4" ::= { dts4150NetInfoLAGIfEntry 1 } dts4150NetInfoLAGIfStatus OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port status. 0: down 1: up" ::= { dts4150NetInfoLAGIfEntry 2 } dts4150NetInfoLAGIfPollIntervall OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Poll intervall monitoring the state." ::= { dts4150NetInfoLAGIfEntry 3 } dts4150NetInfoLAGIfLACPRate OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port status. 0: slow 1: fast" ::= { dts4150NetInfoLAGIfEntry 4 } dts4150NetInfoLAGIfMinLinks OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum active slave links required to bring the LAG link up." ::= { dts4150NetInfoLAGIfEntry 5 } dts4150NetInfoLAGIfAggregatorID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Aggregator ID." ::= { dts4150NetInfoLAGIfEntry 6 } dts4150NetInfoLAGIfAggregatorNrActivePorts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of activ network ports." ::= { dts4150NetInfoLAGIfEntry 7 } dts4150NetInfoLAGIfAggregatorActorKey OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Internal used Actor Key." ::= { dts4150NetInfoLAGIfEntry 8 } dts4150NetInfoLAGIfPartnerMACAddress OBJECT-TYPE SYNTAX DisplayString (SIZE(19)) MAX-ACCESS read-only STATUS current DESCRIPTION "Partner MAC address (xx:xx:xx:xx:xx:xx)" ::= { dts4150NetInfoLAGIfEntry 9 } dts4150NetInfoLAGIfSlave1Status OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port status. 0: down 1: up" ::= { dts4150NetInfoLAGIfEntry 10 } dts4150NetInfoLAGIfSlave1LinkSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Link speed." ::= { dts4150NetInfoLAGIfEntry 11 } dts4150NetInfoLAGIfSlave1LinkDuplex OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port duplex mode. 0: half duplex 1: full duplex" ::= { dts4150NetInfoLAGIfEntry 12 } dts4150NetInfoLAGIfSlave1LinkFailureCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Link Failure count." ::= { dts4150NetInfoLAGIfEntry 13 } dts4150NetInfoLAGIfSlave2Status OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port status. 0: down 1: up" ::= { dts4150NetInfoLAGIfEntry 14 } dts4150NetInfoLAGIfSlave2LinkSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Link speed." ::= { dts4150NetInfoLAGIfEntry 15 } dts4150NetInfoLAGIfSlave2LinkDuplex OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port duplex mode. 0: half duplex 1: full duplex" ::= { dts4150NetInfoLAGIfEntry 16 } dts4150NetInfoLAGIfSlave2LinkFailureCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Link Failure count." ::= { dts4150NetInfoLAGIfEntry 17 } -- ----------------------------------------------------------------- -- -- System - Time information -- ----------------------------------------------------------------- -- dts4150SystemTimeInfo OBJECT IDENTIFIER ::= { dts4150System 30 } dts4150TimeInfoGeneral OBJECT IDENTIFIER ::= { dts4150SystemTimeInfo 1 } dts4150TimeInfoStratum OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "DTS Stratum level (1-16). The Stratum level is the quality of the time synchronisation. Stratum: 1 = best quality Stratum 16 = not synchronized" REFERENCE "OFS_TINFO_STRATUM, 1, VARTYPE_BYTE" ::= { dts4150TimeInfoGeneral 1 } dts4150TimeInfoLastDrift OBJECT-TYPE SYNTAX Integer32 UNITS "micro seconds (us)" MAX-ACCESS read-only STATUS current DESCRIPTION "The last time drift." REFERENCE "OFS_TINFO_LASTDRIFT, 4, VARTYPE_INTEGER" ::= { dts4150TimeInfoGeneral 2 } dts4150TimeInfoLastQCorr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "When last quartz correction occured." REFERENCE "OFS_TINFO_LASTQCORR, 4, VARTYPE_DWORD" ::= { dts4150TimeInfoGeneral 3 } dts4150TimeInfoTimeSource OBJECT-TYPE SYNTAX INTEGER { none (0), gnss (1), redundantlink (2), ptp (3), gnssdcf(4), ntp(7), manual (10), oscillator (99) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current active time source: 0: none 1: GNSS 2: Redundant Link 3: PTP 4: GNSS-DCF 7: NTP 10: Manual 99: OSCILLATOR" REFERENCE "OFS_TINFO_SOURCETYPE, 1, VARTYPE_BYTE" ::= { dts4150TimeInfoGeneral 4 } dts4150TimeInfoSourceQuality OBJECT-TYPE SYNTAX Integer32 UNITS "Percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Time information reception quality of the selected source. Range: 0 .. 100%" REFERENCE "OFS_TINFO_SQUALI, 1, VARTYPE_BYTE" ::= { dts4150TimeInfoGeneral 5 } dts4150TimeInfoSourceOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "The current time source offset in nano seconds. The value is limited to -1800000000 ... 1800000000. If the offset is outside the limit, the variable will be set to the maximum positiv (2147483627) or negativ (-2147483628) value." REFERENCE "OFS_TINFO_SOFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4150TimeInfoGeneral 6 } dts4150TimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last time information from active source" REFERENCE "OFS_TINFOV2_LASTINFO, 4, VARTYPE_DWORD" ::= { dts4150TimeInfoGeneral 7 } dts4150TimeInfoSourceJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Jitter of the source" REFERENCE "OFS_TINFO_JITTER, 4, VARTYPE_DWORD" ::= { dts4150TimeInfoGeneral 8 } dts4150TimeInfoLeapSecStatus OBJECT-TYPE SYNTAX Gauge32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current Leap Second status. 0: No Leap Second detected 1: Leap Second detected" REFERENCE "OFS_TINFOV2_LEAP_SEC_DETECTED, 1, VARTYPE_BYTE" ::= { dts4150TimeInfoGeneral 30 } dts4150TimeInfoLeapSecDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the detected Leap Second. 0: No info >0: Timestamp " REFERENCE "OFS_TINFOV2_LEAP_SEC_TIMESTAMP, 4, VARTYPE_DWORD" ::= { dts4150TimeInfoGeneral 31 } dts4150TimeInfoLeapSecDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the detected Leap Second. -1: Remove 1 second 0: No info 1: Add 1 second" REFERENCE "OFS_TINFOV2_LEAP_SEC_DIRECTION, 1, VARTYPE_BYTE" ::= { dts4150TimeInfoGeneral 32 } dts4150TimeInfoLeapSecSource OBJECT-TYPE SYNTAX INTEGER { none (0), gnss (1), redundantlink (2), ptp (3), gnssdcf (4), ntp (7), manual (10) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current active time source: 0: none 1: GNSS 2: Redundant Link 3: PTP 4: GNSS-DCF 7: NTP 10: Manual" REFERENCE "OFS_TINFOV2_LEAP_SEC_SOURCE, 1, VARTYPE_BYTE" ::= { dts4150TimeInfoGeneral 33 } dts4150TimeInfoLeapSecLastDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the last implemented Leap Second. 0: No info, no Leap Second implemented >0: Timestamp " REFERENCE "OFS_TINFOV2_LEAP_SEC_LAST, 4, VARTYPE_DWORD" ::= { dts4150TimeInfoGeneral 34 } dts4150TimeInfoLeapSecLastDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the last implemented Leap Second. This second (+/-1) has to be calculated to the OFS_TINFOV2_LEAP_SEC_LAST timestamp. -1: Remove 1 second to the timestamp 0: No info 1: Add 1 second to the timestamp " REFERENCE "OFS_TINFOV2_LEAP_SEC_LAST_DIR, 1, VARTYPE_BYTE" ::= { dts4150TimeInfoGeneral 35 } -- --------------------------------- -- -- TIME INFO - GNSS synchronization -- --------------------------------- -- dts4150GNSSTimeInfo OBJECT IDENTIFIER ::= { dts4150SystemTimeInfo 10 } dts4150GNSSTimeInfoGNSSState OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Overall state of the GNSS receiver. 0: GNSS invalid 1: GNSS OK, GNSS can be used as time source" REFERENCE "OFS_GNSSINFO_GNSS_STATE, 1, VARTYPE_BYTE" ::= { dts4150GNSSTimeInfo 1 } dts4150GNSSTimeInfoSVCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of used satellites for navigation. < 4 : Not enough satellites in view >= 4 : OK, enough satellites in view" REFERENCE "OFS_GNSSINFO_SV_USED, 1, VARTYPE_BYTE" ::= { dts4150GNSSTimeInfo 5 } dts4150GNSSTimeInfoTDOP OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "TDOP value for time as int (100 equals 1.00) > 2.00 : TDOP is not accurate < 2.00 : OK, TDOP value is accurate for valid time" REFERENCE "OFS_GNSSINFO_TDOP, 4, VARTYPE_INTEGER" ::= { dts4150GNSSTimeInfo 6 } dts4150GNSSTimeInfoInternalAccuracy OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Internal receiver time accuracy (ns) > 100 : Internal accuracy bad < 100 : OK, internal accuracy is valid" REFERENCE "OFS_GNSSINFO_TACC, 4, VARTYPE_INTEGER" ::= { dts4150GNSSTimeInfo 7 } dts4150GNSSTimeInfoFixType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "GNSS fix Type, time application requires 3D-fix: 0: no fix 1: dead reckoning only 2: 2D-fix 3: 3D-fix 4: GNSS + dead reckoning combined 5: time only fix" REFERENCE "OFS_GNSSINFO_FIXE_TYPE, 1, VARTYPE_INTEGER" ::= { dts4150GNSSTimeInfo 8 } dts4150GNSSTimeInfoValidity OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the redundant operation. 0: Time invalid 1: Time OK" REFERENCE "OFS_GNSSINFO_VALIDITY_TIME, 1, VARTYPE_BYTE" ::= { dts4150GNSSTimeInfo 9 } dts4150GNSSTimeInfoSurveyInMode OBJECT-TYPE SYNTAX INTEGER { disableFixedPosition (0), fixedPosition (1), manualPosition (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Survey mode for position 0: Disabled, no Fixed Position 1: Fixed Position 2: Manual position" REFERENCE "OFS_GNSSINFO_SURVEYIN_MODE, 1, VARTYPE_BYTE" ::= { dts4150GNSSTimeInfo 10 } dts4150GNSSTimeInfoSurveyInStatus OBJECT-TYPE SYNTAX INTEGER { off(0), inprogress(1), complete (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Survey status for position 0: Disabled, no Fixed Position 1: Survey-in in-progress 2: Survey-in complete" REFERENCE "OFS_GNSSINFO_SURVEY_PROGRESS, 1, VARTYPE_BYTE" ::= { dts4150GNSSTimeInfo 11 } dts4150GNSSTimeInfoPositionLatitude OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Position latitude value as long (10000000 equals 1.00)" REFERENCE "OFS_GNSSINFO_LATITUDE, 4, VARTYPE_DWORD" ::= { dts4150GNSSTimeInfo 12 } dts4150GNSSTimeInfoPositionLongitude OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Position longitude value long (10000000 equals 1.00)" REFERENCE "OFS_GNSSINFO_LONGITUDE, 4, VARTYPE_DWORD" ::= { dts4150GNSSTimeInfo 13 } dts4150GNSSTimeInfoPositionHeightAboveSea OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Height above sea as long (1000 equals 1.00)" REFERENCE "OFS_GNSSINFO_HEIGHTABOVESEA, 4, VARTYPE_DWORD" ::= { dts4150GNSSTimeInfo 14 } dts4150GNSSTimeInfoAntennaDelay OBJECT-TYPE SYNTAX Unsigned32 (0..1000) UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Antenna cable delay in nano seconds" REFERENCE "OFS_GNSS_ANTENNA_DELAY, 4, VARTYPE_DWORD" ::= { dts4150GNSSTimeInfo 20 } dts4150GNSSTimeInfoLeapSecStatus OBJECT-TYPE SYNTAX Gauge32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current Leap Second status. 0: No Leap Second detected 1: Leap Second detected" REFERENCE "OFS_TINFOV2_GNSS_LEAP_SEC_DETECTED, 1, VARTYPE_BYTE" ::= { dts4150GNSSTimeInfo 30 } dts4150GNSSTimeInfoLeapSecDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the detected Leap Second. 0: No info >0: Timestamp " REFERENCE "OFS_TINFOV2_GNSS_LEAP_SEC_TIMESTAMP, 4, VARTYPE_DWORD" ::= { dts4150GNSSTimeInfo 31 } dts4150GNSSTimeInfoLeapSecDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the detected Leap Second. -1: Remove 1 second 0: No info 1: Add 1 second" REFERENCE "OFS_TINFOV2_GNSS_LEAP_SEC_DIRECTION, 1, VARTYPE_BYTE" ::= { dts4150GNSSTimeInfo 32 } dts4150GNSSTimeInfoJammingState OBJECT-TYPE SYNTAX INTEGER { unkonwn(0), ok(1), warning(2), critical(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Jamming/Interference status monitor 0: Unknown / disabled 1: OK - No significant jamming 2: Warning - interference visible but fix OK 3: Critical - interference visible and no fix" REFERENCE "OFS_GNSSINFO_JAMMING_STATUS, 1, VARTYPE_BYTE" ::= { dts4150GNSSTimeInfo 40 } dts4150GNSSTimeInfoJammingIndicator OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "CW Jamming indicator. 0: no CW jamming 255: strong CW jamming" REFERENCE "OFS_GNSSINFO_JAMMING_INDICATOR, 1, VARTYPE_BYTE" ::= { dts4150GNSSTimeInfo 41 } dts4150GNSSTimeInfoAGCMonitor OBJECT-TYPE SYNTAX Integer32(0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "AGC (Automatic Gain Control) Monitor" REFERENCE "OFS_GNSSINFO_AGC_MON, 2, VARTYPE_WORD" ::= { dts4150GNSSTimeInfo 42 } dts4150GNSSTimeInfoNoisePerMS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Noise Level as measured by the GPS Core" REFERENCE "OFS_GNSSINFO_NOISE_LEVEL, 2, VARTYPE_WORD" ::= { dts4150GNSSTimeInfo 43 } dts4150GNSSTimeInfoConfigured OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source configuration status. 0: Not configured 1: Configured" REFERENCE "OFS_TINFOV2_GNSS_CONFIGURED, 1, VARTYPE_BYTE" ::= { dts4150GNSSTimeInfo 60 } dts4150GNSSTimeInfoPriority OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Source priority configuration" REFERENCE "OFS_TINFOV2_GNSS_PRIORITY, 1, VARTYPE_BYTE" ::= { dts4150GNSSTimeInfo 61 } dts4150GNSSTimeInfoState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source locked status. Bit 0: Timesource reachable status Bit 1: Timesource Locked status" REFERENCE "OFS_TINFOV2_GNSS_TS_STATE, 4, VARTYPE_INTEGER" ::= { dts4150GNSSTimeInfo 62 } dts4150GNSSTimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last synchronisation time" REFERENCE "OFS_TINFOV2_GNSS_LASTTIME, 4, VARTYPE_DWORD" ::= { dts4150GNSSTimeInfo 63 } dts4150GNSSTimeInfoOffsetSec OBJECT-TYPE SYNTAX Integer32 UNITS "seconds (s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset seconds" REFERENCE "OFS_TINFOV2_GNSS_OFFSET_S, 4, VARTYPE_DWORD" ::= { dts4150GNSSTimeInfo 64 } dts4150GNSSTimeInfoOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset nano seconds" REFERENCE "OFS_TINFOV2_GNSS_OFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4150GNSSTimeInfo 65 } dts4150GNSSTimeInfoDeviation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calculated deviation in ppb." REFERENCE "OFS_TINFOV2_GNSS_DEVIATION, 4, VARTYPE_INTEGER" ::= { dts4150GNSSTimeInfo 66 } dts4150GNSSTimeInfoRating OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal calculated rating. Equivalent to priority." REFERENCE "OFS_TINFOV2_GNSS_RATING, 1, VARTYPE_BYTE" ::= { dts4150GNSSTimeInfo 67 } -- --------------------------------- -- -- Redundant Link operation -- --------------------------------- -- dts4150RedLinkTimeInfo OBJECT IDENTIFIER ::= { dts4150SystemTimeInfo 20 } dts4150RedLinkTimeInfoLinkState OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the redundant operation. 0: Not defined 1: Master role 2: Slave role" REFERENCE "OFS_TINFOV2_REDUNDANT_STATE, 1, VARTYPE_BYTE" ::= { dts4150RedLinkTimeInfo 1 } dts4150RedLinkTimeInfoLeapSecStatus OBJECT-TYPE SYNTAX Gauge32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current Leap Second status. 0: No Leap Second detected 1: Leap Second detected" REFERENCE "OFS_TINFOV2_REDUNDANT_LEAP_SEC_DETECTED, 1, VARTYPE_BYTE" ::= { dts4150RedLinkTimeInfo 30 } dts4150RedLinkTimeInfoLeapSecDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the detected Leap Second. 0: No info >0: Timestamp " REFERENCE "OFS_TINFOV2_REDUNDANT_LEAP_SEC_TIMESTAMP, 4, VARTYPE_DWORD" ::= { dts4150RedLinkTimeInfo 31 } dts4150RedLinkTimeInfoLeapSecDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the detected Leap Second. -1: Remove 1 second 0: No info 1: Add 1 second" REFERENCE "OFS_TINFOV2_REDUNDANT_LEAP_SEC_DIRECTION, 1, VARTYPE_BYTE" ::= { dts4150RedLinkTimeInfo 32 } dts4150RedLinkTimeInfoConfigured OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source configuration status. 0: Not configured 1: Configured" REFERENCE "OFS_TINFOV2_REDUNDANT_CONFIGURED, 1, VARTYPE_BYTE" ::= { dts4150RedLinkTimeInfo 60 } dts4150RedLinkTimeInfoPriority OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Source priority configuration" REFERENCE "OFS_TINFOV2_REDUNDANT_PRIORITY, 1, VARTYPE_BYTE" ::= { dts4150RedLinkTimeInfo 61 } dts4150RedLinkTimeInfoState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source locked status. Bit 0: Timesource reachable status Bit 1: Timesource Locked status" REFERENCE "OFS_TINFOV2_REDUNDANT_TS_STATE, 4, VARTYPE_INTEGER" ::= { dts4150RedLinkTimeInfo 62 } dts4150RedLinkTimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Redundant link synchronisation time (Last time received from Master as Slave)." REFERENCE "OFS_TINFOV2_REDUNDANT_LASTTIME, 4, VARTYPE_DWORD" ::= { dts4150RedLinkTimeInfo 63 } dts4150RedLinkTimeInfoOffsetSec OBJECT-TYPE SYNTAX Integer32 UNITS "seconds (s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Last measured offset to Master as Slave seconds" REFERENCE "OFS_TINFOV2_REDUNDANT_OFFSET_S, 4, VARTYPE_DWORD" ::= { dts4150RedLinkTimeInfo 64 } dts4150RedLinkTimeInfoOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Last measured offset to Master as Slave nano seconds" REFERENCE "OFS_TINFOV2_REDUNDANT_OFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4150RedLinkTimeInfo 65 } dts4150RedLinkTimeInfoDeviation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calculated deviation in ppb." REFERENCE "OFS_TINFOV2_REDUNDANT_DEVIATION, 4, VARTYPE_INTEGER" ::= { dts4150RedLinkTimeInfo 66 } dts4150RedLinkTimeInfoRating OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal calculated rating. Equivalent to priority." REFERENCE "OFS_TINFOV2_REDUNDANT_RATING, 1, VARTYPE_BYTE" ::= { dts4150RedLinkTimeInfo 67 } -- --------------------------------- -- -- TIME INFO - PTP synchronization -- --------------------------------- -- dts4150PTPTimeInfo OBJECT IDENTIFIER ::= { dts4150SystemTimeInfo 30 } dts4150PTPTimeInfoLeapSecStatus OBJECT-TYPE SYNTAX Gauge32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current Leap Second status. 0: No Leap Second detected 1: Leap Second detected" REFERENCE "OFS_TINFOV2_PTP_LEAP_SEC_DETECTED, 1, VARTYPE_BYTE" ::= { dts4150PTPTimeInfo 30 } dts4150PTPTimeInfoLeapSecDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the detected Leap Second. 0: No info >0: Timestamp " REFERENCE "OFS_TINFOV2_PTP_LEAP_SEC_TIMESTAMP, 4, VARTYPE_DWORD" ::= { dts4150PTPTimeInfo 31 } dts4150PTPTimeInfoLeapSecDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the detected Leap Second. -1: Remove 1 second 0: No info 1: Add 1 second" REFERENCE "OFS_TINFOV2_PTP_LEAP_SEC_DIRECTION, 1, VARTYPE_BYTE" ::= { dts4150PTPTimeInfo 32 } dts4150PTPTimeInfoConfigured OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source configuration status. 0: Not configured 1: Configured" REFERENCE "OFS_TINFOV2_PTP_CONFIGURED, 1, VARTYPE_BYTE" ::= { dts4150PTPTimeInfo 60 } dts4150PTPTimeInfoPriority OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Source priority configuration" REFERENCE "OFS_TINFOV2_PTP_PRIORITY, 1, VARTYPE_BYTE" ::= { dts4150PTPTimeInfo 61 } dts4150PTPTimeInfoState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source locked status. Bit 0: Timesource reachable status Bit 1: Timesource Locked status" REFERENCE "OFS_TINFOV2_PTP_TS_STATE, 4, VARTYPE_INTEGER" ::= { dts4150PTPTimeInfo 62 } dts4150PTPTimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last synchronisation time" REFERENCE "OFS_TINFOV2_PTP_LASTTIME, 4, VARTYPE_DWORD" ::= { dts4150PTPTimeInfo 63 } dts4150PTPTimeInfoOffsetSec OBJECT-TYPE SYNTAX Integer32 UNITS "seconds (s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset seconds" REFERENCE "OFS_TINFOV2_PTP_OFFSET_S, 4, VARTYPE_DWORD" ::= { dts4150PTPTimeInfo 64 } dts4150PTPTimeInfoOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset nano seconds" REFERENCE "OFS_TINFOV2_PTP_OFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4150PTPTimeInfo 65 } dts4150PTPTimeInfoDeviation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calculated deviation in ppb." REFERENCE "OFS_TINFOV2_PTP_DEVIATION, 4, VARTYPE_INTEGER" ::= { dts4150PTPTimeInfo 66 } dts4150PTPTimeInfoRating OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal calculated rating. Equivalent to priority." REFERENCE "OFS_TINFOV2_PTP_RATING, 1, VARTYPE_BYTE" ::= { dts4150PTPTimeInfo 67 } -- --------------------------------- -- -- TIME INFO - GNSS-DCF synchronization -- --------------------------------- -- dts4150DCFTimeInfo OBJECT IDENTIFIER ::= { dts4150SystemTimeInfo 40 } dts4150DCFTimeInfoSatNbr OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of satellites in view (only GPS 4500)" REFERENCE "OFS_TINFO_DCF_SAT_NBR, 1, VARTYPE_BYTE" ::= { dts4150DCFTimeInfo 4 } dts4150DCFTimeInfoSecCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter of DCF pulses (usually 0..58)" REFERENCE "OFS_TINFO_DCF_SECCNT, 4, VARTYPE_DWORD" ::= { dts4150DCFTimeInfo 5 } dts4150DCFTimeInfoLeapSecStatus OBJECT-TYPE SYNTAX Gauge32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current Leap Second status. 0: No Leap Second detected 1: Leap Second detected" REFERENCE "OFS_TINFOV2_DCF_LEAP_SEC_DETECTED, 1, VARTYPE_BYTE" ::= { dts4150DCFTimeInfo 30 } dts4150DCFTimeInfoLeapSecDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the detected Leap Second. 0: No info >0: Timestamp " REFERENCE "OFS_TINFOV2_DCF_LEAP_SEC_TIMESTAMP, 4, VARTYPE_DWORD" ::= { dts4150DCFTimeInfo 31 } dts4150DCFTimeInfoLeapSecDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the detected Leap Second. -1: Remove 1 second 0: No info 1: Add 1 second" REFERENCE "OFS_TINFOV2_DCF_LEAP_SEC_DIRECTION, 1, VARTYPE_BYTE" ::= { dts4150DCFTimeInfo 32 } dts4150DCFTimeInfoConfigured OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source configuration status. 0: Not configured 1: Configured" REFERENCE "OFS_TINFOV2_DCF_CONFIGURED, 1, VARTYPE_BYTE" ::= { dts4150DCFTimeInfo 60 } dts4150DCFTimeInfoPriority OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Source priority configuration" REFERENCE "OFS_TINFOV2_DCF_PRIORITY, 1, VARTYPE_BYTE" ::= { dts4150DCFTimeInfo 61 } dts4150DCFTimeInfoState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source locked status. Bit 0: Timesource reachable status Bit 1: Timesource Locked status" REFERENCE "OFS_TINFOV2_DCF_TS_STATE, 4, VARTYPE_INTEGER" ::= { dts4150DCFTimeInfo 62 } dts4150DCFTimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last synchronisation time" REFERENCE "OFS_TINFOV2_DCF_LASTTIME, 4, VARTYPE_DWORD" ::= { dts4150DCFTimeInfo 63 } dts4150DCFTimeInfoOffsetSec OBJECT-TYPE SYNTAX Integer32 UNITS "seconds (s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset seconds" REFERENCE "OFS_TINFOV2_DCF_OFFSET_S, 4, VARTYPE_DWORD" ::= { dts4150DCFTimeInfo 64 } dts4150DCFTimeInfoOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset nano seconds" REFERENCE "OFS_TINFOV2_DCF_OFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4150DCFTimeInfo 65 } dts4150DCFTimeInfoDeviation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calculated deviation in ppb." REFERENCE "OFS_TINFOV2_DCF_DEVIATION, 4, VARTYPE_INTEGER" ::= { dts4150DCFTimeInfo 66 } dts4150DCFTimeInfoRating OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal calculated rating. Equivalent to priority." REFERENCE "OFS_TINFOV2_DCF_RATING, 1, VARTYPE_BYTE" ::= { dts4150DCFTimeInfo 67 } -- --------------------------------- -- -- TIME INFO - NTP synchronization -- --------------------------------- -- dts4150NTPTimeInfo OBJECT IDENTIFIER ::= { dts4150SystemTimeInfo 80 } dts4150NTPTimeInfoCurrentSource OBJECT-TYPE SYNTAX OCTET STRING (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Current NTP time source (system peer)." REFERENCE "OFS_TINFO_NTP_SOURCE, 63, VARTYPE_STRING" ::= { dts4150NTPTimeInfo 1 } dts4150NTPTimeInfoSystemOffset OBJECT-TYPE SYNTAX Integer32 UNITS "micro seconds (us)" MAX-ACCESS read-only STATUS current DESCRIPTION "Current system time offset." REFERENCE "OFS_TINFO_NTP_OFFSET, 4, VARTYPE_DWORD" ::= { dts4150NTPTimeInfo 2 } dts4150NTPTimeInfoSourceJitter OBJECT-TYPE SYNTAX Integer32 UNITS "micro seconds (us)" MAX-ACCESS read-only STATUS current DESCRIPTION "Current time source jitter." REFERENCE "OFS_TINFO_NTP_JITTER, 4, VARTYPE_DWORD" ::= { dts4150NTPTimeInfo 3 } dts4150NTPTimeInfoStratum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Stratum of NTP" REFERENCE "OFS_TINFO_NTP_STRATUM, 1, VARTYPE_BYTE" ::= { dts4150NTPTimeInfo 4 } dts4150NTPTimeInfoFrequency OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frequency of NTP" REFERENCE "OFS_TINFO_NTP_FREQ, 4, VARTYPE_INTEGER" ::= { dts4150NTPTimeInfo 5 } dts4150NTPTInfoReachable OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current reach of NTP source (octal 0..377)" REFERENCE "OFS_TINFO_NTP_REACH, 1, VARTYPE_BYTE" ::= { dts4150NTPTimeInfo 6 } dts4150NTPTimeInfoLeapSecStatus OBJECT-TYPE SYNTAX Gauge32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Current Leap Second status. 0: No Leap Second detected 1: Leap Second detected" REFERENCE "OFS_TINFOV2_NTP_LEAP_SEC_DETECTED, 1, VARTYPE_BYTE" ::= { dts4150NTPTimeInfo 30 } dts4150NTPTimeInfoLeapSecDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the detected Leap Second. 0: No info >0: Timestamp " REFERENCE "OFS_TINFOV2_NTP_LEAP_SEC_TIMESTAMP, 4, VARTYPE_DWORD" ::= { dts4150NTPTimeInfo 31 } dts4150NTPTimeInfoLeapSecDir OBJECT-TYPE SYNTAX Integer32(-1..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Directon of the detected Leap Second. -1: Remove 1 second 0: No info 1: Add 1 second" REFERENCE "OFS_TINFOV2_NTP_LEAP_SEC_DIRECTION, 1, VARTYPE_BYTE" ::= { dts4150NTPTimeInfo 32 } dts4150NTPTimeInfoConfigured OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source configuration status. 0: Not configured 1: Configured" REFERENCE "OFS_TINFOV2_NTP_CONFIGURED, 1, VARTYPE_BYTE" ::= { dts4150NTPTimeInfo 60 } dts4150NTPTimeInfoPriority OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Source priority configuration" REFERENCE "OFS_TINFOV2_NTP_PRIORITY, 1, VARTYPE_BYTE" ::= { dts4150NTPTimeInfo 61 } dts4150NTPTimeInfoState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source locked status. Bit 0: Timesource reachable status Bit 1: Timesource Locked status" REFERENCE "OFS_TINFOV2_NTP_TS_STATE, 4, VARTYPE_INTEGER" ::= { dts4150NTPTimeInfo 62 } dts4150NTPTimeInfoLastTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last synchronisation time" REFERENCE "OFS_TINFOV2_NTP_LASTTIME, 4, VARTYPE_DWORD" ::= { dts4150NTPTimeInfo 63 } dts4150NTPTimeInfoOffsetSec OBJECT-TYPE SYNTAX Integer32 UNITS "seconds (s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset seconds" REFERENCE "OFS_TINFOV2_NTP_OFFSET_S, 4, VARTYPE_DWORD" ::= { dts4150NTPTimeInfo 64 } dts4150NTPTimeInfoOffsetNSec OBJECT-TYPE SYNTAX Integer32 UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual measured offset nano seconds" REFERENCE "OFS_TINFOV2_NTP_OFFSET_NS, 4, VARTYPE_DWORD" ::= { dts4150NTPTimeInfo 65 } dts4150NTPTimeInfoDeviation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Calculated deviation in ppb." REFERENCE "OFS_TINFOV2_NTP_DEVIATION, 4, VARTYPE_INTEGER" ::= { dts4150NTPTimeInfo 66 } dts4150NTPTimeInfoRating OBJECT-TYPE SYNTAX Gauge32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal calculated rating. Equivalent to priority." REFERENCE "OFS_TINFOV2_NTP_RATING, 1, VARTYPE_BYTE" ::= { dts4150NTPTimeInfo 67 } -- --------------------------------- -- -- TIME INFO - Oscillator: -- --------------------------------- -- dts4150OscTimeInfo OBJECT IDENTIFIER ::= { dts4150SystemTimeInfo 99 } dts4150OscTimeInfoPLLState OBJECT-TYPE SYNTAX INTEGER { unknown (0), initializing (1), synchronizing (2), regulating (3), holdingover (4), resynchronizing (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the PLL. 0 = UNKNOWN, 1 = INITIALIZING, 2 = SYNCHRONIZING, 3 = REGULATING, 4 = HOLDINGOVER, 5 = RESYNCHRONIZING" REFERENCE "OFS_OSCINFO_REGULATE_STATE, 1, VARTYPE_BYTE" ::= { dts4150OscTimeInfo 1 } dts4150OscTimeInfoPPSTrackingState OBJECT-TYPE SYNTAX INTEGER { none (0), poor (1), good (2), lost (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the 1pps tracking. 0 = None 1 = Poor 2 = Good 3 = Lost" REFERENCE "OFS_OSCINFO_PPS_TRACKING_STATE, 1, VARTYPE_BYTE" ::= { dts4150OscTimeInfo 2 } dts4150OscTimeInfoLockedState OBJECT-TYPE SYNTAX INTEGER { notlocked (0), locked (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the oscillator tracking. 0 = Not locked 1 = Locked" REFERENCE "OFS_OSCINFO_LOCK_STATE, 1, VARTYPE_BYTE" ::= { dts4150OscTimeInfo 3 } -- ----------------------------------------------------------------- -- -- System - Power -- ----------------------------------------------------------------- -- dts4150SystemPower OBJECT IDENTIFIER ::= { dts4150System 40 } dts4150SupplyVoltage1 OBJECT-TYPE SYNTAX Gauge32 (0..30000) UNITS "Milli volts (mV DC)" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured voltage of the power supply 1. The value is in milli volts (mV DC). Range 0 .. 30000 mV" REFERENCE "OFS_POWER_U1_MV, 4, VARTYPE_DWORD" ::= { dts4150SystemPower 1 } dts4150SupplyVoltage2 OBJECT-TYPE SYNTAX Gauge32 (0..30000) UNITS "Milli volts (mV DC)" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured voltage of the power supply 2. The value is in milli volts (mV DC). Range 0 .. 30000 mV" REFERENCE "OFS_POWER_U2_MV, 4, VARTYPE_DWORD" ::= { dts4150SystemPower 2 } -- ----------------------------------------------------------------- -- -- System - Maintenance -- ----------------------------------------------------------------- -- dts4150SystemMaintenance OBJECT IDENTIFIER ::= { dts4150System 50 } dts4150SysUpdateCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), runRamDirUpdateProcess (1), runUSBUpdateProcess(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "System software update command variable. After the update proccess the device will do a restart. 0: No action 1: Run /ram directory update proccess 2: Run USB update proccess" REFERENCE "OFS_SYSTEM_UPDATE, 1, VARTYPE_BYTE" ::= { dts4150SystemMaintenance 1 } dts4150SysBackupCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), runBackupProcess (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "System backup command variable. The current configuration files will be copied internal. 0: No action 1: Run local backup proccess" REFERENCE "OFS_SYSTEM_BACKUP, 1, VARTYPE_BYTE" ::= { dts4150SystemMaintenance 2 } dts4150SysRestoreCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), runRestoreProcess (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "System restore command variable. Restores previous created configuration files copies (by the local backup command). 0: No Action 1: Run local restore proccess" REFERENCE "OFS_SYSTEM_RESTORE, 1, VARTYPE_BYTE" ::= { dts4150SystemMaintenance 3 } dts4150SysRestartCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), reboot (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "System reboot command variable. 0: No action 1: Reboot" REFERENCE "OFS_SYSTEM_RESTART, 1, VARTYPE_BYTE" ::= { dts4150SystemMaintenance 4 } dts4150SysDefaultCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), runDefaltRestoreProcess (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "System restore command variable. Restores system to default. 0: No action 1: Run default restore proccess" REFERENCE "OFS_SYSTEM_DEFAULT, 1, VARTYPE_BYTE" ::= { dts4150SystemMaintenance 5 } dts4150SysAllChanged OBJECT-TYPE SYNTAX INTEGER { noAction (0), readAllConfigFiles (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reread all configuration files" REFERENCE "OFS_SYSTEM_ALL_CHANGED, 1, VARTYPE_BYTE" ::= { dts4150SystemMaintenance 6 } dts4150SysCopyFiles OBJECT-TYPE SYNTAX INTEGER { noAction (0), copyFilesToFlash (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Copies all telegram files and switching program files from /ram and USB to the internal flash directory." REFERENCE "OFS_SYSTEM_CPY_FILES, 1, VARTYPE_BYTE" ::= { dts4150SystemMaintenance 7 } -- ----------------------------------------------------------------- -- -- System - Versions -- ----------------------------------------------------------------- -- dts4150SystemVersions OBJECT IDENTIFIER ::= { dts4150System 60 } dts4150verFPGA OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the FPGA firmware." REFERENCE "OFS_VER_FPGA, 0, VARTYPE_STRING" ::= { dts4150SystemVersions 1 } dts4150verFPGADriver OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the FPGA linux driver software." REFERENCE "OFS_VER_DTS_FPGA, 0, VARTYPE_STRING" ::= { dts4150SystemVersions 2 } dts4150verModule OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the linux time driver software." REFERENCE "OFS_VER_DTS_TIME, 59, VARTYPE_STRING" ::= { dts4150SystemVersions 3 } dts4150verLangResource OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the menu text resource file." REFERENCE "OFS_VER_LANGUAGE, 59, VARTYPE_STRING" ::= { dts4150SystemVersions 4 } dts4150verTimezoneTable OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the time zone tables." REFERENCE "OFS_VER_SEASON, 59, VARTYPE_STRING" ::= { dts4150SystemVersions 5 } dts4150verNTP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the NTP server." REFERENCE "OFS_VER_NTPD, 59, VARTYPE_STRING" ::= { dts4150SystemVersions 6 } dts4150verLinux OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the linux kernel." REFERENCE "OFS_VER_KERNEL, 59, VARTYPE_STRING" ::= { dts4150SystemVersions 7 } dts4150verCLIShell OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the command line shell." REFERENCE "OFS_VER_BUSYBOX, 59, VARTYPE_STRING" ::= { dts4150SystemVersions 8 } dts4150verRootFS OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the root file system." REFERENCE "OFS_VER_FILESYS, 59, VARTYPE_STRING" ::= { dts4150SystemVersions 9 } dts4150verSNMPMasterAgent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the SNMP master agent." REFERENCE "OFS_VER_SNMPMASTER, 59, VARTYPE_STRING" ::= { dts4150SystemVersions 10 } dts4150verSNMPSubAgent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the SNMP sub agent." REFERENCE "OFS_VER_SNMPSUBAGENT, 59, VARTYPE_STRING" ::= { dts4150SystemVersions 11 } dts4150verApplication OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the DTS application software." REFERENCE "OFS_VER_DTS4150, 59, VARTYPE_STRING" ::= { dts4150SystemVersions 12 } dts4150verPTP4L OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of the ptp software." REFERENCE "OFS_VER_PTP4L, 59, VARTYPE_STRING" ::= { dts4150SystemVersions 13 } -- ----------------------------------------------------------------- -- -- System - Product information -- ----------------------------------------------------------------- -- dts4150ProdInfo OBJECT IDENTIFIER ::= { dts4150System 70 } dts4150ProdInfoHWCode OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "DTS device type code. 1.Byte = 4 (Hardware), 8 (Software) 2.Byte = x (device main group) 3.Byte = y (device function) 4.Byte = z (device variants) 5.-8.Byte = reserved DTS4150 -> 4.1.5.0 x=1,y=5,z=0" REFERENCE "OFS_PROD_HW_CODE, 8, VARTYPE_BYTEARR" ::= { dts4150ProdInfo 1 } dts4150ProdInfoHWName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..59)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the DTS device (type)." REFERENCE "OFS_PROD_HW_NAME, 59, VARTYPE_STRING" ::= { dts4150ProdInfo 2 } dts4150ProdInfoHWRevision OBJECT-TYPE SYNTAX DisplayString (SIZE(1..19)) MAX-ACCESS read-only STATUS current DESCRIPTION "Hardware revision of the DTS device." REFERENCE "OFS_PROD_HW_VER, 19, VARTYPE_STRING" ::= { dts4150ProdInfo 3 } dts4150ProdInfoProdNo OBJECT-TYPE SYNTAX DisplayString (SIZE(1..19)) MAX-ACCESS read-only STATUS current DESCRIPTION "Product number (serial number) of the DTS device." REFERENCE "OFS_PROD_PROD_NR, 20, VARTYPE_STRING" ::= { dts4150ProdInfo 4 } dts4150ProdInfoArticleNo OBJECT-TYPE SYNTAX DisplayString (SIZE(1..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Article number of the DTS device." REFERENCE "OFS_PROD_ART_NR, 8, VARTYPE_STRING" ::= { dts4150ProdInfo 5 } dts4150ProdInfoFirmwareVer OBJECT-TYPE SYNTAX DisplayString (SIZE(1..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "Firmware version of the DTS device." REFERENCE "OFS_PROD_FIRMW_VER, 40, VARTYPE_STRING" ::= { dts4150ProdInfo 6 } dts4150SysConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "System configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_GEN_CHANGED, 1, VARTYPE_BYTE" ::= { dts4150System 100 } dts4150SysConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_GEN_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4150System 101 } -- ----------------------------------------------------------------- -- -- Network -- ----------------------------------------------------------------- -- dts4150Network OBJECT IDENTIFIER ::= { dts4150MIB 2 } -- ----------------------------------------------------------------- -- -- Network - Network Ports -- ----------------------------------------------------------------- -- dts4150NetworkPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4150NetworkPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with network port configuration" REFERENCE "OFS_NW1_LINK, 1, 4, 2, 11, {{36,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4150Network 10} dts4150NetworkPortEntry OBJECT-TYPE SYNTAX Dts4150NetworkPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4150NetworkPortIndex } ::= { dts4150NetworkPortTable 1 } Dts4150NetworkPortEntry ::= SEQUENCE { dts4150NetworkPortIndex Integer32, dts4150NetworkPortLinkMode Unsigned32, dts4150NetworkPortPTPSupport EnabledDisabled, dts4150NetworkPortPTPConfig Integer32, dts4150NetworkPortLAGSupport EnabledDisabled, dts4150NetworkPortLAGConfig Integer32, dts4150NetworkPortSyncESupport EnabledDisabled, dts4150NetworkPortSyncEConfig Integer32, dts4150NetworkPortCfgChanged Unsigned32, dts4150NetworkPortConfigCmd INTEGER, dts4150NetworkPortConfigChangedTime TimeTicks } dts4150NetworkPortIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the network port configuration entry (only virtual). Valid index = 1 .. 4" ::= { dts4150NetworkPortEntry 1 } dts4150NetworkPortLinkMode OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Ethernet link mode Bit 0 - 1: speed 2: 100Mbit 3: 1000Mbit Bit5: 1 = full duplex, 0 = half duplex Bit7: 1 = auto negotiation enabled, 0 = disabled" ::= { dts4150NetworkPortEntry 2 } dts4150NetworkPortPTPSupport OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION " PTP Output support. 0: Port has no PTP support 1: Port supports PTP" ::= { dts4150NetworkPortEntry 3 } dts4150NetworkPortPTPConfig OBJECT-TYPE SYNTAX Integer32 (0..12) MAX-ACCESS read-write STATUS current DESCRIPTION "Index from the PTP configuration entry table. 0 : PTP disable 1 .. 3 : Index PTP configuration table entry" ::= { dts4150NetworkPortEntry 4 } dts4150NetworkPortLAGSupport OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION " LAG Output support. 0 : Port has no LAG support 1 : Port supports LAG" ::= { dts4150NetworkPortEntry 5 } dts4150NetworkPortLAGConfig OBJECT-TYPE SYNTAX Integer32 (0..4) MAX-ACCESS read-write STATUS current DESCRIPTION "Index from the LAG configuration entry table. 0: LAG disable 1 .. 1 : Index LAG configuration table entry" ::= { dts4150NetworkPortEntry 6 } dts4150NetworkPortSyncESupport OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION " SyncE ESMC Output support. 0 : Port has no SyncE ESMC support 1 : Port supports SyncE ESMC" ::= { dts4150NetworkPortEntry 7 } dts4150NetworkPortSyncEConfig OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration of ESMC output. 0: ESMC disable 1: ESMC enable" ::= { dts4150NetworkPortEntry 8 } dts4150NetworkPortCfgChanged OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Network port configuration changed variable. 0: No configuration change 1: Configuration has changed" ::= { dts4150NetworkPortEntry 9 } dts4150NetworkPortConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Network port configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" ::= { dts4150NetworkPortEntry 10 } dts4150NetworkPortConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." ::= { dts4150NetworkPortEntry 11 } -- ----------------------------------------------------------------- -- -- Network - LAG Interfaces -- ----------------------------------------------------------------- -- dts4150NetworkLAGIFTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4150NetworkLAGIFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with network link aggragation configuration" REFERENCE "OFS_NWLAG1_MODE, 1, 1, 2, 7, {{28,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4150Network 20} dts4150NetworkLAGIFEntry OBJECT-TYPE SYNTAX Dts4150NetworkLAGIFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4150NetworkLAGIFIndex } ::= { dts4150NetworkLAGIFTable 1 } Dts4150NetworkLAGIFEntry ::= SEQUENCE { dts4150NetworkLAGIFIndex Integer32, dts4150NetworkLAGIFMode Unsigned32, dts4150NetworkLAGIFLACPRate Unsigned32, dts4150NetworkLAGIFMiiMon Unsigned32, dts4150NetworkLAGIFCfgChanged Unsigned32, dts4150NetworkLAGIFConfigCmd INTEGER, dts4150NetworkLAGIFConfigChangedTime TimeTicks } dts4150NetworkLAGIFIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the LAG interface configuration entry (only virtual). Valid index = 1 .. 1" ::= { dts4150NetworkLAGIFEntry 1 } dts4150NetworkLAGIFMode OBJECT-TYPE SYNTAX Unsigned32 (0..6) MAX-ACCESS read-write STATUS current DESCRIPTION "Link Aggregation Mode. 0: balance-rr 1: active-backup 2: balance-xor 3: broadcast 4: 802.3ad 5: balance-tlb 6: balance-alb" ::= { dts4150NetworkLAGIFEntry 2 } dts4150NetworkLAGIFLACPRate OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Rate to transmit LACPDU packets in 802.3ad mode. 0: slow, transmit LACPDUs every 30 seconds. 1: fast, transmit LACPDUs every 1 second." ::= { dts4150NetworkLAGIFEntry 3 } dts4150NetworkLAGIFMiiMon OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "MII link monitoring frequency in milliseconds. 0: disable 1-255: monitoring frequency in milliseconds" ::= { dts4150NetworkLAGIFEntry 4 } dts4150NetworkLAGIFCfgChanged OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "LAG Network interface configuration changed variable. 0: No configuration change 1: Configuration has changed" ::= { dts4150NetworkLAGIFEntry 5 } dts4150NetworkLAGIFConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "LAG Network configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" ::= { dts4150NetworkLAGIFEntry 6 } dts4150NetworkLAGIFConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." ::= { dts4150NetworkLAGIFEntry 7 } -- ----------------------------------------------------------------- -- -- Network - Network IP Configuration -- ----------------------------------------------------------------- -- dts4150NetworkIPCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4150NetworkIPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with network interface configuration" REFERENCE "OFS_NW1_IP_MODE, 1, 4, 2, 34, {{1216,VARTYPE_STRUCTARR}, {4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING}, {4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{64,VARTYPE_STRING}, {4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}, {64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}, {64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER} ,{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4150Network 30} dts4150NetworkIPCfgEntry OBJECT-TYPE SYNTAX Dts4150NetworkIPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4150NetworkIPCfgIndex } ::= { dts4150NetworkIPCfgTable 1 } Dts4150NetworkIPCfgEntry ::= SEQUENCE { dts4150NetworkIPCfgIndex Integer32, dts4150NetworkIPCfgMode Unsigned32, dts4150NetworkIPCfgIP1v4 DTSNetworkName, dts4150NetworkIPCfgIPMask1v4 DTSNetworkName, dts4150NetworkIPCfgIPGateway1v4 DTSNetworkName, dts4150NetworkIPCfgIP2v4 DTSNetworkName, dts4150NetworkIPCfgIPMask2v4 DTSNetworkName, dts4150NetworkIPCfgIPGateway2v4 DTSNetworkName, dts4150NetworkIPCfgDHCPMode EnabledDisabled, dts4150NetworkIPCfgHostname DisplayString, dts4150NetworkIPCfgDomain DisplayString, dts4150NetworkIPCfgIPNameserver DTSNetworkName, dts4150NetworkIPCfgIPv6AutoConf EnabledDisabled, dts4150NetworkIPCfgIPv6DHCPMode EnabledDisabled, dts4150NetworkIPCfgIPv6Addr1 DTSNetworkName, dts4150NetworkIPCfgIPv6Prefix1 Unsigned32, dts4150NetworkIPCfgIPv6Gateway1 DTSNetworkName, dts4150NetworkIPCfgIPv6Addr2 DTSNetworkName, dts4150NetworkIPCfgIPv6Prefix2 Unsigned32, dts4150NetworkIPCfgIPv6Gateway2 DTSNetworkName, dts4150NetworkIPCfgIPv6Nameserver DTSNetworkName, dts4150NetworkIPCfgVLANMember1 Unsigned32, dts4150NetworkIPCfgVLANMember2 Unsigned32, dts4150NetworkIPCfgIP1v4RouteDest1 DTSNetworkName, dts4150NetworkIPCfgIP1v4RoutePrefix1 Unsigned32, dts4150NetworkIPCfgIP1v4RouteDest2 DTSNetworkName, dts4150NetworkIPCfgIP1v4RoutePrefix2 Unsigned32, dts4150NetworkIPCfgIP2v4RouteDest1 DTSNetworkName, dts4150NetworkIPCfgIP2v4RoutePrefix1 Unsigned32, dts4150NetworkIPCfgIP2v4RouteDest2 DTSNetworkName, dts4150NetworkIPCfgIP2v4RoutePrefix2 Unsigned32, dts4150NetworkIPCfgChanged Unsigned32, dts4150NetworkIPCfgConfigCmd INTEGER, dts4150NetworkIPCfgConfigChangedTime TimeTicks } dts4150NetworkIPCfgIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the network interface configuration entry (only virtual). Valid index = 1 .. 4" ::= { dts4150NetworkIPCfgEntry 1 } dts4150NetworkIPCfgMode OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Assigned network port / LAG interface. 0: no assignment. 1 .. 16: Network Port 65 .. 68: LAG Interface" ::= { dts4150NetworkIPCfgEntry 2 } dts4150NetworkIPCfgIP1v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx)" ::= { dts4150NetworkIPCfgEntry 3 } dts4150NetworkIPCfgIPMask1v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 subnet mask (xxx.xxx.xxx.xxx)" ::= { dts4150NetworkIPCfgEntry 4 } dts4150NetworkIPCfgIPGateway1v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) of the gateway" ::= { dts4150NetworkIPCfgEntry 5 } dts4150NetworkIPCfgIP2v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx)" ::= { dts4150NetworkIPCfgEntry 6 } dts4150NetworkIPCfgIPMask2v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 subnet mask (xxx.xxx.xxx.xxx)" ::= { dts4150NetworkIPCfgEntry 7 } dts4150NetworkIPCfgIPGateway2v4 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) of the gateway" ::= { dts4150NetworkIPCfgEntry 8 } dts4150NetworkIPCfgDHCPMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP mode. 0: DHCP disabled 1: DHCP enabled" ::= { dts4150NetworkIPCfgEntry 9 } dts4150NetworkIPCfgHostname OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Hostname of the DTS." ::= { dts4150NetworkIPCfgEntry 10 } dts4150NetworkIPCfgDomain OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Domain name of the DTS." ::= { dts4150NetworkIPCfgEntry 11 } dts4150NetworkIPCfgIPNameserver OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) of the nameserver" ::= { dts4150NetworkIPCfgEntry 12 } dts4150NetworkIPCfgIPv6AutoConf OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "Auto configuration mode IP V6. 0: Auto conf disabled 1: Auto conf enabled" ::= { dts4150NetworkIPCfgEntry 13 } dts4150NetworkIPCfgIPv6DHCPMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP mode IP V6. 0: DHCP disabled 1: DHCP enabled" ::= { dts4150NetworkIPCfgEntry 14 } dts4150NetworkIPCfgIPv6Addr1 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 network address 1 (xxxx:xxxx::xxxx)" ::= { dts4150NetworkIPCfgEntry 15 } dts4150NetworkIPCfgIPv6Prefix1 OBJECT-TYPE SYNTAX Unsigned32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 subnet prefix 1" ::= { dts4150NetworkIPCfgEntry 16 } dts4150NetworkIPCfgIPv6Gateway1 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 network address (xxxx:xxxx::xxxx) of the gateway 1" ::= { dts4150NetworkIPCfgEntry 17 } dts4150NetworkIPCfgIPv6Addr2 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 network address 1 (xxxx:xxxx::xxxx)" ::= { dts4150NetworkIPCfgEntry 18 } dts4150NetworkIPCfgIPv6Prefix2 OBJECT-TYPE SYNTAX Unsigned32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 subnet prefix 1" ::= { dts4150NetworkIPCfgEntry 19 } dts4150NetworkIPCfgIPv6Gateway2 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 network address (xxxx:xxxx::xxxx) of the gateway 2" ::= { dts4150NetworkIPCfgEntry 20 } dts4150NetworkIPCfgIPv6Nameserver OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 network address (xxxx:xxxx::xxxx) of the nameserver" ::= { dts4150NetworkIPCfgEntry 21 } dts4150NetworkIPCfgVLANMember1 OBJECT-TYPE SYNTAX Unsigned32 (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN Configuration 1. 0: VLAN disabled 1 .. 8 : VLAN configuration entry" ::= { dts4150NetworkIPCfgEntry 22 } dts4150NetworkIPCfgVLANMember2 OBJECT-TYPE SYNTAX Unsigned32 (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN Configuration 2. 0: VLAN disabled 1 .. 8 : VLAN configuration entry" ::= { dts4150NetworkIPCfgEntry 23 } dts4150NetworkIPCfgIP1v4RouteDest1 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route destination 1 (xxx.xxx.xxx.xxx)" ::= { dts4150NetworkIPCfgEntry 24 } dts4150NetworkIPCfgIP1v4RoutePrefix1 OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route prefix 1" ::= { dts4150NetworkIPCfgEntry 25 } dts4150NetworkIPCfgIP1v4RouteDest2 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route destination 2 (xxx.xxx.xxx.xxx)" ::= { dts4150NetworkIPCfgEntry 26 } dts4150NetworkIPCfgIP1v4RoutePrefix2 OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route prefix 2" ::= { dts4150NetworkIPCfgEntry 27 } dts4150NetworkIPCfgIP2v4RouteDest1 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route destination 1 (xxx.xxx.xxx.xxx)" ::= { dts4150NetworkIPCfgEntry 28 } dts4150NetworkIPCfgIP2v4RoutePrefix1 OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route prefix 1" ::= { dts4150NetworkIPCfgEntry 29 } dts4150NetworkIPCfgIP2v4RouteDest2 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(15)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route destination 2 (xxx.xxx.xxx.xxx)" ::= { dts4150NetworkIPCfgEntry 30 } dts4150NetworkIPCfgIP2v4RoutePrefix2 OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 IP1 static route prefix 2" ::= { dts4150NetworkIPCfgEntry 31 } dts4150NetworkIPCfgChanged OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Network interface configuration changed variable. 0: No configuration change 1: Configuration has changed" ::= { dts4150NetworkIPCfgEntry 32 } dts4150NetworkIPCfgConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Network interface 0 configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" ::= { dts4150NetworkIPCfgEntry 33 } dts4150NetworkIPCfgConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." ::= { dts4150NetworkIPCfgEntry 34 } -- ----------------------------------------------------------------- -- -- Network - Network VLAN Configuration -- ----------------------------------------------------------------- -- dts4150NetworkVLANCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4150NetworkVLANCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with network VLAN configuration" REFERENCE "OFS_NWVLAN1_NAME, 1, 8, 2, 15, {{120,VARTYPE_STRUCTARR}, {64,VARTYPE_STRING},{4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}}" ::= { dts4150Network 50} dts4150NetworkVLANCfgEntry OBJECT-TYPE SYNTAX Dts4150NetworkVLANCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4150NetworkVLANCfgIndex } ::= { dts4150NetworkVLANCfgTable 1 } Dts4150NetworkVLANCfgEntry ::= SEQUENCE { dts4150NetworkVLANCfgIndex Integer32, dts4150NetworkVLANCfgName DisplayString, dts4150NetworkVLANCfgID Unsigned32, dts4150NetworkVLANQosBK Unsigned32, dts4150NetworkVLANQosBE Unsigned32, dts4150NetworkVLANQosEE Unsigned32, dts4150NetworkVLANQosCA Unsigned32, dts4150NetworkVLANQosVI Unsigned32, dts4150NetworkVLANQosVO Unsigned32, dts4150NetworkVLANQosIC Unsigned32, dts4150NetworkVLANQosNC Unsigned32, dts4150NetworkVLANQosPCP Unsigned32, dts4150NetworkVLANCfgChanged Unsigned32, dts4150NetworkVLANConfigCmd INTEGER, dts4150NetworkVLANConfigChangedTime TimeTicks } dts4150NetworkVLANCfgIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the VLAN configuration entry (only virtual). Valid index = 1 .. 8" ::= { dts4150NetworkVLANCfgEntry 1 } dts4150NetworkVLANCfgName OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN descriptive name" ::= { dts4150NetworkVLANCfgEntry 2 } dts4150NetworkVLANCfgID OBJECT-TYPE SYNTAX Unsigned32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN ID: 1 .. 4094" ::= { dts4150NetworkVLANCfgEntry 3 } dts4150NetworkVLANQosBK OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Background (BK) Priority: 0 .. 7" ::= { dts4150NetworkVLANCfgEntry 4 } dts4150NetworkVLANQosBE OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Best Effort (BE) Priority: 0 .. 7" ::= { dts4150NetworkVLANCfgEntry 5 } dts4150NetworkVLANQosEE OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Excellent Effort (EE) Priority: 0 .. 7" ::= { dts4150NetworkVLANCfgEntry 6 } dts4150NetworkVLANQosCA OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Critical Applications (CA) Priority: 0 .. 7" ::= { dts4150NetworkVLANCfgEntry 7 } dts4150NetworkVLANQosVI OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Video (VI) Priority: 0 .. 7" ::= { dts4150NetworkVLANCfgEntry 8 } dts4150NetworkVLANQosVO OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "BTraffic type: Voice (VO) Priority: 0 .. 7" ::= { dts4150NetworkVLANCfgEntry 9 } dts4150NetworkVLANQosIC OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Internetwork Control (IC) Priority: 0 .. 7" ::= { dts4150NetworkVLANCfgEntry 10 } dts4150NetworkVLANQosNC OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic type: Network Control (NC) Priority: 0 .. 7" ::= { dts4150NetworkVLANCfgEntry 11 } dts4150NetworkVLANQosPCP OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN QoSPCP Priority: 0 .. 7" ::= { dts4150NetworkVLANCfgEntry 12 } dts4150NetworkVLANCfgChanged OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Network interface configuration changed variable. 0: No configuration change 1: Configuration has changed" ::= { dts4150NetworkVLANCfgEntry 13 } dts4150NetworkVLANConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Network VLAN configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" ::= { dts4150NetworkVLANCfgEntry 14 } dts4150NetworkVLANConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last VLAN configuration change." ::= { dts4150NetworkVLANCfgEntry 15 } -- ----------------------------------------------------------------- -- -- Network Services -- ----------------------------------------------------------------- -- dts4150NetServices OBJECT IDENTIFIER ::= { dts4150MIB 3 } dts4150TelnetMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "Telnet mode. 0: disabled, 1: enabled" REFERENCE "OFS_SERVICE_TELNET, 1, VARTYPE_BYTE" ::= { dts4150NetServices 1 } dts4150FTPMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "FTP mode. 0: disabled, 1: enabled" REFERENCE "OFS_SERVICE_FTP, 1, VARTYPE_BYTE" ::= { dts4150NetServices 2 } dts4150SSHMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "SSH mode. 0: disabled, 1: enabled" REFERENCE "OFS_SERVICE_SSH, 1, VARTYPE_BYTE" ::= { dts4150NetServices 3 } dts4150NetServicesConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Network services configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_SERVICE_CHANGED, 1, VARTYPE_BYTE" ::= { dts4150NetServices 100 } dts4150NetServicesConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_SERVICE_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4150NetServices 101 } -- ----------------------------------------------------------------- -- -- Time handling -- ----------------------------------------------------------------- -- dts4150TimeHandling OBJECT IDENTIFIER ::= { dts4150MIB 4 } -- ----------------------------------------------------------------- -- -- Time handling - Time source -- ----------------------------------------------------------------- -- dts4150TimeSource OBJECT IDENTIFIER ::= { dts4150TimeHandling 1 } dts4150TimeSourcePriority OBJECT IDENTIFIER ::= { dts4150TimeSource 1 } dts4150TimeSourcePriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4150TimeSourcePriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with time sources" REFERENCE "OFS_TIME_TS_PRIORITY1, 1, 4, 2, 3, {{12,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4150TimeSourcePriority 1 } dts4150TimeSourcePriorityEntry OBJECT-TYPE SYNTAX Dts4150TimeSourcePriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4150TimeSourcePriorityIndex } ::= { dts4150TimeSourcePriorityTable 1 } Dts4150TimeSourcePriorityEntry ::= SEQUENCE { dts4150TimeSourcePriorityIndex Integer32, dts4150TimeSourcePriorityType INTEGER, dts4150TimeSourcePriorityAcc Unsigned32 } dts4150TimeSourcePriorityIndex OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the time source priority table (only virtual). Valid index = 1 .. 5" ::= { dts4150TimeSourcePriorityEntry 1 } dts4150TimeSourcePriorityType OBJECT-TYPE SYNTAX INTEGER { none (0), gnss (1), redundantlink (2), ptp (3), gnssdcf(4), ntp (7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configured time source: 0: none 1: GNSS 2: Redundant Link 3: PTP 4: GNSS-DCF 7: NTP" ::= { dts4150TimeSourcePriorityEntry 2 } dts4150TimeSourcePriorityAcc OBJECT-TYPE SYNTAX Unsigned32 (100..100000) UNITS "nano seconds (ns)" MAX-ACCESS read-only STATUS current DESCRIPTION "Unused, future parameter" ::= { dts4150TimeSourcePriorityEntry 3 } dts4150TimeSourcePriorityMode OBJECT-TYPE SYNTAX INTEGER { auto (0), manual (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configured time source priority mode: 0: auto, priority defined automatically by dts analyzing the sources 1: manual, priority defined by user" REFERENCE "OFS_TIME_TS_MODE, 1, VARTYPE_BYTE" ::= { dts4150TimeSourcePriority 2 } dts4150TSTimezone OBJECT-TYPE SYNTAX Unsigned32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Time zone for the selected time source (excluding NTP). 0: UTC 1-99: See user manual 800870, time zone table" REFERENCE "OFS_TIME_SOURCE_TZ, 1, VARTYPE_BYTE" ::= { dts4150TimeSource 2 } dts4150TSStratumMode OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Configured stratum level of the DTS. 0: Automatic Stratum level calculation 1-15: Fix Stratum level" REFERENCE "OFS_TIME_CSTRATUM, 1, VARTYPE_BYTE" ::= { dts4150TimeSource 3 } dts4150TSStratumErrorLimit OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Stratum level limit to generate an alarm. Valid range 1-16" REFERENCE "OFS_TIME_ESTRATUM, 1, VARTYPE_BYTE" ::= { dts4150TimeSource 4 } dts4150TSTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..2160) UNITS "minute" MAX-ACCESS read-write STATUS current DESCRIPTION "Time duration to set an alarm after a time source failure. Range 1-2160 minutes" REFERENCE "OFS_TIME_SOURCE_TO, 4, VARTYPE_DWORD" ::= { dts4150TimeSource 5 } dts4150TSStratumTimeout1 OBJECT-TYPE SYNTAX Unsigned32 (1..9999) UNITS "hour" MAX-ACCESS read-write STATUS current DESCRIPTION "Time duration to increase the stratum level from 0 to 16 in case of a source failure. Range 1-9999 hours" REFERENCE "OFS_TIME_STRATUM_TO, 4, VARTYPE_DWORD" ::= { dts4150TimeSource 6 } dts4150TSOffsetPerStratum OBJECT-TYPE SYNTAX Unsigned32 (0..40000) UNITS "milli seconds (ms)" MAX-ACCESS read-write STATUS current DESCRIPTION "Time offset to calculate the stratum level in case of a resumed time synchronisation. Range 0-40000 ms E.g. -configured offset per stratum 30 ms -measured offset 150 ms -> Stratum level = 150/30 = 5" REFERENCE "OFS_TIME_STRATUM_OFS, 4, VARTYPE_DWORD" ::= { dts4150TimeSource 7 } dts4150TSStratumChangeSourceFail OBJECT-TYPE SYNTAX INTEGER { default (0), immediate (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Behavior of Stratum after time source lost: 0: DEFAULT - Default decrease of stratum level. 1: IMMEDIATE - Stratum is decreased immediate after time source lost." REFERENCE "OFS_TIME_STRATUM_CHANGE_SOURCE_FAIL, 4, VARTYPE_DWORD" ::= { dts4150TimeSource 8 } dts4150TSMaxOffsetForTimeValid OBJECT-TYPE SYNTAX Unsigned32 (100..250000000) UNITS "nano seconds (ns)" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum time offset to set time valid at startup. Range 100-250000000 ns" REFERENCE "OFS_TIME_OK_OFS, 4, VARTYPE_DWORD" ::= { dts4150TimeSource 9 } dts4150TSAdjustmentMode OBJECT-TYPE SYNTAX INTEGER { follow (0), set (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Behavior of the time adjusment: 0: FOLLOW - Adjust the time with a configured limited speed. Takes a longer time to correct the time offset. 1: SET - Adjust the time with some big steps." REFERENCE "OFS_TIME_COR_MODE, 1, VARTYPE_BYTE" ::= { dts4150TimeSource 10 } dts4150TSMaxAdjusmentSpeed OBJECT-TYPE SYNTAX Unsigned32 (0..10000000) UNITS "nano seconds per seconds (ns/s)" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum adjusment speed in mode FOLLOW Range 0..10000000 ns/s" REFERENCE "OFS_TIME_MAX_CORR, 4, VARTYPE_DWORD" ::= { dts4150TimeSource 11 } dts4150TSQuartzType OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of the DTS core. Range 0..255 (default 1)" REFERENCE "OFS_TIME_QUARTZ_TYP, 1, VARTYPE_BYTE" ::= { dts4150TimeSource 12 } dts4150TSOffsetSynchOnly OBJECT-TYPE SYNTAX Unsigned32 (0 | 1000..5000000) UNITS "nano seconds (ns)" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum time offset to adjust the time. If the time offset is larger than this value an alarm is generated and the time is no longer adjusted. Range 1000-5000000 ns (1us-5ms) 0: Synchronisation only is disabled" REFERENCE "OFS_TIME_SYN_ONLY, 4, VARTYPE_DWORD" ::= { dts4150TimeSource 13 } dts4150TSLeapSecMode OBJECT-TYPE SYNTAX INTEGER { none (0), insert1Second (1), auto (2), cutOff1Second (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of the leap second 0: None 1: Insert 1 second at the leap date/time 2: Auto 255: Cut off 1 second at the leap date/time" REFERENCE "OFS_TIME_LEAP_SEC_MODE, 1, VARTYPE_BYTE" ::= { dts4150TimeSource 14 } dts4150TSLeapSecDate OBJECT-TYPE SYNTAX DisplayString UNITS "Date/Time string hh:mm:ss DD.MM.YY" MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the system time (UTC) of the leap second. Format: ASCII string = hh:mm:ss DD.MM.YY" REFERENCE "OFS_TIME_LEAP_SEC_DATE, 17, VARTYPE_STRING" ::= { dts4150TimeSource 15 } dts4150TSRTCMode OBJECT-TYPE SYNTAX INTEGER { off (0), on (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "RTC (Real Time Clock) mode: 0: off 1: on" REFERENCE "OFS_TIME_RTC_MODE, 1, VARTYPE_BYTE" ::= { dts4150TimeSource 16 } dts4150TSAlarmBigOffset OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) UNITS "nano seconds (ns)" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum time offset to source for alarm Time source big offset. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_TIME_AL_BIG_OFS, 4, VARTYPE_DWORD" ::= { dts4150TimeSource 17 } dts4150TSConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Time source configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_TIME_CHANGED, 1, VARTYPE_BYTE" ::= { dts4150TimeSource 100 } dts4150TSConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_TIME_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4150TimeSource 101 } -- ----------------------------------------------------------------- -- -- Time handling - GNSS config -- ----------------------------------------------------------------- -- dts4150TimeGNSSConfig OBJECT IDENTIFIER ::= { dts4150TimeHandling 10 } dts4150GNSSConstellationMode OBJECT-TYPE SYNTAX INTEGER { gnssGPS (0), gnssGalileo (1), gnssGLONASS (2), gnssBeiDou (3), gnssGPSGalileo (4), gnssGPSGalileoGLONASS (5), gnssGPSGalileoBeiDou (6), gnssGPSGLONASS (7), gnssGPSBeiDou (8), gnssGalileoGLONASS (9), gnssGalileoBeiDou (10), gnssGLONASSBeiDou (11) } MAX-ACCESS read-write STATUS current DESCRIPTION "GNSS constellation mode used for navigation solution 0: GPS 1: Galileo 2: GLONASS 3: BeiDou 4: GPS & Galileo 5: GPS & Galileo & GLONASS 6: GPS & Galileo & BeiDou 7: GPS & GLONASS 8: GPS & BeiDou 9: Galileo & GLONASS 10: Galileo & BeiDou 11: GLONASS & BeiDou" REFERENCE "OFS_GNSS_CONSTELLATION_MODE, 1, VARTYPE_BYTE" ::= { dts4150TimeGNSSConfig 1 } dts4150GNSSMaxOffset OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Max GNSS offset to generate an alarm. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_GNSS_ALARM_SOURCE_OFFSET, 4, VARTYPE_DWORD" ::= { dts4150TimeGNSSConfig 2 } dts4150GNSSSurveyInMode OBJECT-TYPE SYNTAX INTEGER { disableFixedPosition (0), fixedPosition (1), manualPosition (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Survey mode for position 0: Disabled, no Fixed Position 1: Fixed Position 2: Manual position" REFERENCE "OFS_GNSS_SURVEYIN_MODE, 1, VARTYPE_BYTE" ::= { dts4150TimeGNSSConfig 10 } dts4150GNSSSurveyInObservationTime OBJECT-TYPE SYNTAX Unsigned32 (0..604800) UNITS "seconds (s)" MAX-ACCESS read-write STATUS current DESCRIPTION "Fixed position minimum observation time (sec)" REFERENCE "OFS_GNSS_SURVEYIN_OBS_TIME, 4, VARTYPE_DWORD" ::= { dts4150TimeGNSSConfig 11 } dts4150GNSSSurveyInObservationAccuracy OBJECT-TYPE SYNTAX Unsigned32 (0..100000) UNITS "millimeter (mm)" MAX-ACCESS read-write STATUS current DESCRIPTION "Fixed position minimum position accuracy (mm)" REFERENCE "OFS_GNSS_SURVEYIN_POS_ACC, 4, VARTYPE_DWORD" ::= { dts4150TimeGNSSConfig 12 } dts4150GNSSSurveyInCommand OBJECT-TYPE SYNTAX INTEGER { noAction (0), deletePositionData (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Survey mode for position 0: None 1: Delete Fixed Position data" REFERENCE "OFS_GNSS_SURVEYIN_POS_CMD, 1, VARTYPE_BYTE" ::= { dts4150TimeGNSSConfig 19 } dts4150GNSSAntennaDelay OBJECT-TYPE SYNTAX Unsigned32 (0..1000) UNITS "nano seconds (ns)" MAX-ACCESS read-write STATUS current DESCRIPTION "Antenna cable delay in nano secconds" REFERENCE "OFS_GNSS_ANTENNA_DELAY, 4, VARTYPE_DWORD" ::= { dts4150TimeGNSSConfig 20 } dts4150GNSSAntennaSupply OBJECT-TYPE SYNTAX INTEGER { voltage5000mV (0), voltage3300mV (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Antenna power supply voltage" REFERENCE "OFS_GNSS_ANTENNA_PWR_SUPPLY, 1, VARTYPE_BYTE" ::= { dts4150TimeGNSSConfig 21 } dts4150GNSSSensSVCount OBJECT-TYPE SYNTAX Unsigned32 (1..20) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum number of satellites required for navigation" REFERENCE "OFS_GNSS_SENS_SV_COUNT, 1, VARTYPE_BYTE" ::= { dts4150TimeGNSSConfig 30 } dts4150GNSSSensSVSigLevel OBJECT-TYPE SYNTAX Unsigned32 (20..40) UNITS "dBHz" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum signal level of satellites required for navigation" REFERENCE "OFS_GNSS_SENS_SV_SIGNAL_LEVEL, 1, VARTYPE_BYTE" ::= { dts4150TimeGNSSConfig 31 } dts4150GNSSConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "GNSS configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_GNSS_CHANGED, 1, VARTYPE_BYTE" ::= { dts4150TimeGNSSConfig 100 } dts4150GNSSConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_GNSS_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4150TimeGNSSConfig 101 } -- ----------------------------------------------------------------- -- -- Time handling - Redundant Link operation -- ----------------------------------------------------------------- -- dts4150TimeRedundantLink OBJECT IDENTIFIER ::= { dts4150TimeHandling 20 } dts4150RedundantLinkMaxOffsetSlaveTimeSource OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) UNITS "nano seconds (ns)" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum time offset from current time to the slave time source to generate an alarm. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_RED_MAX_OFS, 4, VARTYPE_DWORD" ::= { dts4150TimeRedundantLink 3 } dts4150RedundantLinkConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Redundant operation configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_RED_CHANGED, 1, VARTYPE_BYTE" ::= { dts4150TimeRedundantLink 100 } dts4150RedundantLinkConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_RED_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4150TimeRedundantLink 101 } dts4150RedundantLinkManualMasterCmd OBJECT-TYPE SYNTAX INTEGER { auto (0), takeOverMasterRole (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Command to change the slave to master role. 0: Auto 1: Take over the master role" REFERENCE "OFS_RED_MAN_MAS, 1, VARTYPE_BYTE" ::= { dts4150TimeRedundantLink 102 } -- ----------------------------------------------------------------- -- -- Time handling - PTP configuration sets -- ----------------------------------------------------------------- -- dts4150TimePTPConfig OBJECT IDENTIFIER ::= { dts4150TimeHandling 30 } dts4150TimePTPConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4150TimePTPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with ptp configuration sets" REFERENCE "OFS_PTP1_MODE, 1, 3, 2, 22, { {88,VARTYPE_STRUCTARR}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}, {4,VARTYPE_INTEGER}}" ::= { dts4150TimePTPConfig 1 } dts4150TimePTPConfigEntry OBJECT-TYPE SYNTAX Dts4150TimePTPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4150TimePTPConfigIndex } ::= { dts4150TimePTPConfigTable 1 } Dts4150TimePTPConfigEntry ::= SEQUENCE { dts4150TimePTPConfigIndex Integer32, dts4150PTPMode INTEGER, dts4150PTPProfile INTEGER, dts4150PTPDelayMechanism INTEGER, dts4150PTPTranspProto INTEGER, dts4150PTPIPv6Scope Unsigned32, dts4150PTPLeapOffset Unsigned32, dts4150PTPPriority1 Unsigned32, dts4150PTPPriority2 Unsigned32, dts4150PTPDomain Unsigned32, dts4150PTPAnnounceInterval Integer32, dts4150PTPSyncInterval Integer32, dts4150PTPAnnounceTO Integer32, dts4150PTPSyncReceiptTO Integer32, dts4150PTPDelayRequestInterval Integer32, dts4150PTPUDPTTL Integer32, dts4150PTPUnicastMasterOnly EnabledDisabled, dts4150PTPUnicastRequestDuration Integer32, dts4150PTPUnicastLocalPriority Integer32, dts4150PTPQueryInterval Integer32, dts4150PTPPowerGmID Integer32, dts4150PTPPowerAltTimeOfs Integer32 } dts4150TimePTPConfigIndex OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the PTP configuration(only virtual). Valid index = 1 .. 3" ::= { dts4150TimePTPConfigEntry 1 } dts4150PTPMode OBJECT-TYPE SYNTAX INTEGER { off (0), mastermulticastonestep(1), mastermulticasttwostep(2), masterunicastonestep(3), masterunicasttwostep(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP mode 0: Off 1: Master Multicast 1-step 2: Master Multicast 2-step 3: Master Unicast 1-step 4: Master Unicast 2-step" ::= { dts4150TimePTPConfigEntry 2 } dts4150PTPProfile OBJECT-TYPE SYNTAX INTEGER { none (0), defaultE2E (1), defaultP2P (2), utility (3), itutG82651 (4), itutG82751 (5), itutG82752 (6), ieee8021as (7) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP profile. 0: none 1: default E2E 2: default P2P 3: utility 4: ITU-T G.8265.1 5: ITU-T G.8275.1 6: ITU-T G.8275.2 7: IEEE 802.1AS" ::= { dts4150TimePTPConfigEntry 3 } dts4150PTPDelayMechanism OBJECT-TYPE SYNTAX INTEGER { e2e (0), p2p (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP delay mechanism. 0: E2E 1: P2P" ::= { dts4150TimePTPConfigEntry 4 } dts4150PTPTranspProto OBJECT-TYPE SYNTAX INTEGER { ipv4 (0), ipv6 (1), layer2 (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP transport protocol 0: IPv4 1: IPv6 2: Layer 2" ::= { dts4150TimePTPConfigEntry 5 } dts4150PTPIPv6Scope OBJECT-TYPE SYNTAX Unsigned32 (0..14) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP IPv6 mcast scope" ::= { dts4150TimePTPConfigEntry 6 } dts4150PTPLeapOffset OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "PTP leap offset (TAI-UTC)" ::= { dts4150TimePTPConfigEntry 7 } dts4150PTPPriority1 OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP priority 1" ::= { dts4150TimePTPConfigEntry 8 } dts4150PTPPriority2 OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP priority 2" ::= { dts4150TimePTPConfigEntry 9 } dts4150PTPDomain OBJECT-TYPE SYNTAX Unsigned32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP domain number" ::= { dts4150TimePTPConfigEntry 10 } dts4150PTPAnnounceInterval OBJECT-TYPE SYNTAX Integer32 (-7..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Announce interval. Interval = 2 power of value (2^value) E.g. Value = 4 --> Interval = 16 seconds Range: -7 .. 7" ::= { dts4150TimePTPConfigEntry 11 } dts4150PTPSyncInterval OBJECT-TYPE SYNTAX Integer32 (-7..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Syc interval. Interval = 2 power of value (2^value) E.g. Value = -1 --> Interval = 0.5 seconds Range: -7 .. 7" ::= { dts4150TimePTPConfigEntry 12 } dts4150PTPAnnounceTO OBJECT-TYPE SYNTAX Integer32 (2..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Announce timeout in seconds" ::= { dts4150TimePTPConfigEntry 13 } dts4150PTPSyncReceiptTO OBJECT-TYPE SYNTAX Integer32 (2..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Sync timeout in seconds. The number of sync/follow up messages that may go missing before triggering a Best Master Clock election. This option is used for running in gPTP mode according to the 802.1AS-2011 standard." ::= { dts4150TimePTPConfigEntry 14 } dts4150PTPDelayRequestInterval OBJECT-TYPE SYNTAX Integer32 (-7..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Interval between Delay Request messages. Interval = 2 power of value (2^value) E.g. Value = -1 --> Interval = 0.5 seconds Range: -7 .. 7" ::= { dts4150TimePTPConfigEntry 15 } dts4150PTPUDPTTL OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Time to live (TTL) value for IPv4 multicast messages and the hop limit for IPv6 multicast messages." ::= { dts4150TimePTPConfigEntry 16 } dts4150PTPUnicastMasterOnly OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "Prevents the port from entering the SLAVE state. Announce messages received on this port will be ignored. 0: Disable 1: Master only enabled." ::= { dts4150TimePTPConfigEntry 17 } dts4150PTPUnicastRequestDuration OBJECT-TYPE SYNTAX Integer32 (60..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "The service time in seconds to be requested during unicast discovery. Note that the remote node is free to grant a different duration." ::= { dts4150TimePTPConfigEntry 18 } dts4150PTPUnicastLocalPriority OBJECT-TYPE SYNTAX Integer32 (0..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this option is associated with Announce messages arriving on a particular port and is used as a tie breaker whenever clockClass, clockAccuracy, offsetScaledLogVariance, and priority2 are equal." ::= { dts4150TimePTPConfigEntry 19 } dts4150PTPQueryInterval OBJECT-TYPE SYNTAX Integer32 (0..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "This Granmaster-ID is used in the C37.238 power profiles to identify network participants." ::= { dts4150TimePTPConfigEntry 20 } dts4150PTPPowerGmID OBJECT-TYPE SYNTAX Integer32 (0..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "This Granmaster-ID is used in the C37.238 power profiles to identify network participants." ::= { dts4150TimePTPConfigEntry 21 } dts4150PTPPowerAltTimeOfs OBJECT-TYPE SYNTAX Integer32 (0..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this option selects the alternate Time Offset that is sent in a TLV with C37.238 power profiles" ::= { dts4150TimePTPConfigEntry 22 } dts4150PTPTAIUTCOffset OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP leap offset (TAI-UTC)" REFERENCE "OFS_PTP_TAIUTC_OFFSET, 1, VARTYPE_BYTE" ::= { dts4150TimePTPConfig 2 } dts4150PTPSlaveInterface OBJECT-TYPE SYNTAX INTEGER { none (0), lan2 (2), lan3 (3), lan4 (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP Slave ethernet interface 0 = none 2 = LAN2 3 = LAN3 4 = LAN4" REFERENCE "OFS_PTP_SLAVE_INTERFACE, 1, VARTYPE_BYTE" ::= { dts4150TimePTPConfig 10 } dts4150PTPSlaveMaxOffset OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Max offset to PTP Master to generate an alarm. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_PTP_MAX_OFFSET, 4, VARTYPE_DWORD" ::= { dts4150TimePTPConfig 11 } dts4150PTPSlaveUnicastMasterTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4150PTPSlaveUnicastMasterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with PTP slave Unicast master configuration" REFERENCE "OFS_PTP_SLAVE_MASTER_IP1, 1, 8, 2, 2, {{68,VARTYPE_STRUCTARR},{64,VARTYPE_STRING}}" ::= { dts4150TimePTPConfig 12 } dts4150PTPSlaveUnicastMasterEntry OBJECT-TYPE SYNTAX Dts4150PTPSlaveUnicastMasterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4150PTPSlaveUnicastMasterIndex } ::= { dts4150PTPSlaveUnicastMasterTable 1 } Dts4150PTPSlaveUnicastMasterEntry ::= SEQUENCE { dts4150PTPSlaveUnicastMasterIndex Integer32, dts4150PTPSlaveUnicastMasterAddr DTSNetworkName } dts4150PTPSlaveUnicastMasterIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index (only virtual). Valid index = 1 .. 8" ::= { dts4150PTPSlaveUnicastMasterEntry 1 } dts4150PTPSlaveUnicastMasterAddr OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4/IPv6 ptp unicast master address." ::= { dts4150PTPSlaveUnicastMasterEntry 2 } dts4150PTPConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP function configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_PTP_CHANGED, 1, VARTYPE_BYTE" ::= { dts4150TimePTPConfig 100 } dts4150PTPConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_PTP_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4150TimePTPConfig 101 } -- ----------------------------------------------------------------- -- -- Time handling - DCF-HQ source -- ----------------------------------------------------------------- -- dts4150TimeDCFINConfig OBJECT IDENTIFIER ::= { dts4150TimeHandling 40 } dts4150DCFOffsetCorrection OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Offset corection for DCF as time source" REFERENCE "OFS_DCFIN_OFFSET_COR, 4, VARTYPE_DWORD" ::= { dts4150TimeDCFINConfig 10 } dts4150DCFMaxOffset OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Max DCF offset to generate an alarm. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_DCFIN_MAX_OFFSET, 4, VARTYPE_DWORD" ::= { dts4150TimeDCFINConfig 11 } dts4150DCFINConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DCF source configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_DCFIN_CHANGED, 1, VARTYPE_BYTE" ::= { dts4150TimeDCFINConfig 100 } dts4150DCFINConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_DCFIN_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4150TimeDCFINConfig 101 } -- ----------------------------------------------------------------- -- -- Time handling - NTP server -- ----------------------------------------------------------------- -- dts4150TimeNTPServer OBJECT IDENTIFIER ::= { dts4150TimeHandling 80 } -- ----------------------------------------------------------------- -- -- Time handling - NTP server - Source table -- ----------------------------------------------------------------- -- dts4150NTPSourceTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4150NTPSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with NTP time sources" REFERENCE "OFS_NTP_SERVER1, 1, 4, 2, 7, {{84,VARTYPE_STRUCTARR},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_WORD}}" ::= { dts4150TimeNTPServer 1 } dts4150NTPSourceEntry OBJECT-TYPE SYNTAX Dts4150NTPSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4150NTPSourceIndex } ::= { dts4150NTPSourceTable 1 } Dts4150NTPSourceEntry ::= SEQUENCE { dts4150NTPSourceIndex Integer32, dts4150NTPSourceAddr DTSNetworkName, dts4150NTPSourceMinPoll Integer32, dts4150NTPSourceMaxPoll Integer32, dts4150NTPSourceMode Integer32, dts4150NTPSourcePrefer Integer32, dts4150NTPSourceKey Integer32 } dts4150NTPSourceIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the NTP source table (only virtual). Valid index = 1 .. 4" ::= { dts4150NTPSourceEntry 1 } dts4150NTPSourceAddr OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) or fully qualified domain name of the NTP source server." ::= { dts4150NTPSourceEntry 2 } dts4150NTPSourceMinPoll OBJECT-TYPE SYNTAX Integer32 (0 | 1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum poll rate (interval) for this source. Interval = 2 power of value (2^value) E.g. Value = 4 --> Interval = 16 seconds Range: 1 .. 10 0=auto" ::= { dts4150NTPSourceEntry 3 } dts4150NTPSourceMaxPoll OBJECT-TYPE SYNTAX Integer32 (0 | 1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum poll rate (interval) for this source. Interval = 2 power of value (2^value) E.g. Value = 4 --> Interval = 16 seconds Range: 2 .. 10 This poll rate should be higher or the same as the minimum poll rate. 0=auto" ::= { dts4150NTPSourceEntry 4 } dts4150NTPSourceMode OBJECT-TYPE SYNTAX INTEGER { server (0), peer (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "NTP time information request mode. 0: The DTS is a pure client to this source 1: The DTS acts as NTP server in peer mode to this source The peer mode should not be used together with public time servers as source." ::= { dts4150NTPSourceEntry 5 } dts4150NTPSourcePrefer OBJECT-TYPE SYNTAX INTEGER { normal (0), prefered (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0: Normal 1: This source is marked as prefered. Important: Only one source should be prefered." ::= { dts4150NTPSourceEntry 6 } dts4150NTPSourceKey OBJECT-TYPE SYNTAX Integer32 (-1 | 0 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "NTP key for authentication 0=off, 1..65534=key, -1=autokey" ::= { dts4150NTPSourceEntry 7 } -- ----------------------------------------------------------------- -- -- Time handling - NTP server - Broadcast table -- ----------------------------------------------------------------- -- dts4150NTPBroadcastTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4150NTPBroadcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with NTP broadcast configuration" REFERENCE "OFS_NTP_BCASTIP1, 1, 4, 2, 5, {{76,VARTYPE_STRUCTARR},{64,VARTYPE_STRING},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4150TimeNTPServer 2 } dts4150NTPBroadcastEntry OBJECT-TYPE SYNTAX Dts4150NTPBroadcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4150NTPBroadcastIndex } ::= { dts4150NTPBroadcastTable 1 } Dts4150NTPBroadcastEntry ::= SEQUENCE { dts4150NTPBroadcastIndex Integer32, dts4150NTPBroadcastAddr DTSNetworkName, dts4150NTPBrodcastInterval Unsigned32, dts4150NTPBroadcastTTL Unsigned32, dts4150NTPBroadcastKey Integer32 } dts4150NTPBroadcastIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the NTP broadcast entry (only virtual). Valid index = 1 .. 4" ::= { dts4150NTPBroadcastEntry 1 } dts4150NTPBroadcastAddr OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 broadcast or multicast address (xxx.xxx.xxx.xxx) to send out NTP time information." ::= { dts4150NTPBroadcastEntry 2 } dts4150NTPBrodcastInterval OBJECT-TYPE SYNTAX Unsigned32 (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Broadcast / multicast send interval. Interval = 2 power of value (2^value) E.g. Value = 4 --> Interval = 16 seconds" ::= { dts4150NTPBroadcastEntry 3 } dts4150NTPBroadcastTTL OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast time to live value. Range: 1..255" ::= { dts4150NTPBroadcastEntry 4 } dts4150NTPBroadcastKey OBJECT-TYPE SYNTAX Integer32 (-1 | 0 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "NTP broadcast key 0=off, 1..65534=key, -1=autokey" ::= { dts4150NTPBroadcastEntry 5 } dts4150NTPSourceMaxOffset OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..250000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Max DCF offset to generate an alarm. Range 100-250000000ns 0: Alarm offset check disabled" REFERENCE "OFS_NTP_MAX_OFFSET, 4, VARTYPE_DWORD" ::= { dts4150TimeNTPServer 11 } dts4150NTPKeyFileCmd OBJECT-TYPE SYNTAX INTEGER { notDefined (0), importKeysFromFile (1), exportKeysToFile (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Import/export NTP keys. 0: Not defined 1: Import keys from file (/ram directory) 2: Export keys to file (/ram directory)" REFERENCE "OFS_NTP_KEY_FILE_CMD, 1, VARTYPE_BYTE" ::= { dts4150TimeNTPServer 20 } dts4150NTPKeyTrusted OBJECT-TYPE SYNTAX DisplayString (SIZE(0..47)) MAX-ACCESS read-write STATUS current DESCRIPTION "List of NTP trusted keys separated by spaces" REFERENCE "OFS_NTP_KEY_TRUSTED, 48, VARTYPE_STRING" ::= { dts4150TimeNTPServer 21 } dts4150NTPKeyRequest OBJECT-TYPE SYNTAX Integer32 (0 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "NTP request key 0: off 1..65534: key" REFERENCE "OFS_NTP_KEY_REQUEST, 2, VARTYPE_WORD" ::= { dts4150TimeNTPServer 22 } dts4150NTPKeyControl OBJECT-TYPE SYNTAX Integer32 (0 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "NTP control key 0: off 1..65534: key" REFERENCE "OFS_NTP_KEY_CONTROL, 2, VARTYPE_WORD" ::= { dts4150TimeNTPServer 23 } dts4150NTPKeyGeneratorCmd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..49)) MAX-ACCESS read-write STATUS current DESCRIPTION "Command according user manual" REFERENCE "OFS_NTP_KEYGEN_CMD, 50, VARTYPE_STRING" ::= { dts4150TimeNTPServer 24 } dts4150NTPAutokeyPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password for the autokey authentification" REFERENCE "OFS_NTP_AUTOKEY_PW, 15, VARTYPE_STRING" ::= { dts4150TimeNTPServer 25 } dts4150NTPAccessControl OBJECT-TYPE SYNTAX INTEGER { on (0), local (1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Access control for ntp query 0: On (all allowed) 1: Local netwotk only 2: Off (all blocked)" REFERENCE "OFS_NTP_ACCESS_CTL, 1, VARTYPE_BYTE" ::= { dts4150TimeNTPServer 26 } dts4150NTPConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "NTP server configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_NTP_CHANGED, 1, VARTYPE_BYTE" ::= { dts4150TimeNTPServer 100 } dts4150NTPConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_NTP_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4150TimeNTPServer 101 } -- ----------------------------------------------------------------- -- -- Time handling - Manual time set -- ----------------------------------------------------------------- -- dts4150TimeManualSet OBJECT IDENTIFIER ::= { dts4150TimeHandling 90 } dts4150ManualTimeSetUTC OBJECT-TYPE SYNTAX DisplayString (SIZE(17 | 19)) UNITS "Date/Time string hh:mm:ss DD.MM.YY" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the DTS system time (UTC). After set of this variable you have to set the variable dts4150ManualTimeCmd = 1 to submit the time. Format: ASCII string = hh:mm:ss DD.MM.YY" REFERENCE "OFS_MANTIME_UTC, 17, VARTYPE_STRING" ::= { dts4150TimeManualSet 1 } dts4150ManualTimeSetDiff OBJECT-TYPE SYNTAX Integer32 (-1000000000..-10|0|10..1000000000) UNITS "nano seconds (ns)" MAX-ACCESS read-write STATUS current DESCRIPTION "Correct the DTS system time by a difference value. After set of this variable you have to set the variable dts4150ManualTimeCmd = 2 to submit the time." REFERENCE "OFS_MANTIME_DIFF, 4, VARTYPE_DWORD" ::= { dts4150TimeManualSet 2 } dts4150ManualTimeCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), setTime (1), correctTime (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Change command to set the system time manual. 0: No action 1: Set the time by dts4150ManualTimeSetUTC 2: Correct the time by dts4150ManualTimeSetDiff" REFERENCE "OFS_MANTIME_CHANGED, 1, VARTYPE_BYTE" ::= { dts4150TimeManualSet 100 } -- ----------------------------------------------------------------- -- -- Output lines -- ----------------------------------------------------------------- -- dts4150OutputLines OBJECT IDENTIFIER ::= { dts4150MIB 5 } -- ----------------------------------------------------------------- -- -- Output lines - DCF main out -- ----------------------------------------------------------------- -- dts4150OutMainDCF OBJECT IDENTIFIER ::= { dts4150OutputLines 1 } dts4150OutLineMainDCFTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4150OutLineMainDCFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with MainDCF output configuration" REFERENCE "OFS_DCF1_MODE, 1, 1, 2, 3, {{12,VARTYPE_STRUCTARR},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER},{4,VARTYPE_INTEGER}}" ::= { dts4150OutMainDCF 1 } dts4150OutLineMainDCFEntry OBJECT-TYPE SYNTAX Dts4150OutLineMainDCFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the source table. The index number is only virtual and not accessible." INDEX { dts4150OutLineMainDCFIndex } ::= { dts4150OutLineMainDCFTable 1 } Dts4150OutLineMainDCFEntry ::= SEQUENCE { dts4150OutLineMainDCFIndex Integer32, dts4150OutMainDCFMode INTEGER, dts4150OutMainDCFTimezone Unsigned32 } dts4150OutLineMainDCFIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the MainDCF configuration(only virtual). Valid index = 1 .. 1" ::= { dts4150OutLineMainDCFEntry 1 } dts4150OutMainDCFMode OBJECT-TYPE SYNTAX INTEGER { disable (0), dcf (1), pps (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the DCF output line. 0: disabled 1: DCF output 1: 1PPS output" ::= { dts4150OutLineMainDCFEntry 2 } dts4150OutMainDCFTimezone OBJECT-TYPE SYNTAX Unsigned32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Time zone for the generated DCF time code. 0: UTC 1-99: See user manual 800870, time zone table" ::= { dts4150OutLineMainDCFEntry 3 } dts4150OutMainDCFConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DCF output line configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_DCF_CHANGED, 1, VARTYPE_BYTE" ::= { dts4150OutMainDCF 100 } dts4150OutMainDCFConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_DCF_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4150OutMainDCF 101 } -- ----------------------------------------------------------------- -- -- Output lines - Timezone server -- ----------------------------------------------------------------- -- dts4150OutLineTZServer OBJECT IDENTIFIER ::= { dts4150OutputLines 6 } dts4150OutLineTZServerMode OBJECT-TYPE SYNTAX INTEGER { disabled (0), sendNTPMulticast (1), sendNTPAndTimeZoneMulticast (2), sentTimeZoneMulticast (3), answerTimeZoneOnRequest (4), sendEmptyTimeZoneOnce (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode of the timezone server output. 0: disabled 1: send NTP multicast 2: send NTP and time zone table multicast 3: send time zone table multicast 4: answer timezone on request 5: send empty time zone table once" REFERENCE "OFS_TZSERVER_MODE, 1, VARTYPE_BYTE" ::= { dts4150OutLineTZServer 1 } dts4150OutLineTZServerMCastAddr OBJECT-TYPE SYNTAX DTSNetworkName MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 multicast address (xxx.xxx.xxx.xxx) to send out timezone information." REFERENCE "OFS_TZSERVER_MCAST_IP, 63, VARTYPE_STRING" ::= { dts4150OutLineTZServer 2 } dts4150OutLineTZServerMCastPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 multicast port (1..65535) to send out timezone information." REFERENCE "OFS_TZSERVER_MCAST_PORT, 4, VARTYPE_DWORD" ::= { dts4150OutLineTZServer 3 } dts4150OutLineTZServerNTPInterval OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Send interval of the NTP time information for the timezone server. Interval = 2 power of value (2^value) E.g. Value = 4 --> Interval = 16 seconds" REFERENCE "OFS_TZSERVER_POLL, 1, VARTYPE_BYTE" ::= { dts4150OutLineTZServer 4 } dts4150OutLineTZServerTTL OBJECT-TYPE SYNTAX Unsigned32 (1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast time to live value. Range: 1..64" REFERENCE "OFS_TZSERVER_TTL, 1, VARTYPE_BYTE" ::= { dts4150OutLineTZServer 5 } dts4150OutLineTZServerTableInterval OBJECT-TYPE SYNTAX Unsigned32 (10..86400) UNITS "seconds [s]" MAX-ACCESS read-write STATUS current DESCRIPTION "Send interval (repetition time) of the timezone table. Interval in seconds" REFERENCE "OFS_TZSERVER_TOTABLE, 4, VARTYPE_DWORD" ::= { dts4150OutLineTZServer 6 } dts4150OutLineTZServerEntryInterval OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds [s]" MAX-ACCESS read-write STATUS current DESCRIPTION "Send interval (iteration time) of the timezone entries of the timezone table. Interval in seconds" REFERENCE "OFS_TZSERVER_TOENTRY, 1, VARTYPE_BYTE" ::= { dts4150OutLineTZServer 7 } dts4150OutLineTZServerTable OBJECT-TYPE SYNTAX SEQUENCE OF Dts4150OutLineTZServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Timezone server table. 15 entries with the index of the timezone master table or user table." REFERENCE "OFS_TZSERVER_TZTABLE, 1, 15, 2, 2, {{1,VARTYPE_BYTEARR}, {1, VARTYPE_BYTE}}" ::= { dts4150OutLineTZServer 8 } dts4150OutLineTZServerEntry OBJECT-TYPE SYNTAX Dts4150OutLineTZServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry definition of the timezone table. The index number is only virtual and not accessible." INDEX { dts4150OutLineTZTableIndex } ::= { dts4150OutLineTZServerTable 1 } Dts4150OutLineTZServerEntry ::= SEQUENCE { dts4150OutLineTZTableIndex Integer32, dts4150OutLineTZTableEntryNumber Integer32 } dts4150OutLineTZTableIndex OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the timezone server table (only virtual). Valid index = 1 .. 15" ::= { dts4150OutLineTZServerEntry 1 } dts4150OutLineTZTableEntryNumber OBJECT-TYPE SYNTAX Integer32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Time zone for user timezone table entry 0: UTC 1-99: See user manual 800870, time zone table" ::= { dts4150OutLineTZServerEntry 2 } dts4150OutLineTZServerConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Timezone table server output configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_TZSERVER_CHANGED, 1, VARTYPE_BYTE" ::= { dts4150OutLineTZServer 100 } dts4150OutLineTZServerConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_TZSERVER_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4150OutLineTZServer 101 } -- ----------------------------------------------------------------- -- -- Alarm relay -- ----------------------------------------------------------------- -- dts4150AlarmRelayConfig OBJECT IDENTIFIER ::= { dts4150MIB 6 } dts4150RelayAlarmMask OBJECT-TYPE SYNTAX DTSAlarm64 (SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm bit mask for the relay output. Relay output = (Alarms & Alarmmask) > 0" REFERENCE "OFS_AL_RELAY_MASK, 8, VARTYPE_BYTEARR" ::= { dts4150AlarmRelayConfig 1 } dts4150RelayConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm relay configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_AL_CHANGED, 1, VARTYPE_BYTE" ::= { dts4150AlarmRelayConfig 100 } dts4150RelayConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_AL_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4150AlarmRelayConfig 101 } -- ----------------------------------------------------------------- -- -- Alarm mail configuration -- ----------------------------------------------------------------- -- dts4150AlarmMailConfig OBJECT IDENTIFIER ::= { dts4150MIB 7 } dts4150MailMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "Mode of the mail operation. 0: disabled 1: enabled" REFERENCE "OFS_MAIL_MODE, 1, VARTYPE_BYTE" ::= { dts4150AlarmMailConfig 1 } dts4150MailAlarmMask OBJECT-TYPE SYNTAX DTSAlarm64 (SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm bit mask to send mail alarm messages. Alarm mail = (Alarms & Alarmmask) > 0" REFERENCE "OFS_MAIL_MASK, 8, VARTYPE_BYTEARR" ::= { dts4150AlarmMailConfig 2 } dts4150MailServerAddress OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) or fully qualified domain name of the mail server." REFERENCE "OFS_MAIL_SERVER, 64, VARTYPE_STRING" ::= { dts4150AlarmMailConfig 3 } dts4150MailServerPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network port of the mail server." REFERENCE "OFS_MAIL_PORT, 4, VARTYPE_DWORD" ::= { dts4150AlarmMailConfig 4 } dts4150MailAddrDestination1 OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Mail destination address 1. Format: sample@test.com" REFERENCE "OFS_MAIL_DEST1, 64, VARTYPE_STRING" ::= { dts4150AlarmMailConfig 5 } dts4150MailAddrDestination2 OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Mail destination address 2. Format: sample@test.com" REFERENCE "OFS_MAIL_DEST2, 64, VARTYPE_STRING" ::= { dts4150AlarmMailConfig 6 } dts4150MailAddrReply OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Mail reply address. Is used to define the reply address for the recipient. Format: sample@test.com" REFERENCE "OFS_MAIL_REPLY, 64, VARTYPE_STRING" ::= { dts4150AlarmMailConfig 7 } dts4150MailAddrFrom OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Mail sender (from) address. Is normally used to authenticate the sender on the mail server. Format: sample@test.com" REFERENCE "OFS_MAIL_FROM, 64, VARTYPE_STRING" ::= { dts4150AlarmMailConfig 8 } dts4150MailUser OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "User name mail account. Is used to authenticate the sender on the mail server." REFERENCE "OFS_MAIL_USER, 64, VARTYPE_STRING" ::= { dts4150AlarmMailConfig 9 } dts4150MailPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password mail account. Is used to authenticate the sender on the mail server." REFERENCE "OFS_MAIL_PASSWORD, 64, VARTYPE_STRING" ::= { dts4150AlarmMailConfig 10 } dts4150MailAuthMode OBJECT-TYPE SYNTAX INTEGER { off (0), auto (1), plain (2), login (3), cramMD5 (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mode of the mail authentication. 0: Off (mail sender address used) 1: Auto (CRAM-MD5,LOGIN,PLAIN) 2: Plain 3: Login 4: CRAM-MD5" REFERENCE "OFS_MAIL_AUTHMODE, 1, VARTYPE_BYTE" ::= { dts4150AlarmMailConfig 11 } dts4150MailConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm mail configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_MAIL_CHANGED, 1, VARTYPE_BYTE" ::= { dts4150AlarmMailConfig 100 } dts4150MailConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_MAIL_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4150AlarmMailConfig 101 } -- ----------------------------------------------------------------- -- -- SNMP configuration -- ----------------------------------------------------------------- -- dts4150SnmpConfig OBJECT IDENTIFIER ::= { dts4150MIB 8 } dts4150SnmpMode OBJECT-TYPE SYNTAX INTEGER { snmpDisabled (0), snmpV1V2cV3 (1), snmpV2cV3 (2), snmpV3 (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mode of the SNMP operation. 0: disabled 1: SNMP version V1, V2c and V3 2: SNMP version V2c and V3 3: SNMP version V3 only" REFERENCE "OFS_SNMP_MODE, 1, VARTYPE_BYTE" ::= { dts4150SnmpConfig 1 } dts4150SnmpAlarmMask OBJECT-TYPE SYNTAX DTSAlarm64 (SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm bit mask to define the visible alarms by SNMP management system. Alarm status = (Alarms & Alarmmask) > 0" REFERENCE "OFS_SNMP_MASK, 8, VARTYPE_BYTEARR" ::= { dts4150SnmpConfig 2 } dts4150SnmpROCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Read only community string." REFERENCE "OFS_SNMPV12C_ROCOMM, 40, VARTYPE_STRING" ::= { dts4150SnmpConfig 3 } dts4150SnmpRWCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Read / write community string." REFERENCE "OFS_SNMPV12C_RWCOMM, 40, VARTYPE_STRING" ::= { dts4150SnmpConfig 4 } dts4150SnmpTrapMode OBJECT-TYPE SYNTAX EnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "Mode of the SNMP notification operation. 0: disabled 1: enabled" REFERENCE "OFS_TRAP_MODE, 1, VARTYPE_BYTE" ::= { dts4150SnmpConfig 5 } dts4150SnmpTrapAlarmMask OBJECT-TYPE SYNTAX DTSAlarm64 (SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm bit mask to send snmp alarm messages. Alarm notification = (Alarms & Alarmmask) > 0" REFERENCE "OFS_TRAP_MASK, 8, VARTYPE_BYTEARR" ::= { dts4150SnmpConfig 6 } dts4150SnmpTrapCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Trap community string." REFERENCE "OFS_TRAP_COMM, 40, VARTYPE_STRING" ::= { dts4150SnmpConfig 7 } dts4150SnmpTrapListenerIPAddress1 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) or fully qualified domain name of the notification listener station." REFERENCE "OFS_TRAP_SERVER1, 64, VARTYPE_STRING" ::= { dts4150SnmpConfig 8 } dts4150SnmpTrapListenerPort1 OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network port of the notification listener station." REFERENCE "OFS_TRAP_PORT1, 2, VARTYPE_WORD" ::= { dts4150SnmpConfig 9 } dts4150SnmpTrapVersion1 OBJECT-TYPE SYNTAX INTEGER { version1 (1), version2c (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Version of the snmp trap/notification for trap destination 1. 1: SNMP Version 1 2: SNMP Version 2c" REFERENCE "OFS_TRAP_VERSION1, 1, VARTYPE_BYTE" ::= { dts4150SnmpConfig 10 } dts4150SnmpTrapListenerIPAddress2 OBJECT-TYPE SYNTAX DTSNetworkName (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network address (xxx.xxx.xxx.xxx) or fully qualified domain name of the trap listener station." REFERENCE "OFS_TRAP_SERVER2, 64, VARTYPE_STRING" ::= { dts4150SnmpConfig 11 } dts4150SnmpTrapListenerPort2 OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network port of the trap listener station." REFERENCE "OFS_TRAP_PORT2, 2, VARTYPE_WORD" ::= { dts4150SnmpConfig 12 } dts4150SnmpTrapVersion2 OBJECT-TYPE SYNTAX INTEGER { version1 (1), version2c (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Version of the snmp trap/notification for trap destination 2. 1: SNMP Version 1 2: SNMP Version 2c" REFERENCE "OFS_TRAP_VERSION2, 1, VARTYPE_BYTE" ::= { dts4150SnmpConfig 13 } dts4150SnmpTrapAliveMsgInterval OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..7200) UNITS "seconds (s)" MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval to send the alive message to the trap listener stations. 0: Alive message disabled >0: Alive message enabled, Range: 1 ... 7200 seconds" REFERENCE "OFS_TRAP_ALIVE_TO, 4, VARTYPE_DWORD" ::= { dts4150SnmpConfig 14 } dts4150SnmpLocation OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Location string" REFERENCE "OFS_SNMP_LOCATION, 40, VARTYPE_STRING" ::= { dts4150SnmpConfig 15 } dts4150SnmpContact OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "Contact string" REFERENCE "OFS_SNMP_CONTACT, 40, VARTYPE_STRING" ::= { dts4150SnmpConfig 16 } -- ----------------------------------------------------------------- -- -- SNMP configuration - SNMPv3 -- ----------------------------------------------------------------- -- dts4150SnmpV3 OBJECT IDENTIFIER ::= { dts4150SnmpConfig 30 } dts4150SnmpV3UserPassword1 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User password string." REFERENCE "OFS_SNMPV3_USERPW1, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 1 } dts4150SnmpV3UserLevel1 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User access level" REFERENCE "OFS_SNMPV3_USERLEVEL1, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 2 } dts4150SnmpV3UserRead1 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User access level" REFERENCE "OFS_SNMPV3_USERREAD1, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 3 } dts4150SnmpV3UserWrite1 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User access level" REFERENCE "OFS_SNMPV3_USERWRITE1, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 4 } dts4150SnmpV3UserPassword2 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User password string." REFERENCE "OFS_SNMPV3_USERPW2, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 5 } dts4150SnmpV3UserLevel2 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User access level" REFERENCE "OFS_SNMPV3_USERLEVEL2, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 6 } dts4150SnmpV3UserRead2 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User access level" REFERENCE "OFS_SNMPV3_USERREAD2, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 7 } dts4150SnmpV3UserWrite2 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "User access level" REFERENCE "OFS_SNMPV3_USERWRITE2, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 8 } dts4150SnmpV3View11 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 1" REFERENCE "OFS_SNMPV3_VIEW1_1, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 11 } dts4150SnmpV3View12 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 1" REFERENCE "OFS_SNMPV3_VIEW1_2, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 12 } dts4150SnmpV3View13 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 1" REFERENCE "OFS_SNMPV3_VIEW1_3, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 13 } dts4150SnmpV3View14 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 1" REFERENCE "OFS_SNMPV3_VIEW1_4, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 14 } dts4150SnmpV3View15 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 1" REFERENCE "OFS_SNMPV3_VIEW1_5, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 15 } dts4150SnmpV3View16 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 1" REFERENCE "OFS_SNMPV3_VIEW1_6, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 16 } dts4150SnmpV3View21 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 2" REFERENCE "OFS_SNMPV3_VIEW2_1, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 21 } dts4150SnmpV3View22 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 2" REFERENCE "OFS_SNMPV3_VIEW2_2, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 22 } dts4150SnmpV3View23 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 2" REFERENCE "OFS_SNMPV3_VIEW2_3, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 23 } dts4150SnmpV3View24 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 2" REFERENCE "OFS_SNMPV3_VIEW2_4, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 24 } dts4150SnmpV3View25 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 2" REFERENCE "OFS_SNMPV3_VIEW2_5, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 25 } dts4150SnmpV3View26 OBJECT-TYPE SYNTAX DisplayString (SIZE(39)) MAX-ACCESS read-write STATUS current DESCRIPTION "View 2" REFERENCE "OFS_SNMPV3_VIEW2_6, 40, VARTYPE_STRING" ::= { dts4150SnmpV3 26 } dts4150SnmpV3ConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP v3 configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_SNMPV3_CHANGED, 1, VARTYPE_BYTE" ::= { dts4150SnmpV3 100 } dts4150SnmpV3ConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_SNMPV3_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4150SnmpV3 101 } dts4150SnmpConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction (0), saveConfiguration (1), restoreOldConfiguration (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP configuration changed command variable. 0: No action 1: Save configuration 2: Restore the old configuration" REFERENCE "OFS_SNMP_CHANGED, 1, VARTYPE_BYTE" ::= { dts4150SnmpConfig 100 } dts4150SnmpConfigChangedTime OBJECT-TYPE SYNTAX TimeTicks UNITS "Time ticks in 1/100th seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last configuration change." REFERENCE "OFS_SNMP_UPDTIME, 4, VARTYPE_DWORD" ::= { dts4150SnmpConfig 101 } -- ----------------------------------------------------------------- -- -- SNMP configuration - Current alarm information -- ----------------------------------------------------------------- -- dts4150SnmpCurrentAlarmInfo OBJECT IDENTIFIER ::= { dts4150SnmpConfig 1000 } dts4150TrapAlMsgErrorNr OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "Error number of the trap message." REFERENCE "OFS_TRAP_ERRORNBR, 1, VARTYPE_BYTE" ::= { dts4150SnmpCurrentAlarmInfo 1 } dts4150TrapAlMsgErrorState OBJECT-TYPE SYNTAX INTEGER { off (0), on (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Error state of the trap message." REFERENCE "OFS_TRAP_ERRORSTATE, 1, VARTYPE_BYTE" ::= { dts4150SnmpCurrentAlarmInfo 2 } dts4150TrapAlMsgErrorTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "Seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Error time of the trap message. Seconds since 1.1.1970 00:00:00" REFERENCE "OFS_TRAP_ERRORTIME, 4, VARTYPE_DWORD" ::= { dts4150SnmpCurrentAlarmInfo 3 } dts4150TrapAlMsgErrorText OBJECT-TYPE SYNTAX DisplayString (SIZE(1..59)) MAX-ACCESS read-only STATUS current DESCRIPTION "Error text of the trap message." REFERENCE "OFS_TRAP_MESSAGE, 60, VARTYPE_STRING" ::= { dts4150SnmpCurrentAlarmInfo 4 } -- ----------------------------------------------------------------- -- -- MIBv3 conformance -- ----------------------------------------------------------------- -- dts4150MIBConformance OBJECT IDENTIFIER ::= { dts4150MIB 14160 } dts4150MIBMIBCompliances OBJECT IDENTIFIER ::= { dts4150MIBConformance 1 } dts4150MIBGroups OBJECT IDENTIFIER ::= { dts4150MIBConformance 2 } -- compliance statements dts4150MIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for DTS 4150." MODULE -- this module MANDATORY-GROUPS { dts4150AllNotifications, dts4150AllObjects } ::= { dts4150MIBMIBCompliances 1 } dts4150AllNotifications NOTIFICATION-GROUP NOTIFICATIONS { dts4150StartUp, dts4150Shutdown, dts4150Alarm, dts4150StatusChanged, dts4150ConfigChanged, dts4150Alive } STATUS current DESCRIPTION "This automatically created notification group contains all notifications that do not belong to any other NOTIFICATION-GROUP" ::= { dts4150MIBGroups 1 } dts4150AllObjects OBJECT-GROUP OBJECTS { dts4150SysStatus, dts4150SysAlarms, dts4150Language, dts4150Timezone, dts4150Password, dts4150PowerSupply, dts4150USBPort, dts4150NetInfoPortStatus, dts4150NetInfoPortLink, dts4150NetInfoPortMAC, dts4150NetInfoPortIP1v4, dts4150NetInfoPortSubnet1v4, dts4150NetInfoPortGW1v4, dts4150NetInfoPortIP2v4, dts4150NetInfoPortSubnet2v4, dts4150NetInfoPortGW2v4, dts4150NetInfoPortDNSv4, dts4150NetInfoPortHostname, dts4150NetInfoPortDomain, dts4150NetInfoPortDHCPMode, dts4150NetInfoPortIPv6linklocal, dts4150NetInfoPortIP1v6, dts4150NetInfoPortIP2v6, dts4150NetInfoPortIPGWv6, dts4150NetInfoPortVLANid1, dts4150NetInfoPortVLANid2, dts4150NetInfoPortVLANPCP1, dts4150NetInfoPortVLANPCP2, dts4150NetInfoPortLAGStatus, dts4150NetInfoPortPTPConfig, dts4150NetInfoPortSyncE, dts4150NetInfoLAGIfStatus, dts4150NetInfoLAGIfPollIntervall, dts4150NetInfoLAGIfLACPRate, dts4150NetInfoLAGIfMinLinks, dts4150NetInfoLAGIfAggregatorID, dts4150NetInfoLAGIfAggregatorNrActivePorts, dts4150NetInfoLAGIfAggregatorActorKey, dts4150NetInfoLAGIfPartnerMACAddress, dts4150NetInfoLAGIfSlave1Status, dts4150NetInfoLAGIfSlave1LinkSpeed, dts4150NetInfoLAGIfSlave1LinkDuplex, dts4150NetInfoLAGIfSlave1LinkFailureCount, dts4150NetInfoLAGIfSlave2Status, dts4150NetInfoLAGIfSlave2LinkSpeed, dts4150NetInfoLAGIfSlave2LinkDuplex, dts4150NetInfoLAGIfSlave2LinkFailureCount, dts4150TimeInfoStratum, dts4150TimeInfoLastDrift, dts4150TimeInfoLastQCorr, dts4150TimeInfoTimeSource, dts4150TimeInfoSourceQuality, dts4150TimeInfoSourceOffsetNSec, dts4150TimeInfoLastTime, dts4150TimeInfoSourceJitter, dts4150TimeInfoLeapSecStatus, dts4150TimeInfoLeapSecDate, dts4150TimeInfoLeapSecDir, dts4150TimeInfoLeapSecSource, dts4150TimeInfoLeapSecLastDate, dts4150TimeInfoLeapSecLastDir, dts4150GNSSTimeInfoGNSSState, dts4150GNSSTimeInfoLastTime, dts4150GNSSTimeInfoOffsetSec, dts4150GNSSTimeInfoOffsetNSec, dts4150GNSSTimeInfoValidity, dts4150GNSSTimeInfoSVCount, dts4150GNSSTimeInfoTDOP, dts4150GNSSTimeInfoInternalAccuracy, dts4150GNSSTimeInfoSurveyInMode, dts4150GNSSTimeInfoSurveyInStatus, dts4150GNSSTimeInfoPositionLatitude, dts4150GNSSTimeInfoPositionLongitude, dts4150GNSSTimeInfoPositionHeightAboveSea, dts4150GNSSTimeInfoAntennaDelay, dts4150GNSSTimeInfoFixType, dts4150GNSSTimeInfoLeapSecStatus, dts4150GNSSTimeInfoLeapSecDate, dts4150GNSSTimeInfoLeapSecDir, dts4150GNSSTimeInfoJammingState, dts4150GNSSTimeInfoJammingIndicator, dts4150GNSSTimeInfoAGCMonitor, dts4150GNSSTimeInfoNoisePerMS, dts4150GNSSTimeInfoConfigured, dts4150GNSSTimeInfoPriority, dts4150GNSSTimeInfoState, dts4150GNSSTimeInfoDeviation, dts4150GNSSTimeInfoRating, dts4150RedLinkTimeInfoLinkState, dts4150RedLinkTimeInfoLeapSecStatus, dts4150RedLinkTimeInfoLeapSecDate, dts4150RedLinkTimeInfoLeapSecDir, dts4150RedLinkTimeInfoConfigured, dts4150RedLinkTimeInfoPriority, dts4150RedLinkTimeInfoState, dts4150RedLinkTimeInfoLastTime, dts4150RedLinkTimeInfoOffsetSec, dts4150RedLinkTimeInfoOffsetNSec, dts4150RedLinkTimeInfoDeviation, dts4150RedLinkTimeInfoRating, dts4150PTPTimeInfoLeapSecStatus, dts4150PTPTimeInfoLeapSecDate, dts4150PTPTimeInfoLeapSecDir, dts4150PTPTimeInfoConfigured, dts4150PTPTimeInfoPriority, dts4150PTPTimeInfoState, dts4150PTPTimeInfoLastTime, dts4150PTPTimeInfoOffsetSec, dts4150PTPTimeInfoOffsetNSec, dts4150PTPTimeInfoDeviation, dts4150PTPTimeInfoRating, dts4150DCFTimeInfoSatNbr, dts4150DCFTimeInfoSecCount, dts4150DCFTimeInfoConfigured, dts4150DCFTimeInfoPriority, dts4150DCFTimeInfoState, dts4150DCFTimeInfoLeapSecStatus, dts4150DCFTimeInfoLeapSecDate, dts4150DCFTimeInfoLeapSecDir, dts4150DCFTimeInfoLastTime, dts4150DCFTimeInfoOffsetSec, dts4150DCFTimeInfoOffsetNSec, dts4150DCFTimeInfoDeviation, dts4150DCFTimeInfoRating, dts4150NTPTimeInfoCurrentSource, dts4150NTPTimeInfoSystemOffset, dts4150NTPTimeInfoSourceJitter, dts4150NTPTimeInfoStratum, dts4150NTPTimeInfoFrequency, dts4150NTPTInfoReachable, dts4150NTPTimeInfoLeapSecStatus, dts4150NTPTimeInfoLeapSecDate, dts4150NTPTimeInfoLeapSecDir, dts4150NTPTimeInfoConfigured, dts4150NTPTimeInfoPriority, dts4150NTPTimeInfoState, dts4150NTPTimeInfoLastTime, dts4150NTPTimeInfoOffsetSec, dts4150NTPTimeInfoOffsetNSec, dts4150NTPTimeInfoDeviation, dts4150NTPTimeInfoRating, dts4150OscTimeInfoLockedState, dts4150OscTimeInfoPLLState, dts4150OscTimeInfoPPSTrackingState, dts4150SupplyVoltage1, dts4150SupplyVoltage2, dts4150SysUpdateCmd, dts4150SysBackupCmd, dts4150SysRestoreCmd, dts4150SysRestartCmd, dts4150SysDefaultCmd, dts4150SysAllChanged, dts4150SysCopyFiles, dts4150verFPGA, dts4150verFPGADriver, dts4150verModule, dts4150verLangResource, dts4150verTimezoneTable, dts4150verNTP, dts4150verLinux, dts4150verCLIShell, dts4150verRootFS, dts4150verSNMPMasterAgent, dts4150verSNMPSubAgent, dts4150verApplication, dts4150verPTP4L, dts4150ProdInfoHWCode, dts4150ProdInfoHWName, dts4150ProdInfoHWRevision, dts4150ProdInfoProdNo, dts4150ProdInfoArticleNo, dts4150ProdInfoFirmwareVer, dts4150SysConfigCmd, dts4150SysConfigChangedTime, dts4150NetworkPortLinkMode, dts4150NetworkPortPTPSupport, dts4150NetworkPortPTPConfig, dts4150NetworkPortLAGSupport, dts4150NetworkPortLAGConfig, dts4150NetworkPortSyncESupport, dts4150NetworkPortSyncEConfig, dts4150NetworkPortCfgChanged, dts4150NetworkPortConfigCmd, dts4150NetworkPortConfigChangedTime, dts4150NetworkLAGIFMode, dts4150NetworkLAGIFLACPRate, dts4150NetworkLAGIFMiiMon, dts4150NetworkLAGIFCfgChanged, dts4150NetworkLAGIFConfigCmd, dts4150NetworkLAGIFConfigChangedTime, dts4150NetworkIPCfgMode, dts4150NetworkIPCfgIP1v4, dts4150NetworkIPCfgIPMask1v4, dts4150NetworkIPCfgIPGateway1v4, dts4150NetworkIPCfgIP2v4, dts4150NetworkIPCfgIPMask2v4, dts4150NetworkIPCfgIPGateway2v4, dts4150NetworkIPCfgDHCPMode, dts4150NetworkIPCfgHostname, dts4150NetworkIPCfgDomain, dts4150NetworkIPCfgIPNameserver, dts4150NetworkIPCfgIPv6AutoConf, dts4150NetworkIPCfgIPv6DHCPMode, dts4150NetworkIPCfgIPv6Addr1, dts4150NetworkIPCfgIPv6Prefix1, dts4150NetworkIPCfgIPv6Addr2, dts4150NetworkIPCfgIPv6Prefix2, dts4150NetworkIPCfgIPv6Gateway1, dts4150NetworkIPCfgIPv6Gateway2, dts4150NetworkIPCfgIPv6Nameserver, dts4150NetworkIPCfgVLANMember1, dts4150NetworkIPCfgVLANMember2, dts4150NetworkIPCfgIP1v4RouteDest1, dts4150NetworkIPCfgIP1v4RoutePrefix1, dts4150NetworkIPCfgIP1v4RouteDest2, dts4150NetworkIPCfgIP1v4RoutePrefix2, dts4150NetworkIPCfgIP2v4RouteDest1, dts4150NetworkIPCfgIP2v4RoutePrefix1, dts4150NetworkIPCfgIP2v4RouteDest2, dts4150NetworkIPCfgIP2v4RoutePrefix2, dts4150NetworkIPCfgChanged, dts4150NetworkIPCfgConfigCmd, dts4150NetworkIPCfgConfigChangedTime, dts4150NetworkVLANCfgName, dts4150NetworkVLANCfgID, dts4150NetworkVLANQosBK, dts4150NetworkVLANQosBE, dts4150NetworkVLANQosEE, dts4150NetworkVLANQosCA, dts4150NetworkVLANQosVI, dts4150NetworkVLANQosVO, dts4150NetworkVLANQosIC, dts4150NetworkVLANQosNC, dts4150NetworkVLANQosPCP, dts4150NetworkVLANCfgChanged, dts4150NetworkVLANConfigCmd, dts4150NetworkVLANConfigChangedTime, dts4150TelnetMode, dts4150FTPMode, dts4150SSHMode, dts4150NetServicesConfigCmd, dts4150NetServicesConfigChangedTime, dts4150TSConfigChangedTime, dts4150TimeSourcePriorityType, dts4150TimeSourcePriorityAcc, dts4150TimeSourcePriorityMode, dts4150TSTimezone, dts4150TSStratumMode, dts4150TSStratumErrorLimit, dts4150TSTimeout, dts4150TSStratumTimeout1, dts4150TSOffsetPerStratum, dts4150TSStratumChangeSourceFail, dts4150TSMaxOffsetForTimeValid, dts4150TSAdjustmentMode, dts4150TSMaxAdjusmentSpeed, dts4150TSOffsetSynchOnly, dts4150TSLeapSecMode, dts4150TSLeapSecDate, dts4150TSRTCMode, dts4150TSAlarmBigOffset, dts4150TSConfigCmd, dts4150RedundantLinkMaxOffsetSlaveTimeSource, dts4150RedundantLinkConfigCmd, dts4150RedundantLinkConfigChangedTime, dts4150RedundantLinkManualMasterCmd, dts4150NTPKeyFileCmd, dts4150NTPKeyTrusted, dts4150NTPKeyRequest, dts4150NTPKeyControl, dts4150NTPKeyGeneratorCmd, dts4150NTPAutokeyPassword, dts4150NTPAccessControl, dts4150NTPSourceMaxOffset, dts4150NTPConfigCmd, dts4150NTPConfigChangedTime, dts4150ManualTimeSetUTC, dts4150ManualTimeSetDiff, dts4150ManualTimeCmd, dts4150PTPMode, dts4150PTPProfile, dts4150PTPDelayMechanism, dts4150PTPTranspProto, dts4150PTPIPv6Scope, dts4150PTPPriority1, dts4150PTPPriority2, dts4150PTPDomain, dts4150PTPAnnounceInterval, dts4150PTPSyncInterval, dts4150PTPAnnounceTO, dts4150PTPSyncReceiptTO, dts4150PTPDelayRequestInterval, dts4150PTPUDPTTL, dts4150PTPUnicastMasterOnly, dts4150PTPUnicastRequestDuration, dts4150PTPUnicastLocalPriority, dts4150PTPQueryInterval, dts4150PTPPowerGmID, dts4150PTPPowerAltTimeOfs, dts4150PTPTAIUTCOffset, dts4150PTPSlaveMaxOffset, dts4150PTPSlaveInterface, dts4150PTPSlaveUnicastMasterAddr, dts4150PTPConfigCmd, dts4150PTPConfigChangedTime, dts4150GNSSConstellationMode, dts4150GNSSMaxOffset, dts4150GNSSSurveyInMode, dts4150GNSSSurveyInObservationTime, dts4150GNSSSurveyInObservationAccuracy, dts4150GNSSSurveyInCommand, dts4150GNSSAntennaSupply, dts4150GNSSAntennaDelay, dts4150GNSSSensSVCount, dts4150GNSSSensSVSigLevel, dts4150GNSSConfigCmd, dts4150GNSSConfigChangedTime, dts4150DCFOffsetCorrection, dts4150DCFMaxOffset, dts4150DCFINConfigCmd, dts4150DCFINConfigChangedTime, dts4150OutMainDCFConfigChangedTime, dts4150OutMainDCFMode, dts4150OutMainDCFTimezone, dts4150OutMainDCFConfigCmd, dts4150OutLineTZServerMode, dts4150OutLineTZServerMCastAddr, dts4150OutLineTZServerMCastPort, dts4150OutLineTZServerNTPInterval, dts4150OutLineTZServerTTL, dts4150OutLineTZServerTableInterval, dts4150OutLineTZServerEntryInterval, dts4150OutLineTZServerConfigCmd, dts4150OutLineTZServerConfigChangedTime, dts4150RelayAlarmMask, dts4150RelayConfigCmd, dts4150RelayConfigChangedTime, dts4150MailMode, dts4150MailAlarmMask, dts4150MailServerAddress, dts4150MailServerPort, dts4150MailAddrDestination1, dts4150MailAddrDestination2, dts4150MailAddrReply, dts4150MailAddrFrom, dts4150MailUser, dts4150MailPassword, dts4150MailAuthMode, dts4150MailConfigCmd, dts4150MailConfigChangedTime, dts4150SnmpMode, dts4150SnmpAlarmMask, dts4150SnmpROCommunity, dts4150SnmpRWCommunity, dts4150SnmpTrapMode, dts4150SnmpTrapAlarmMask, dts4150SnmpTrapCommunity, dts4150SnmpTrapListenerIPAddress1, dts4150SnmpTrapListenerPort1, dts4150SnmpTrapVersion1, dts4150SnmpTrapListenerIPAddress2, dts4150SnmpTrapListenerPort2, dts4150SnmpTrapVersion2, dts4150SnmpTrapAliveMsgInterval, dts4150SnmpLocation, dts4150SnmpContact, dts4150SnmpV3UserPassword1, dts4150SnmpV3UserLevel1, dts4150SnmpV3UserRead1, dts4150SnmpV3UserWrite1, dts4150SnmpV3UserPassword2, dts4150SnmpV3UserLevel2, dts4150SnmpV3UserRead2, dts4150SnmpV3UserWrite2, dts4150SnmpV3View11, dts4150SnmpV3View12, dts4150SnmpV3View13, dts4150SnmpV3View14, dts4150SnmpV3View15, dts4150SnmpV3View16, dts4150SnmpV3View21, dts4150SnmpV3View22, dts4150SnmpV3View23, dts4150SnmpV3View24, dts4150SnmpV3View25, dts4150SnmpV3View26, dts4150SnmpV3ConfigChangedTime, dts4150SnmpV3ConfigCmd, dts4150SnmpConfigCmd, dts4150SnmpConfigChangedTime, dts4150TrapAlMsgErrorNr, dts4150TrapAlMsgErrorState, dts4150TrapAlMsgErrorTime, dts4150TrapAlMsgErrorText, dts4150NTPSourceAddr, dts4150NTPSourceMinPoll, dts4150NTPSourceMaxPoll, dts4150NTPSourceMode, dts4150NTPSourcePrefer, dts4150NTPSourceKey, dts4150NTPBroadcastAddr, dts4150NTPBrodcastInterval, dts4150NTPBroadcastTTL, dts4150NTPBroadcastKey, dts4150OutLineTZTableEntryNumber } STATUS current DESCRIPTION "This automatically created object group contains all those objects that do not belong to any other OBJECT-GROUP" ::= { dts4150MIBGroups 2 } dts4150AllObsoleteObjects OBJECT-GROUP OBJECTS { dts4150PTPLeapOffset } STATUS obsolete DESCRIPTION "This automatically created object group contains all those objects that have status obsolete" ::= { dts4150MIBGroups 3 } END